• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.652-669
• /
• 2014

This paper concerns the kinematic characteristics of a coupling device in a deep-seabed mining system. This coupling device connects the buffer system and the flexible pipe. The motion of the buffer system, flexible pipe and mining robot are affected by the coupling device. So the coupling device should be considered as a major factor when this device is designed. Therefore, we find a stable kinematic device, and apply it to the design coupling device through this study. The kinematic characteristics of the coupling device are analyzed by multi-body dynamics simulation method, and finite element method. The dynamic analysis model was built in the commercial software DAFUL. The Fluid Structure Interaction (FSI) method is applied to build the deep-seabed environment. Hydrodynamic force and moment are applied in the dynamic model for the FSI method. The loads and deformation of flexible pipe are estimated for analysis results of the kinematic characteristics.

• Tribology and Lubricants
• /
• 제1권1호
• /
• pp.69-79
• /
• 1985

Planocentric gears 장치에서 내치차에 pin type의 치형을 사용하고 휠의 치형을 원호로 구성하였을 경우 치의 접촉특성을 탄성유역학적 윤활이론을 도입하여 해석 하였다. 윤활 특성을 개선하기 위하여 물림 위치(meshing position)에 의거한 설계 방법과 치의 모서리 부분 형상을 만곡되게 하는 치형 설계 방법을 제시하고 기존 설계에 의한 장치와 수치적으로 특성을 비교 하였다.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.19-25
• /
• 1997

Abstract [] The prediction of changes in the tidal regime due to the sea dike closure in the Saemankum area was performed using the nonlinear finite element model, TIDE. Based upon an overall comparison of calibrated model results with available field data, the TIDE model behaves well and is good representation of the hydrodynamic of the Saemankum tidal project area. It is shown that the TIDE model does an excellent job of computing the changes of tidal characteristics resulting in sea dike closure in an estuary area.

• 대한기계학회논문집A
• /
• 제29권11호
• /
• pp.1455-1462
• /
• 2005

In this paper, we intend to introduce a nonlinear finite element method based on the fully nonlinear potential flow theory in order to simulate the large amplitude sloshing flow in two-dimensional baffled tank subject to horizontally forced excitation. The free surface is tracked by a direct time differentiation scheme with the four-step predictor-corrector time integration method. The flow velocity is accurately recovered from the velocity potential by second-order least square method. In order to maintain the finite element mesh regularity and total mass, the semi-Lagrangian surface tracking method with area conservation is applied. According to the numerical formulae, we perform the parametric experiments by varying the installation height and the opening width of baffles, in order to examine the effects of baffle on the nonlinear liquid sloshing. From the numerical results, the hydrodynamic characteristics of the large amplitude sloshing are investigated.

• 소음진동
• /
• 제8권5호
• /
• pp.849-855
• /
• 1998

An analysis of lateral hydrodynamic forces of compressor labyrinth seals is presented. Basic equations are derived using a two-control-volume model for compressible flow. Blasius' wall friction-factor formula and jet flow theory are used for the calculaton of wall shear stresses and recirculation velocity in the cavity. Linearized zeroth-order and first-order perturbation equations are developed for a small motion about the centered position by expansion in the eccentricity ratio. Integraton of the resultant first-order pressure distribution over the seal defines the rotordynamic coefficients. As an application a rotordynamic analysis of the balance drum labyrinth seal found in an ethylene regrigeration copmressor is carried out. The rotordynamic characteristic results of the labyrinth seal are presented and compared with other types of seals, honeycomb seal and smooth seal.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.20-27
• /
• 2002

An analysis model for an elliptical fluid film bearing is described. The principles of hydrodynamic lubrication are outlined together with an expanded version of the governing pressure field equation as related to elliptical journal bearing. Finite element method approximations are given for the pressure field equation and a temperature model, both related to the fluid film thickness. The thermal effects in the lubricant viscosity, lubricant film thickness, variation of the journal rotating speed and influence of turbulence are investigated in this paper A finite element model and an iterative computational process are described, whereby full simultaneously converged field solutions for fluid film thickness, temperature, viscosity, pressure, stiffness and damping coefficient are obtained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.888-891
• /
• 2002

This paper presents the lubrication characteristics of a disk type wavy thrust bearing. The hydrodynamic pressure distributions in the fluid film are numerically solved the Reynolds equation and then the bearing load capacity and friction forces acting on the disk are calculated. Especially the effects of number and amplitude of the circumferential waves are investigated for tilted operating conditions. The results showed that the load capacity increases with wave amplitude and optimum wave number exists for given design conditions. Therefore the results can be applied to enhance the lubrication performance of thrust bearing adopted in the scroll compressor.

• 한국항해학회지
• /
• 제16권3호
• /
• pp.33-41
• /
• 1992

Handling performance of a vessel is greatly related with her steering characteristics which consist of two kinds of motion characteristics ; namely course stability and turning ability. The correct prediction of the qualities, especially the steering characteristics is as much important in ship handling as in ship design. It is the purpose of this paper to provide ships handlers better understanding of steering characteristics and then to help them in safe controlling and maneuvering of vessels presenting distinct inherent steering characteristic difference that lies between a fine-form vessel and full-form vessel. The authors calculated dynamic course stabilities of two kinds of ideal models, one of which represents a fine-form ship and the other a full-form ship, based on hydrodynamic data of forces and moments obtained by model tests in maneuvering tanks. The result of calculations indicated that a ship of full-form configuration has inhernet course instability. Though significant nonlinearties affect ship montions in maneuvers, application of linear theory is sufficient for prediction of the maneuvering characteristics of vessels on calm waters for handling reference.

• 수산해양기술연구
• /
• 제16권2호
• /
• pp.61-67
• /
• 1980

Previously, we had experimented on the model of stow net under the various combination including water velocity, spherical floats and elevating floats with the shearing hoods instead of the upper beam, however we couldn't concern with their characteristics. Spherical floats maintain their buoyancy at the same level when the speed increases, only the drag increases and effects some reduction in the fishing height. To eliminate this shortcoming, floats have to some hydrodynamic lifting force which increases with increasing speed. Phillips float with a dish-shaped metal plate welded on at the lower part and synthetic upthrusting float were used for the experiment to compare with their characteristics. Six kinds of model shearing hood depend on the angle of attack were used to test the characteristic of the shearing hood. According to their results, when the angle of attack is 30\ulcorner, the lift and drag coefficient reveal 1. 36, 0.84 respectively. And also experimented on the 5X8cm shearing hood to investigate the suitability for the model stow net.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1997년도 추계학술대회 발표논문집:21세기를 향한 정보통신 기술의 전망
• /
• pp.451-462
• /
• 1997

A 2-dimensional numerical analysis is presented for thermal-electron heat conduction effects upon the electron transport and the drain current-voltage characteristics of submicron GaAs MESFETs, based on the use of a nonstationary hydrodynamic transport model. It is shown that for submicron GaAs MESFETs, electron heat conduction effects are significant on their internal electronic properties and also drain current-voltage characteristics. Due to electron heat conduction effects, the electron energy is greatly one-djmensionalized over the entire device region. Also, the drain current decreases continuously with increasing thermal conductivity in the saturation region of large drain voltages above 1 V. However, the opposite trend is observed in the linear region of small drain voltages below 1 V. Accordingly, for a large thermal conductivity, negative differential resistance drain current characteristics are observed with a pronounced peak of current at the drain voltage of 1 V. On the contrary, for zero thermal conductivity, a Gunn oscillation characteristic is observed at drain voltages above 2 V under a zero gate bias condition.