• 대한화학회지
• /
• 제67권6호
• /
• pp.415-419
• /
• 2023

In this study, we report the one-pot synthesis of reduced graphene oxide (rGO) containing platinum nanoparticles with catalytic activity to break down hydrogen peroxide as a peroxidase-mimicking catalyst. A single reducing agent was used to reduce graphene oxide and a platinum precursor at a moderately low temperature of 70℃. The rGO was homogeneously decorated with platinum nanoparticles. The catalytic activity of Pt-rGO was investigated for the oxidation of 3,3',5,5'- tetramethylbenzidine (TMB), a peroxidase substrate, in the presence of hydrogen peroxide. The Pt-rGO coupled with glucose oxidase was also able to detect glucose at millimolar concentrations (up to 1 mM). Our results show that the Pt-rGO composite is a promising catalyst for the detection of hydrogen peroxide. This method was also applied for the detection of glucose.

• 한국수소및신에너지학회논문집
• /
• 제17권1호
• /
• pp.21-30
• /
• 2006

[ $M/Fe_2O_3$ ] (M=Rh, Ce and Zr) mixed oxides were prepared using urea method to develop a medium for chemical hydrogen storage by their redox cycles. And their redox behaviors by repeated cycles were studied using temperature programmed reaction(TPR) technique. Additives such as Rh, Ce and Zr were added to iron oxides in order to lower the reaction temperature for reduction by hydrogen and re-oxidation by water-splitting. From the results, concentration of urea used as a precipitant had little effect on particle size and reduction property of iron oxide. TPR patterns of iron oxide consisted of two reduction peaks due to the course of $Fe_2O_3\;{\rightarrow}\;Fe_3O_4\;{\rightarrow}\;Fe$. The results of repeated redox tests showed that Rh added to iron oxide have an effect on lowering the re-oxidation temperature by water-splitting. Meanwhile, Ce and Zr additives played an important role in prevention of deactivation by repeated cycles. Finally, Fe-oxide(Rh, Ce, Zr) sample added with Rh, Ce and Zr showed the lowest re-oxidation temperature by water-splitting and maintained high $H_2$ recovery in spite of the repeated redox cycles. Consequently, it is expected that Fe-oxide(Rh, Ce, Zr) sample can be a feasible medium for chemical hydrogen storage using redox cycle of iron oxide.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.1-7
• /
• 2010

Solid oxide fuel cells (SOFCs) have been under development for a variety of power generation applications. Power system sizes considered range from small watt-size units (e.g., 50-W portable devices) to very large multi-megawatt systems (e.g., 500-MW base load power plants). Because of the reversibility of its operation, the SOFC has also been developed to operate under reverse or electrolysis mode for hydrogen production from steam (In this case, the cell is referred to as solid oxide electrolysis cell or SOEC.). Potential applications for the SOEC include on-site and large-scale hydrogen production. One critical requirement for practical uses of these systems is long-term performance stability under specified operating conditions. Intrinsic material properties and operating environments can have significant effects on cell performance stability, thus performance degradation rate. This paper discusses potential applications of the SOFC/SOEC, technological status and current research and development (R&D) direction, and certain aspects of long-term performance degradation in the operation of SOFCs/SOECs for power generation/hydrogen production.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.52.1-52.1
• /
• 2009

Cupric oxide (CuO) is a p-type semiconductor with band gap of ~1.7 eV and reported to be suitable for catalysis, lithium-copper oxide electrochemical cells, and gas sensors applications. The nanoparticles, plates and nanowires of CuO were found sensing to NO2, H2S and CO. In this work, we report about the comparison about hydrogen sensing of nano thin film and nanowires structured CuO deposited on single-walled carbon nanotubes (SWNTs). The thin film and nanowires are synthesized by deposition of Cu on different substrate followed by oxidation process. Nano thin films of CuO are deposited on thermally oxidized silicon substrate, whereas nanowires are synthesized by using a porous thin film of SWNTs as substrate. The hydrogen sensing properties of synthesized materials are investigated. The results showed that nanowires cupric oxide deposited on SWNTs showed higher sensitivity to hydrogen than those of nano thin film CuO did.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.157.2-157.2
• /
• 2011

In this work, we prepared Mg nanoparticles loaded graphite oxide (Mg-G) as a function of Mg content in order to investigate hydrogen storage behaviors. The structure and morphology of the Mg-G samples were characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The textural properties of the samples were evaluated using $N_2$/77 K adsorption isotherms. The hydrogen adsorption capacities were investigated at 298 K/10 MPa. As a result, the hydrogen adsorption capacities of the Mg-G were enhanced with increasing the Mg content. Therefore, it was found that the presence of Mg on graphite surfaces created hydrogen-favorable sites, resulting in enhancing the hydrogen adsorption capacity.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.329-334
• /
• 2016

Hydrogen is eco-friendly alternative energy source and the photoelectrochemical water splitting is believed to be one of the promising methods for hydrogen production. Many researchers have studied several potential photocatalysts to increase the photoelectochemical performance efficiency for hydrogen conversion. In this study, the GO (graphene oxide) was prepared by Tour's method and was dispersed in precursor solutions of $WO_3$ and $BiVO_4$. Those precursor solutions were spin-coated on FTO glass and several photocatalyst thin films of $WO_3$, $BiVO_4$ and $WO_3/BiVO_4$ were prepared by calcination. The morphologies of prepared photocatalyst thin films were measured by scanning electron microscope. The photoelectrochemical performances of photocatalyst thin films with rGO (reduced graphene oxide) and without rGO were analyzed systematically.

• Korean Journal of Acupuncture
• /
• 제28권1호
• /
• pp.61-69
• /
• 2011

Objectives : The purpose of this study is to investigate effects of White Ginseng-Ejung-tang acupuncture solution (EJ) on nitric oxide (NO) and of hydrogen peroxide production in RAW 264.7 mouse macrophages stimulated by lipopolysaccharide (LPS). Methods : Cell viability was measured by modified MTT assay. NO production was measured by Griess reagent assay. Hydrogen peroxide production was measured by dihydrorhodamine 123 (DHR) assay. Significant differences were examined by using a Student's t-test. Results : The results of the experiment are as follows. 1. EJ did not show cell toxicity against RAW 264.7 cells for 24 hr incubation at the concentrations of up to $200\;{\mu}g$/mL in RAW 264.7 cells. 2. EJ significantly inhibited NO production for 24 hr incubation in RAW 264.7 cells (p <0.05). 3. EJ significantly inhibited the LPS-induced production of NO for 24 hr incubation in RAW 264.7 cells (p <0.05). 4. EJ significantly inhibited the LPS-induced production of hydrogen peroxide for 16, 24, 40, 48, 64, and 72 hr incubation in RAW 264.7 cells (p <0.05). Conclusions : These results suggest that EJ has an anti-inflammtory property related with its inhibition of NO and hydrogen peroxide production in LPS-induced macrophages.

• 한국수소및신에너지학회논문집
• /
• 제15권3호
• /
• pp.201-207
• /
• 2004

Redox characteristics of metal oxide for hydrogen production by thermochemical water-splitting were investigated. $CuFe_2O_4$ as a redox pair that had a different molar ratio of Cu and Fe were prepared by co-precipitation method. Hydrogen production consisted of water-splitting step and thermal reduction step was performed below 1200K. Redox characteristics of Cu-ferrites were studied using the thermal gravimetric analysis technique. Also, structure change of Cu-ferrite during thermal reduction was investigated using the high temperature controlled XRD. In results, oxygen release of Cu-ferrite during the thermal reduction was initiated at oxygen site combined with Cu. Consequently, oxygen release amount of Cu-ferrite was increased with increase of Cu molar ratio of Cu-ferrite. It was found that thermal reduction of Cu-ferrite was begun at $875^\circ{C}$. It was confirmed that structure of Cu-ferrite was changed to metal and cation excess metal oxide during the thermal reduction step.

• 대한약리학회지
• /
• 제32권3호
• /
• pp.389-397
• /
• 1996

위점막은 위강내에서 생성되는 독성이 강한 활성산소종에 노출된다. Nitric oxide는 glutathione의 항상성을 유지시킴으로써 acetaminophen 유도 간독성에 대한 보호효과를 나타내었다. 본 연구는 hydrogen peroxide로 인한 위선세포 손상에 대한 nitric oxide의 작용을 규명하고자 하였다. Hydrogen peroxide는 ${\beta}-D-glucose$와 glucose oxidase의 반응에 의해 생성시켰으며, 위선세포에 L-arginine, $N^{G}-nitro-L-arginine$ methyl ester 및 $N^G-nitro-L-arginine$을 전처리 한 후, 세포외로 유리되는 지질과산화물 및 nitrite를 정량하고 세포내 glutathione 함량을 측정하였다. 결과로서, glucose/glucose oxidase를 처리한 경우 glucose oxidase 농도의존적으로 지질과산화물 생성은 증가되었으며, nitrite 유리 및 glutathione 함량은 감소되었다. NO synthase의 기질인 L-arginine 전처리시 glucose/glucose oxidase에 의한 지질과산화 및 nitrite 유리 증가와 세포내 glutathione 감소등이 방지되었다. $N^G-nitro-L-arginine$ methyl ester 및 $N^G-nitro-L-arginine$등 NO synthase 억제제들은 세포손상에 보호효과를 나타내지 않았다. 결론적으로 nitric oxide는 hydrogen peroxide로 인한 세포손상에 대한 보호효과가 없으며, 이는 지질과산화 반응 및 세포내 glutathione 고갈등을 억제시킴으로써 이루어진다고 사료된다.

• 한국수소및신에너지학회논문집
• /
• 제20권5호
• /
• pp.416-423
• /
• 2009

High-temperature steam electrolysis (HTSE) using solid oxide cell is a challenging method for highly efficient large-scale hydrogen production as a reversible process of solid oxide fuel cell (SOFC). The overall efficiency of the HTSE hydrogen and synthesis gas production system was analyzed thermo-electrochemically. A thermo-electrochemical model for the hydrogen and synthesis gas production system with solid oxide electrolysis cell (SOEC) and very high temperature gas-cooled reactor (VHTR) was established. Sensitivity analyses with regard to the system were performed to investigate the quantitative effects of key parameters on the overall efficiency of the production system. The overall efficiency with SOEC and VHTR was expected to reach a maximum of 58% for the hydrogen production system and to 62% for synthesis gas production system by improving electrical efficiency, steam utilization rate, waste heat recovery rate, electrolysis efficiency, and thermal efficiency. Therefore, overall efficiency of the synthesis production system has higher efficiency than that of the hydrogen production system.