• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.156-160
• /
• 2004

The extraction rates of plasticizer of LPG high pressure rubber are studied. Submerging solvents are composed of propane, n-butane, n-pentane, n-hexane, n-heptane, propylene, 1,3-butadiene, 1-pentene, 1-hexene, ethanethiol, t-butanethiol, dimethyl sulfide, methyl ethyl sulfide. The relationship between the extraction rate of plasticizer and the descriptors of submerging solvent by using multiple linear regression is as follows; PE(wt%) = 7.5193 - 0.58500Carbon${\sharp}$ + 2.3294DB + 2364SH, (N = 13, F = 24.135, R$^2$ = 0.8894, R$_{adj}^2$ = 0.8526, Variance = 7.588) Plasticizer is well extracted by LPG composed of the high vapour pressure and polarity compounds. The mass of extracted plasticizer becomes increasing in proportion to the contents of thiol sulfur compound and unsaturated hydrocarbon such as propylene and 1,3-butadiene in LPG. While the heavier hydrocarbons are, the less the quantities of plasticizer extracted from rubber are.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.220-229
• /
• 1997

Extraction of valuable light hydrocarbon from atmospheric residue using pentane as a solvent has been carried out. The SIMDIS was used to calculate the true boiling point of atmospheric residue containing complex components before the modeling of the extraction process could by performed. In order to simplify the procedure, modeling was adopted and a lumping method was used, such that a large number of compounds were divided into similar component classes called pseudocomponents. The modeling of the extraction process of the atmospheric residue-pentane system was based on the isothermal flash calculation, and the Peng-Robinson equation of state was used to calculate the fugacity coefficient of vapor and liquid phase during calculation steps of modeling. The agreement between the experiments and the calculations was reasonable considering the uncertainties involved in modeling such complex processes.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.964-971
• /
• 1995

Volatile flavor compounds and free amino acids in untreated and hydrolysate pen shell by-product produced with APL 440 protease were compared by vacuum simultaneous steam distillation-solvent extraction/gas chromatography/mass spectrometry. A total of 109 volatile flavor compounds were detected in hydrolysate (65 compounds) or the 109 volatile flavor compounds were detected in untreated pen shell by-product (88). These compounds were composed of aldehydes(16), ketones(17), alcohols(31), nitrogen containing compounds (16), aromatic hydrocarbon compounds(8), esters(3), and miscellaneous compounds (17). Levels of aldehydes and aromatic hydrocarbons decreased after hydrolysis, whereas levels of nitrogen containing compounds increased 3 times than in untreated pen shell by-product. Taurine, known to be having a physiological function, was accounted for 31.25% of total amino acids in hydrolysate.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.367-373
• /
• 2014

In this study, the reducing agent hydrazine and precipitator NaOH were used with $NiCl_2$ as a starting material in order to compound Ni-based material with spherical nano characteristics; resulting material was used as an anode for SOFC. Synthetic temperature, pH, and solvent amounts were experimentally optimized and the synthesis conditions were confirmed. Also, a 0 ~ 0.15 mole ratio of metal(Co, Fe) was alloyed in order to increase the catalyst activation performance of Ni and finally, spherical nano $Ni_{(1-x)}-M_{(x=0{\sim}0.15)}$(M = Co, Fe) alloy materials were compounded. In order to evaluate the catalyst activation for hydrocarbon fuel, fuel gas(10%/$CH_4$+10%/Air) was added and the responding gas was analyzed with GC(Gas Chromatography). Catalyst activation improvement was confirmed from the 3% hydrogen selectivity and 2.4% methane conversion rate in $Ni_{0.95}-Co_{0.05}$ alloy; those values were 4.4% and 19%, respectively, in $Ni_{0.95}-Fe_{0.05}$ alloy.

• Journal of Hydrogen and New Energy
• /
• v.30 no.6
• /
• pp.567-577
• /
• 2019

Due to the depletion of fossil fuels and environmental pollution, demand for alternative energy is gradually increasing. Among the various methods, a method to convert biomass into alternative fuel has been proposed. The bio-fuel obtained from biomass through pyrolysis process is called pyrolysis oil (PO) or bio-oil. Because PO is difficult to use directly in conventional engines due to its poor fuel properties, various methods have been proposed to upgrade pyrolysis-oil. The simplest approach is to mix it with conventional fossil fuels. However, due to their different polarity of PO and fossil fuel, direct mixing is impossible. To resolve this problem, emulsification of two fuels with a proper surfactant was proposed, but it costs additional time and cost. Alternatively, the use of alcohol fuels as an organic solvent significantly improve the fuel properties such as fuel stability, calorific value and viscosity. In this study, blends of diesel, n-butanol, and coffee ground pyrolysis oil (CGPO) which is one of the promising PO, was applied to diesel generator. Combustion and emissions characteristics of blended fuels were investigated under the entire load range. Experimental results show that ignition delay is similar to that of diesel at high load. Although, hydrocarbon and carbon monoxide emissions are comparable to diesel, significant reduction of nitrogen oxides and particulate matter emissions were observed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.80-80
• /
• 2010

Graphene has attracted tremendous attention for the last a few years due to it fascinating electrical, mechanical, and chemical properties. Up to now, several methods have been developed exclusively to prepare graphene, which include micromechanical cleavage, polycrystalline Ni employing chemical vapor deposition technique, solvent thermal reaction, thermal desorption of Si from SiC substrates, chemical routes via graphite intercalation compounds or graphite oxide. In particular, polycrystalline Ni foil and conventional chemical vapor deposition system have been widely used for synthesis of large-area graphene. [1-3] In this study, synthesis of mono-layer graphene on a Ni foil, the mixing ratio of hydrocarbon ($CH_4$) gas to hydrogen gas, microwave power, and growth time were systemically optimized. It is possible to synthesize a graphene at relatively lower temperature ($500^{\circ}C$) than those (${\sim}1000^{\circ}C$) of previous results. Also, we could control the number of graphene according to the growth conditions. The structural features such as surface morphology, crystallinity and number of layer were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM), transmission electron microscopy (TEM) and resonant Raman spectroscopy with 514 nm excitation wavelength. We believe that our approach for the synthesis of mono-layer graphene may be potentially useful for the development of many electronic devices.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.109-114
• /
• 2005

A bacterium capable of emulsifying hydrocarbon, n-hexadecane, and decreasing surface tension of the culture media using oil collapsing method was isolated. The bacterium was partially identified as Bacillus sp. and named BJS-51. n-Hexadecane was the most effective carbon source for production of biosurfactant. Surface tension was decreased from 76 dyne/cm to 31 dyne/cm and CMD (critical micelle dilution) had the highest value of 5.7 at 3% n-hexadecane. Ammonium phosphate was the most effective nitrogen source, when C/N ratio was 60, surface tension and CMD were 29 dyne/cm and 9.2, respectively. Optimum pH and temperature were 7.2 and $30^{\circ}C$, respectively. Produced biosurfactant was extracted and purified using organic solvent extraction method and preparative HPLC systems. After analysis by various color reaction, this biosurfactant was identified as lipopolysaccharide. Surface tension and CMC (critical micelle concentration) of purified biosurfactant were 27 dyne/cm and 0.08 g/l, repectively. CMD was 9.2, so the yield of biosurfactant was about 0.74 g/l at the optimal conditions. The biosurfactant was very stable at wide range of $pH\;2{\sim}12$ with surface tension $29{\sim}31\;dyne/cm$ and showed $29{\sim}30\;dyne/cm$ of surface tension after heat treatment at $100^{\circ}C$ for 60 min.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.595-601
• /
• 2014

The microstructures of NATM were examined by SEM, FT-IR spectra, tensile properties, mole % of [NCO/OH], and particle size analyzer. Growing concerns in the environment-friendly industries have led to the development of solvent-free formulations that can be cured. We had synthesized NATM(New Austria Tunnel Method) resin having the ability to protect stainless steel against corrosion. Comparing with general NATM resin and coatings, this resin that synthesized with polyurethane and epoxy was highly stronger in intensity and longer durability. Hybrid resin was composed of polyols, MDI, epoxy, silicone surfactant, catalyst and crosslink agent, and fillers. Moreover, fillers such as fume silica not only accelerated the curing rate but also improved the physical property as thermal barriers. The rigid segments of synthetic resin in mechanical properties were due to fume silica and the increase the mole% of [NCO/OH] for corrosion protection. In conclusion, the hybrid resin microstructure with crosslink agent and fume silica are good material for thermosetting coating of metal substrates such as stainless steel.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.639-645
• /
• 2016

We herein report efficient triplet-triplet annihilation upconversion (TTA-UC) achieved in various non-toxic and non-volatile vegetable oils as a UC media using platinum-octaethylporphyrin (PtOEP) and 9,10-diphenylanthracene (DPA) as a sensitizer and acceptor, respectively. Green-to-blue UC was readily achieved from PtOEP/DPA solution in vegetable oils with the quantum yield of 8% without any deoxygenation process. The UC efficiency was found to be significantly dependent on the contents of unsaturated hydrocarbon in vegetable oils and viscosity of the solution, as well. Though the Stern-volmer constant and quantum yield in vegetable oils were measured to be lower than those measured in the deaerated organic solvent, the quenching efficiency was still high enough to be 93%. In the sunflower oil, the UC threshold intensity ($I_{th}$) was approx. $100mW/cm^2$, which is far larger than the sunlight intensity, but we believe that the UC achieved in non-toxic and air-saturated media was still highly applicable to nontraditional visualization techniques such as bioimaging.

• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.252-258
• /
• 1972

Methods of separating yeast cells from oil-water-cell emulsion and subsequent purification of the recovered yeast have been studied. In addition, the results of preliminary feeding experiments in which a yeast grown on gas oil was incorporated into chick rations are reported. According to the present study, it appears that the recovery of the yeasts would be easier at pH 9, since the emulsion is relatively more unstable. A class of surface active agent at a concentration of 0.3% was found to facilitate the separation of the yeast from the emulsion. The use of electrolytes such as NaCl and KCl were found to be most effective in breaking the emulsion. Solvent treatment using iso-propyl alcohol and its azeotropic mixture with hexane at $58^{\circ}C$ are particularly suitable for purification of the yeast. In the feeding experiment it was found that 5 percent of the fishmeal in the control ration could be replaced by the yeast with no adverse effect on performance. However, when 8 percent of the fish meal in the control ration was replaced by the yeast, some effect on live-weight gain of the chicks was observed.