• Resources Recycling
• /
• v.10 no.6
• /
• pp.9-14
• /
• 2001

A sulfuric acid leaching of $LiCoO_2$as cathodic active materials of lithium ion secondary batteries was investigated in terms of reaction variables. In the absence of a reducing agent, the extraction of cobalt was less than 40% in 2 M sulfuric acid at $75^{\circ}C$ instead of that of lithium could be almost 100% in the same conditions. To improve the Co extraction, hydrogen peroxide was used as a reducing agent in the range 2~20 vol%. When over 10vo1% hydrogen peroxide was added, the extractions of both metals were improved to about 95%. It seems to be due to the reduction of Co(III) to Co(II) that can be readily dissolved. The extractions of Co and Li were increased with increasing $H_2$$SO_4$concentration and temperature, and amount of hydrogen peroxide and with decreasing of pulp density. The optimum leaching conditions were determined at $2 M H_2$$SO_4$concentration, $75^{\circ}C$ operating temperature, 100 g/L. initial pulp density, 20 vol% $H_2$$O_2$addition and 30 min.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.1
• /
• pp.63-70
• /
• 2016

In this study, ash free coals(AFCs) were produced with lignite and anthracite coals in a microwave. The AFCs were analyzed with proximate analysis, fourier transform infrared spectrometry (FTIR), X-ray diffraction analysis, and thermogravimetric analysis (TGA). The extraction yields of the AFCs were 16.4 wt%, 7.6 wt% at lignite and anthracite coal, respectively. The chemical and physical properties of the AFCs were similar regardless of the original coal types. Oxidation behavior of the AFCs was investigated by supplying a mixture of 3g of AFC and 3g of electrolyte into the coin-type molten carbonate fuel cell (MCFC). For the evaluation of AFC fuel performance, electrochemical analysis of the steady-state polarization and step-chronopotentiometry were conducted based on the standard hydrogen fuel (69 mol% $H_2$, 17 mol% $CO_2$, 14 mol% $H_2O$). The AFCs showed similar electrochemical oxidation behaviors regardless of the original coal types. The overvoltage of the AFCs was larger than the hydrogen fuel, although OCV of the AFCs was higher.

• The Journal of Korean Medicine
• /
• v.34 no.4
• /
• pp.12-20
• /
• 2013

Objectives: This study compared Gumiganghwal-tang (GGT) decoctions produced using different pressure levels for various extraction times to determine the optimal extraction conditions through hydrogen ion concentration (pH), total soluble solids content (TSSC), extraction yield, and content of chemical compounds. Methods: Decoctions were prepared by the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min. The pH and TSSC were measured, the extraction yield was calculated, and the amounts of the chemical compounds were determined using high performance liquid chromatography. Results: The higher pressure and longer extraction time decreased the pH value, while those conditions increased TSSC and extraction yield: the decoction produced in 180 min by pressurized method showed the minimum value of pH, but maximum values of TSSC and extraction yield. The chemical compounds showed higher amounts in decoctions produced by non-pressurized methods than pressurized methods and their amounts were decreased over the peak extraction time in both pressurized and non-pressurized methods. The results of regression analysis confirmed the correlative influences of the pressure and extraction time on pH, TSSC, and extraction yield. Conclusions: This study suggests that pressure and extraction time influence the compositional constituents in GGT decoctions, and the non-pressurized method for 120 min should be chosen as the optimal extraction condition for the preparation of GGT decoction.

• Herbal Formula Science
• /
• v.18 no.2
• /
• pp.125-134
• /
• 2010

Objectives : This study was performed to compare the differences between decoctions extracted by different extraction conditions. Methods : Two different decoctions were prepared with pressured or non-pressured extraction conditions for 60, 120 and 180min. The yields of extracts, sugar contents, hydrogen ion concentrations(pH), the contents of reference compounds and individual preferences on Ssanghwa-tang(Shuanghe-tang) were investigated. Results : As extraction time increased, individual preferences for decoctions by pressured extraction tended to increase more than those by non-pressured extraction, and the yields and sugar contents of both decoctions showed the tendency of increase. The pH values of decoctions in pressured conditions were lower than those in non-pressured conditions in all extraction times and both extraction conditions showed decreasing pH values according to increase of extraction times. Of the reference compounds, paeoniflorin showed higher contents in non-pressured conditions than in pressured conditions and the contents of cinnamaldehyde were always lower in non-pressured conditions than in pressured conditions at all time. Conclusions : The decoctions of Ssanghwa-tang(Shuanghe-tang) extracted by pressured or non-pressured extraction for 60, 120, 180min exhibited different individual preferences, yields of extracts, sugar contents, pH, reference compounds contents.

• Herbal Formula Science
• /
• v.22 no.2
• /
• pp.15-24
• /
• 2014

Objectives : Gwakhyangjeonggi-san (GJS) which consists of 13 herbal medicines has been used to treat gastrointestinal disorders caused by common cold. This study was performed to compare GJS decoctions produced using different pressure levels for various extraction times. Methods : Decoctions were prepared by the pressure levels of $0kgf/cm^2$ (non-pressurized) or $1kgf/cm^2$ (pressurized) for 30-180 min. The extraction yield, total soluble solid content (TSSC), and hydrogen ion concentration (pH) were measured, and the contents of the nine marker compounds were determined using high performance liquid chromatography. Results : The higher pressure and longer extraction time significantly increased TSSC value, while decreased the pH value. However, only extraction time affected the extraction yield of pressurized decoction. Variation of the amounts of chemical compounds was shown in pressurized and non-pressurized decoctions during extraction time. The result of regression analysis showed that pressure and extraction time can influence to extraction yield, TSSC, pH, and the content of chemical compounds. Conclusions : This study suggests that the pressure and extraction time can significantly affect the extraction efficiency of components from GJS decoctions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.157-166
• /
• 2017

The Fuel Cell Electric Vehicle(FCEV) is recently evolving into a new trend in the automobile industry due to its relatively higher efficiency and zero greenhouse gas(GHG) emission in the tailpipe, as compared to that of the conventional internal combustion engine vehicles. However, it is important to analyze the whole process of the hydrogen's life cycle(from extraction of feedstock to vehicle operation) in order to evaluate the environmental impact of introducing FCEV upon recognizing that the hydrogen fuel, which is used in the fuel cell stack, is not directly available from nature, but instead, it should be produced from naturally available resources. Among the various hydrogen production methods, ${\sim}54.1%^{8)}$ of marketed hydrogen in Korea is produced from naphtha cracking process in the petrochemical industry. Therefore, in this study, we performed a well-to-wheels(WTW) analysis on the hydrogen fuel cycle for the FCEV application by using the GREET program from the US Argonne National Laboratory with Korean specific data. As a result, the well-to-tank and well-to-wheel GHG emissions of the FCEV are calculated as 45,638-51,472 g $CO_2eq/GJ$ and 65.0-73.4 g $CO_2eq/km$, respectively

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.131-137
• /
• 1998

A composite copper coated powder was generated by pressure hydrogen stripping copper from Kelex 100 solvent extractant in the presence of silica powder. Within the limitation of solvent extraction under constant conditions, both loading level and stripping rate were reproducible. The stripping copper kinetics are reduced from a divalent state to a metallic state and then deposited on the surface of the silica powder. Copper nucleates heterogeneously on the seed particles. They are giving an agglomerated and non - uniform powder.

• Korean Journal of Metals and Materials
• /
• v.47 no.6
• /
• pp.349-355
• /
• 2009

In the solvent extraction of Ru(IV) with Alamine336, it was found that Ru took part in the reaction as $RuCl_{6}_^{2-}$ in the HCl concentration range of 1 to 5 M. Interaction parameter between hydrogen ion and $RuCl_{6}_^{2-}$ was estimated by applying Bromley equation to the extraction data. From the mixed solutions of Pd(II) and Ru(IV), the distribution coefficients of Pd were found to be higher than those of Ru in the experimental ranges. Separation factor between Pd and Ru rapidly increased with the decrease of Alamine336 concentration. About 60% of the Ru from the mixed solutions was extracted by TBP at 8.3 M HCl, while Pd was not extracted in the HCl concentration range of 1.6 to 8.3 M.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.229-234
• /
• 2002

The variation of HAZ toughness with nitrogen content and weld cooling rate was investigated and interpreted in terms of both microstructure and the amount of free nitrogen. The presence of free nitrogen in HAZ was investigated by internal friction measurement and its amount was measured by hydrogen hot extraction analysis. Both nitrogen content and weld cooling rate influenced HAZ microstructure and high toughness was obtained at a mixed microstructure of acicular ferrite, feffite sideplate and polygonal ferrite. If nitrogen content is too low or cooling rate is too fast, bainitic microstructure is obtained and toughness is low. On the other hand, if nitrogen content is too high or cooling rate is too slow, coarse polygonal ferritic microstructure is obtained and toughness is deteriorated again. ill addition to the microstructural change, high nitrogen content also resulted in a large amount of free nitrogen. Therefore, nitrogen content should be kept as low as possible even if the mixed micostructure is obtained. In this experimental condition, the maximum toughness was obtained at 0.006% nitrogen content when weld cooling time ($\Delta$t$_{8}$5/)) is 60s.TEX>5/)) is 60s.

• Korean Journal of Microbiology
• /
• v.35 no.4
• /
• pp.289-295
• /
• 1999

Halotolerant microalga Dunaliella bardawil was reported to massively accumulate the ${\beta}$-carotene, which protects cells from excess light intensity. Maximum specific growth rate of 0.168/hr was achieved when cells were cultivated at 1 N NaCl, pH 8.0, light intensity 80 ${\mu}E/m^{2}/s$, agitation 70rpm. For the effectiv accumulation of ${\beta}$-carotene, ozone ro hydrogen peroxide was added to media which was irradiated with white fuorescent lamps with moderate light intensity of 250 ${\mu}E/m^{2}/s$. As a result, maximum volumetric content of ${\beta}$-carotene was 324 ${\mu}$g/㎖. The ${\beta}$-carotene extraction efficiency of vegetable oils was in the order of olive oil, sesame oil, rice brain oil, corn oil, and soy bean oil. Sonication and warming was effective in ${\mu}$-carotene extraction and finally 96.9% of ${\beta}$ could be extracted using olive oil.