• 자원리싸이클링
• /
• 제10권6호
• /
• pp.9-14
• /
• 2001

폐리튬이온전지의 재활용 일환으로 양극활물질인 $LiCoO_2$로부터 Co와 Li을 회수하기 위하여 황산침출거동을 조사하였다. 황산 2M용액, $75^{\circ}C$ 조건에서 환원제를 첨가하지 않은 경우, $LiCoO_2$로부터 Li가 거의 100% 침출되는 반면에 Co는 같은 조건에서 40% 이하의 침출율을 보였다. Co의 침출율을 향상시키기 위하여 과산화수소를 환원제로 2~20 vol%범위에서 사용하였다 10 vol% 이상의 과산화수소를 첨가하였을 때, Co와 L거 침출율은 모두 95% 이상 이었다. 이는 환원제로서 과산화수소가 Co(III)를 Co(II)로 환원시켜 침출이 용이해졌기 때문으로 생각된다. 황산농도, 온도, 과산화수소 첨가량이 증가함에 따라 Co와 L리 침출율은 증가한 반면에 초기 광액농도가 증가할수록 Co와 L긴 침출율은 감소하였다. 이상의 조업변수 실험을 통하여 코발트계 리튬이온전지의 양극활물질인 $LiCoO_2$의 황산침출에서 황산농도 2 M, 침출온도 $75^{\circ}C$,초기광액농도 100 g/L, 과산화수소 첨가량 20 vol%에서 30분의반응시간이 침출 최적조건으로 생각된다.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.63-70
• /
• 2016

In this study, ash free coals(AFCs) were produced with lignite and anthracite coals in a microwave. The AFCs were analyzed with proximate analysis, fourier transform infrared spectrometry (FTIR), X-ray diffraction analysis, and thermogravimetric analysis (TGA). The extraction yields of the AFCs were 16.4 wt%, 7.6 wt% at lignite and anthracite coal, respectively. The chemical and physical properties of the AFCs were similar regardless of the original coal types. Oxidation behavior of the AFCs was investigated by supplying a mixture of 3g of AFC and 3g of electrolyte into the coin-type molten carbonate fuel cell (MCFC). For the evaluation of AFC fuel performance, electrochemical analysis of the steady-state polarization and step-chronopotentiometry were conducted based on the standard hydrogen fuel (69 mol% $H_2$, 17 mol% $CO_2$, 14 mol% $H_2O$). The AFCs showed similar electrochemical oxidation behaviors regardless of the original coal types. The overvoltage of the AFCs was larger than the hydrogen fuel, although OCV of the AFCs was higher.

• 대한한의학회지
• /
• 제34권4호
• /
• pp.12-20
• /
• 2013

Objectives: This study compared Gumiganghwal-tang (GGT) decoctions produced using different pressure levels for various extraction times to determine the optimal extraction conditions through hydrogen ion concentration (pH), total soluble solids content (TSSC), extraction yield, and content of chemical compounds. Methods: Decoctions were prepared by the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min. The pH and TSSC were measured, the extraction yield was calculated, and the amounts of the chemical compounds were determined using high performance liquid chromatography. Results: The higher pressure and longer extraction time decreased the pH value, while those conditions increased TSSC and extraction yield: the decoction produced in 180 min by pressurized method showed the minimum value of pH, but maximum values of TSSC and extraction yield. The chemical compounds showed higher amounts in decoctions produced by non-pressurized methods than pressurized methods and their amounts were decreased over the peak extraction time in both pressurized and non-pressurized methods. The results of regression analysis confirmed the correlative influences of the pressure and extraction time on pH, TSSC, and extraction yield. Conclusions: This study suggests that pressure and extraction time influence the compositional constituents in GGT decoctions, and the non-pressurized method for 120 min should be chosen as the optimal extraction condition for the preparation of GGT decoction.

• 대한한의학방제학회지
• /
• 제18권2호
• /
• pp.125-134
• /
• 2010

Objectives : This study was performed to compare the differences between decoctions extracted by different extraction conditions. Methods : Two different decoctions were prepared with pressured or non-pressured extraction conditions for 60, 120 and 180min. The yields of extracts, sugar contents, hydrogen ion concentrations(pH), the contents of reference compounds and individual preferences on Ssanghwa-tang(Shuanghe-tang) were investigated. Results : As extraction time increased, individual preferences for decoctions by pressured extraction tended to increase more than those by non-pressured extraction, and the yields and sugar contents of both decoctions showed the tendency of increase. The pH values of decoctions in pressured conditions were lower than those in non-pressured conditions in all extraction times and both extraction conditions showed decreasing pH values according to increase of extraction times. Of the reference compounds, paeoniflorin showed higher contents in non-pressured conditions than in pressured conditions and the contents of cinnamaldehyde were always lower in non-pressured conditions than in pressured conditions at all time. Conclusions : The decoctions of Ssanghwa-tang(Shuanghe-tang) extracted by pressured or non-pressured extraction for 60, 120, 180min exhibited different individual preferences, yields of extracts, sugar contents, pH, reference compounds contents.

• 대한한의학방제학회지
• /
• 제22권2호
• /
• pp.15-24
• /
• 2014

Objectives : Gwakhyangjeonggi-san (GJS) which consists of 13 herbal medicines has been used to treat gastrointestinal disorders caused by common cold. This study was performed to compare GJS decoctions produced using different pressure levels for various extraction times. Methods : Decoctions were prepared by the pressure levels of $0kgf/cm^2$ (non-pressurized) or $1kgf/cm^2$ (pressurized) for 30-180 min. The extraction yield, total soluble solid content (TSSC), and hydrogen ion concentration (pH) were measured, and the contents of the nine marker compounds were determined using high performance liquid chromatography. Results : The higher pressure and longer extraction time significantly increased TSSC value, while decreased the pH value. However, only extraction time affected the extraction yield of pressurized decoction. Variation of the amounts of chemical compounds was shown in pressurized and non-pressurized decoctions during extraction time. The result of regression analysis showed that pressure and extraction time can influence to extraction yield, TSSC, pH, and the content of chemical compounds. Conclusions : This study suggests that the pressure and extraction time can significantly affect the extraction efficiency of components from GJS decoctions.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.157-166
• /
• 2017

The Fuel Cell Electric Vehicle(FCEV) is recently evolving into a new trend in the automobile industry due to its relatively higher efficiency and zero greenhouse gas(GHG) emission in the tailpipe, as compared to that of the conventional internal combustion engine vehicles. However, it is important to analyze the whole process of the hydrogen's life cycle(from extraction of feedstock to vehicle operation) in order to evaluate the environmental impact of introducing FCEV upon recognizing that the hydrogen fuel, which is used in the fuel cell stack, is not directly available from nature, but instead, it should be produced from naturally available resources. Among the various hydrogen production methods, ${\sim}54.1%^{8)}$ of marketed hydrogen in Korea is produced from naphtha cracking process in the petrochemical industry. Therefore, in this study, we performed a well-to-wheels(WTW) analysis on the hydrogen fuel cycle for the FCEV application by using the GREET program from the US Argonne National Laboratory with Korean specific data. As a result, the well-to-tank and well-to-wheel GHG emissions of the FCEV are calculated as 45,638-51,472 g $CO_2eq/GJ$ and 65.0-73.4 g $CO_2eq/km$, respectively

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.131-137
• /
• 1998

구리입자를 코딩한 분말 합성은 Kelex 100 solvent extraction으로부터 silica powder에 수소압력 stripping copper에 의하여 생성하였다. Solvent extraction의 범위내인 일정한 조건에서 loading level과 stripping rate등을 재생하였으며 stripping copper kinetics는 divalent상태에서 metallic 상태로 감소하면서 silica 입자에 침적하였다. Copper들은 seed 입자에 heterogeneous 핵을 형성하면서 이들은 agglomeration 상태로 생성되었고 불균일한 분말로 형성하였다.

• 대한금속재료학회지
• /
• 제47권6호
• /
• pp.349-355
• /
• 2009

In the solvent extraction of Ru(IV) with Alamine336, it was found that Ru took part in the reaction as $RuCl_{6}_^{2-}$ in the HCl concentration range of 1 to 5 M. Interaction parameter between hydrogen ion and $RuCl_{6}_^{2-}$ was estimated by applying Bromley equation to the extraction data. From the mixed solutions of Pd(II) and Ru(IV), the distribution coefficients of Pd were found to be higher than those of Ru in the experimental ranges. Separation factor between Pd and Ru rapidly increased with the decrease of Alamine336 concentration. About 60% of the Ru from the mixed solutions was extracted by TBP at 8.3 M HCl, while Pd was not extracted in the HCl concentration range of 1.6 to 8.3 M.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.229-234
• /
• 2002

The variation of HAZ toughness with nitrogen content and weld cooling rate was investigated and interpreted in terms of both microstructure and the amount of free nitrogen. The presence of free nitrogen in HAZ was investigated by internal friction measurement and its amount was measured by hydrogen hot extraction analysis. Both nitrogen content and weld cooling rate influenced HAZ microstructure and high toughness was obtained at a mixed microstructure of acicular ferrite, feffite sideplate and polygonal ferrite. If nitrogen content is too low or cooling rate is too fast, bainitic microstructure is obtained and toughness is low. On the other hand, if nitrogen content is too high or cooling rate is too slow, coarse polygonal ferritic microstructure is obtained and toughness is deteriorated again. ill addition to the microstructural change, high nitrogen content also resulted in a large amount of free nitrogen. Therefore, nitrogen content should be kept as low as possible even if the mixed micostructure is obtained. In this experimental condition, the maximum toughness was obtained at 0.006% nitrogen content when weld cooling time ($\Delta$t$_{8}$5/)) is 60s.TEX>5/)) is 60s.

• 미생물학회지
• /
• 제35권4호
• /
• pp.289-295
• /
• 1999

Dunaliella bardawil의 적절한 생장과${\beta}$-carotene의 효과적인 축적 조건을 확립하기 위하여 염 농도, pH, 광량, 교반속도, 오존처리, 과산화수소 첨가 등의 영향을 비교하였고, 식용 식물성 기름을 이용한 ${\beta}$-carotene의 추출조건을 비교하였다. D. bardawil의 비생장 속도는 1N NaCl, pH 8.0 광량 80${\mu}$$E/\m^2/s$ , 70rpm 으로 배양 시에 0.168/hr로 최대를 나타냈다. 흰색 형광등을 250${\mu}$$E/\m^2/s$ 로 조사한 경우 ${\beta}$-carotene isomer 축적은 cis isomer가 trans isomer에 비해 높은 증가율을 보였다. ${\beta}$-carotene의 축적을 위하여 50${\mu}$M 과산화수소를 배양 2일 경과 후에 첨가한 경우 대조군의 축적율이 150${\mu}$g/ml인데 비해 324${\mu}$g/ml로, 200ppb로 2시간 오존 처리했을 때 약 1.8배 증가한 270${\mu}$g/ml이었다. 식용기름에 의한 37${\circ}C$에서의 추출효율은 올리브유, 참기름, 미강유, 옥수수유, 대두유의 순서로 나타났으며, 올리브유를 수층 부피의 9배로 첨가하고 50${\circ}C$에서 1시간 동안 sonication한 결과 96.95의 추출효율을 나타내었다.