• 상하수도학회지
• /
• 제21권2호
• /
• pp.177-185
• /
• 2007

Hydraulic efficiency($T_{10}/T$) in clearwell is often estimated by L/W ratio. However, this estimation is not accurate because other factors which give an effect on hydraulic efficiency such as shape of basin, diffuser wall and intra-basin is ignored. Therefore, in this research, hydraulic efficiency is predicted by the quantitative analysis of dead zone using CFD simulation in a pilot scale clearwell. The results show that the reason why higher L/W ratio increase the hydraulic efficiency is to decrease the dead zone of linear region which is located between baffles. Diffuser wall or intra-basin also affects on hydraulic efficiency with this process. Also, we conclude that hydraulic efficiency can not be reached to 0.8 or higher.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.546-551
• /
• 2004

An applying Thermodynamic method for the purpose of measuring hydraulic efficiency of pump-motor system, based on IEC60041 code, is not easy to adopt at field test. Even though there were splendid development in measuring technic in discharge measuring through the hydraulic machina lots of unsolved problems concerned in flow-rate are still remain in measuring hydraulic efficiency in hydraulic machine. The key point in measuring hydraulic efficiency is to measure exact flow-rate. So, Thermodynamic methode provides a good solution. This methode measures hydraulic efficiency by detecting the difference of temperature and pressure between the hydraulic process of machine, without measuring flow-rate of pump or turbine. By measuring temperature in mk level and absolute pressure in pascal, we can get a difference of thermodynamic specific energy in Moliere chart before and after of hydraulic process, md that difference is equal to hydraulic loses. Following the standard in proceeding Thermodynamic methode, I hope these trial and records make others be familiar to the thermal methode and make it easer to beginner for trial.

• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.39-45
• /
• 2014

With recent oil price increases, the fuel efficiency of hydraulic excavators has become a serious issue. Researchers have considered weight lightening by high pressurization in order to improve the efficiency of the excavator and pump controlled actuation (PCA) and to reduce pressure loss of hybrid and valves using mechanical inertia. However, high pressurization is not very effective because the excavator operates at a low speed; a hybrid is inefficient because little accumulated inertial energy is accumulated; and PCA is ineffective because control precision and responsibility are low. In this study, a method to minimize air and gas in hydraulic oil has been presented as a simple and new way to increase hydraulic efficiency.

• 한국수자원학회논문집
• /
• 제52권spc2호
• /
• pp.855-863
• /
• 2019

어류의 어도 이용효율평가를 위해서는 유인효율과 통과효율로 분리하여 분석할 때, 각각의 효율을 증대시킬 수 있는 방향으로 어도 설치 및 관리 계획이 수립될 수 있다. 기 설치된 어도는 어류 모니터링을 통해 보다 직접적으로 각각의 효율을 평가할 수 있다. 반면 어도를 계획할 때, 또는 여건상 어류 모니터링이 어려운 경우, 수리해석을 통해 간접적으로 어도 효율을 평가할 수 있다. 본 연구에서는 어도의 효율평가가 가능한 수리해석 기법을 제시하였다. 유인효율 분석에는 어류 물리서식처 모듈이 장착된 River-2D모형을 사용하였고, 효율의 지표로 가중가용면적을 제안하였다. 통과효율 분석에는 자유 수면을 가지고 수리구조물상의 유체거동을 해석할 수 있는 3차원 모형(Flow-3D)을 해석 도구로 이용하였다. 그리고 덕천강 백곡보에 설치된 아이스하버 어도를 선택하여 어도 효율을 가늠해 보았고, 실제 어류 모니터링자료와 비교해 보았다. 그 결과 수리해석 자료를 정량적으로 어도 효율로 치환하기는 어렵지만, 대체적인 경향성 파악에는 도움을 줄 수 있었다.

• 유공압시스템학회논문집
• /
• 제3권4호
• /
• pp.1-7
• /
• 2006

A water hydraulic pump is likely to have serious problems of high leakage, friction and low energy efficiency. A water hydraulic pump has commonly a fixed displacement type and its outlet flow is adjusted by controlling rotation speed of the pump, which can be implemented by using an electric inverter. This study aims to investigate energy efficiency of the water hydraulic pump system which is driven by an electric inverter. The study is based on the experimental results. The pump which is used in the study shows relatively good efficiency and low leakage, low friction as well. The reasons for the good performance of pump is also investigated.

• 대한기계학회논문집A
• /
• 제39권2호
• /
• pp.195-201
• /
• 2015

전기굴삭기는 배터리에 저장된 에너지로 전동기-유압펌프를 구동해서 유압 에너지를 생성하고 이를 작업에 활용한다. 기존 유압굴삭기의 유압펌프는 디젤 엔진의 운전 효율에 최적화된 레귤레이터에 의해 제어되고, 유압펌프 자체의 효율은 고려되지 않았다. 전기굴삭기는 배터리를 에너지원으로 사용하기 때문에 전동기의 효율뿐 아니라 유압펌프의 효율을 함께 고려한 제어가 요구된다. 통합 제어를 위해서 유압펌프와 전동기의 출력과 효율 특성을 분석하여 효율맵을 작성하였고, 이를 바탕으로 최적동작맵을 구성하고 통합 제어 알고리즘을 개발했다. 알고리즘의 효과를 확인하기 위해 전기굴삭기 MILS 를 구성해서 통합 제어 알고리즘을 적용했다. 굴삭기 작업 시뮬레이션 결과는 통합 제어 알고리즘이 시스템 효율을 향상 시켰음을 보여준다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.282-285
• /
• 1997

The torque efficiency of oil hydraulic pump is an important factor for it's performance characteristics. A study on the performance test method of oil hydraulic pump is based on test standard, but there is to be desired an study for double or tandem type oil hydraulic piston pump. So in this study present a test method on the tandem pump for torque efficiency and analysis method of the results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권5호
• /
• pp.46-55
• /
• 1994

The purpose of this research is to construct experimental test set-up and to establish a series of performance test program for the domestically developed hydraulic couplings, and to provide a software to store and utilize these experimental data which can be used to improve the performance of the hydraulic coupling and solve the job problems confronted during operation. The performance test consists of measurement of torque, rpm and efficiency of the hydraulic coupling for three different amounts of working fluid with various loads to the output shaft, and investigating the torque, rpm and efficiency characteristics with respect to these parameters. The results of this study can contribute to the development of variable speed hydraulic coupling and torque converter pursued by the domestic industry.

• 한국분말재료학회지
• /
• 제17권6호
• /
• pp.456-463
• /
• 2010

This paper describes the results of the application of Cr-Diamond-like carbon (DLC) films for efficiency improvement through surface modification of spur gear parts in the hydraulic gear pump. Cr-DLC films were successfully deposited on SCM 415 substrates by a hybrid coating process using linear ion source (LIS) and magnetron sputtering method. The characteristics of the films were systematically investigated using FE-SEM, nano-indentation, sliding tester and AFM instrument. The microstructure of Cr-DLC films turned into the dense and fine grains with relatively preferred orientation. The thickness formed in our Cr buffer layer and DLC coating layer were obtained the 487 nm and $1.14\;{\mu}m$. The average friction coefficient of Cr-DLC films considerably decreased to 0.15 for 0.50 of uncoated SCM415 material. The hardness and surface roughness of Cr-DLC films were measured 20 GPa and 10.76 nm, respectively. And then, efficiency tests were performed on the hydraulic gear pump to investigate the efficiency performance of the Cr-DLC coated spur gear. The experimental results show that the volumetric and mechanical efficiency of hydraulic gear pump using the Cr-DLC spur gear were improved up to 2~5% and better efficiency improvement could be attributed to its excellent microstructure, higher hardness, and lower friction coefficient. This conclusion proves the feasibility in the efficiency improvement of hydraulic gear pump for industrial applications.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.1-8
• /
• 2019

The HPM (High-speed Power Matching) system is an electro-hydraulic control system. It directly controls the swash plate of the pump by selecting four-loop logic based on joystick signals, pump flow, and pressure signal to improve the efficiency and controllability of construction machines. In the NFC (Negative Flow Control) system, a typical pump control system using conventional open center type MCV, the loss is continuously generated by flow through the center bypass line even when the excavator is not in operation. Also, due to the slow response of the pump that indirectly controls the flow rate using the pressure regulator, peak pressure occurs at the start or stop of the operation. Conversely, the HPM system uses an MCV without center-by-pass flow path and the swash plate of a pump for the HPM is controlled by a high-speed proportional flow control valve. As a result, the HPM system minimizes energy loss in standby state of the excavator and enables peak pressure control through rapid electro-hydraulic control of a pump. In this paper, the concept of the HPM system algorithm is introduced and the hydraulic system efficiency is compared with the NFC system using the excavator SAT (System Analysis Tool).