• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.167-177
• /
• 2006

This study was performed to evaluate void ratio, compressive and flexural strength, and pH properties according to the admixture ratio of rice husk ash, aggregate size, and neutral treatment time of porous concrete with an admixture of rice husk ash produced as an agricultural by-product. The SEM results for cement mortar with a 5% rice husk ash admixture for the weight of cement formed more C-S-H hydrates due to the $SiO_2$ present in the applied rice husk ash. According to the results of the SEM test, the $SiO_2$ that was a major chemical element of rice husk ash generated a large amount of calcium hydroxide in the early stage of the hydration process of cement leading to the formation of ettringite. The void ratio of porous concrete with an admixture of rice husk ash decreased with increasing admixture ratio of rice husk ash. In addition, the void ratio of porous concrete with an admixture of rice husk ash decreased compared to porous concrete with no admixture of rice husk ash. The compressive and flexural strength of porous concrete with a 5% and 10% admixture ratio of rice husk ash slightly increased compared to concrete with no admixture of rice husk ash. The pH value of porous concrete rapidly decreased immediately after neutral treatment. Then, it gradually increased and decreased again after 14 days. Also, for neutral treatment, the pH value of porous concrete showed appropriate pH levels(less than 9.5) in all mixtures for planting at 28 curing days.

• The Korea Journal of Herbology
• /
• v.30 no.3
• /
• pp.13-17
• /
• 2015

Objectives : Taraxacum platycarpum H. Dahlstedt has been reported to have several biological properties such as skin hydration and antiinflammation. The purpose of this study was to examine the antidepressive effects of water extract of T. platycarpum (WTP) on an animal model of depression. Methods : In the present study, normal ICR mice (4 weeks) were used, and orally administered with WTP (25, 50 and 100 mg/kg). Depression-like behavior was monitored the forced swimming test (FST) and tail suspension test (TST) in mice. The locomotor activity was evaluated to eliminate the false-positive activity in the open field test (OFT). Fluoxetine, the selective serotonin reuptake inhibitor, as a positive control was intraperitoneally administered at a dose of 15 mg/kg at 30 min before starting the behavioral test. Moreover, we evaluated the effects of WTP on the expression of brain-derived neurotrophic factor (BDNF) and the extracellular signal-regulated kinase (ERK)/ cyclic AMP response-element binding protein (CREB) signaling pathway in the hippocampus using Western blot. Results : The administration of WTP (50 and 100 mg/kg) significantly (P < 0.05, respectively) reduced the immobility time during FST and TST without accompanying changes in locomotor activity by OFT. Furthermore, WTP at dose of 100 mg/kg increased the BDNF expression and the phosphorylation of ERK and CREB in the hippocampus region. Conclusions : These results suggest that WTP has a useful anti-depressant effect through the regulation of BDNF/ERK/CREB signaling pathway.

• Korean Journal of Materials Research
• /
• v.27 no.10
• /
• pp.534-543
• /
• 2017

$Gd_2O_3:Eu^{3+}$ red phosphors were prepared by template method from crystalline cellulose impregnated by metal salt. The crystallite size and photoluminescence(PL) property of $Gd_2O_3:Eu^{3+}$ red phosphors were controlled by varying the calcination temperature and $Eu^{3+}$ mol ratio. The nano dispersion of $Gd_2O_3:Eu^{3+}$ was also conducted with a bead mill wet process. Dependent on the time of bead milling, $Gd_2O_3:Eu^{3+}$ nanosol of around 100 nm (median particle size : $D_{50}$) was produced. As the bead milling process proceeded, the luminescent efficiency decreased due to the low crystallinity of the $Gd_2O_3:Eu^{3+}$ nanoparticles. In spite of the low PL property of $Gd_2O_3:Eu^{3+}$ nanosol, it was observed that the photoluminescent property was recovered after re-calcination. In addition, in the dispersed nanosol treated at $85^{\circ}C$, a self assembly phenomenon between particles appeared, and the particles changed from spherical to rod-shaped. These results indicate that particle growth occurs due to mutual assembly of $Gd(OH)_3$ particles, which is the hydration of $Gd_2O_3$ particles, in aqueous solvent at $85^{\circ}C$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.59-66
• /
• 1988

At the present time, annually about 2 million tons of coal ashes are generated from thermal power plants in Korea, however, they are dumped into ash ponds mixed with sea water very expensively. In this thesis, engineering characteristics of bituminous and anthracite ashes are studied to utilize them as construction materials. The coal ash is non-plactic material and its grain size falls in the range of silt, but it has better soil engineering characteristics than general soils of same grain size. For example, the permeability, shearing strength, CBR, and consolidation properties match to that of sandy soils, moreover, strengthening by hydration can be expected with the lapse of year because of CaO presence in the components. So, utilizing those coal ashes in a productive way as reclamation or banking materials is expected.

• Composites Research
• /
• v.25 no.4
• /
• pp.110-116
• /
• 2012

Recently, the development and field applications of Ternary Blended Cement(TBC), where blast furnace slag and fly ash are recycled in Ordinary Portland Cement(OPC) in order to obtain improvements in the durability and heat of hydration reduction performance in large scale civil structures, have been increasing. Also, there are continuing efforts by construction companies to reduce the construction time with the aim of reducing construction costs. Therefore, there is a need to improve the performance of TBC, which has a relatively slow early strength development. In order to improve the early strength of TBC mortar, the compressive strength, SO3 content, and SEM analysis was determined in this study on mortar with the fineness and content of blast furnace slag and anhydrite regulated. As a result, to secure the early strength of TBC mortar, using blast furnace slag with a fineness of approximately $4,200cm^2/g$, adding 3.5% anhydrite with a fineness of approximately $10,000cm^2/g$, and managing the $SO_3$ content to roughly 3.72% was found to provide the most outstanding early strength properties.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.130-138
• /
• 2015

In this study, to examine the application of cast-in-place of high-flowable and high-strength concrete, an experimental study on the lateral pressure of a formwork was preformed. The experiment specimens, which have different casting height and casting speed were prepared. The lateral pressure and the change of temperature from test specimens were obtained. The maximum lateral pressure was shown to lateral pressure of fresh concrete. Immediately after placing, the lateral pressure starts to decrease and, after 12 hours, it showed a stabilization. The decreased tend of the lateral pressure was similar with normal-strength concrete, which appears stabilization after 3~4 hours from casting completion. The more casting speed is fast, the more maximum lateral pressure is high, but pressure reduction with the lapse of time was nearly similar. In addition, it was found that there was no direct relation between the hydration heat and the lateral pressure reduction.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.518-529
• /
• 1996

To develope chemical heat pump using available energy sources such as solar heat and many kinds of waste thermal energy we have studied the enhancement effect of inserted fins in cylindical packed bed reactor. Two dimensionnal(radial and circumferential) partial differential eqaetions, concerning heat and masstransfer in CaO packed bad, are solved numerically to describe the characteristics of the reaction of fins inserted reactor and heat transfer. The results obtained by numerical analysis about two dimensional profiles of temperature and conversion in the reactant in the packed bed and exothermic heat amount released from the reactor are follows; -. The insertion of fins in reactor can redue the reaction completion time by half. -. The rate of thermochemical reaction depends of the temperature and concentration and it is also governed by the boundary conditions and heat transfer rate in the particle packed bed.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.680-689
• /
• 1995

Rice based infant foods of carrot, of beef, and of egg for 4-6 month old infants were prepared using freeze drying (FD) process. The optimum moisture content prior to FD and the plate temperature in the drier were determined with the use of response surface methodology. For all the infant foods under this study, FD time was longer as the initial moisture content was higher and the plate temperature was lower. Brittleness of the dried infant foods increased as the moisture content decreased and the plate temperature increased. Among the sensory attributes, hydration rate, uniformity, and smoothness were greater with increased moisture content and with decreased plate temperature. Ease to spoon increased as moisture content increased and mouthcoating increased as both the moisture content and the plate temperature increased. Optimum moisture content and plate temperature for the FD of carrot, beef and egg foods were 88.5% and $34^{\circ}C$, 88.5% and $28^{\circ}C$, and 87.3% and $39^{\circ}C$, respectively.

• The Journal of Korean Medicine
• /
• v.30 no.1
• /
• pp.76-82
• /
• 2009

Objectives: Ryodoraku diagnosis has been used frequently since Nakatani invented it in 1950. There are many papers about how to use Ryodoraku diagnosis in many diseases, but there are no studies about the repeatability and reproducibility of the Ryodoraku score. The aim of this study was to investigate the repeatability and reproducibility of the Ryodoraku score. Materials and Methods: There were four examiners who trained for more than a month, and the number of subjects was twenty. Each of the examiners made Ryodoraku diagnosis for ten subjects three times. We analyzed data by SPSS, used Friedman test, Wilcoxon signer rank test and Spearman correlation test. Results: 1. There was no significant difference between first, second, and third Ryodoraku score by Friedman test in examiners A, B, C, and D, so there was repeatability. 2. There was very high correlation on first, second, third Ryodoraku score by Spearman correlation test in examiners A, B, C, and 0, so there was repeatability. 3. There was high ICC among Ryodoraku score by examiners B, C, and D, so there was reproducibility. 4. After observing four examiners' Ryodoraku diagnoses, we could see the discord of measure points, the amount of hydration before examination, the amount of pressure, examination time, or positions of subjects diagnosed with Ryodoraku incorrectly. Conclusion: There is repeatability and reproducibility of Ryodoraku diagnosis. However, it is still important that one examiner carry out the diagnosis if possible. When there are two or more examiners, they should train extensively and follow manuals.

• Environmental Engineering Research
• /
• v.21 no.1
• /
• pp.15-21
• /
• 2016

Magnesium potassium phosphate cement (MKPC) is an effective agent for solidification/stabilization (S/S) technology. To further explore the mechanism of the S/S by MKPC, two kinds of Cd including $Cd(NO_3)_2$ solution (L-Cd) and municipal solid waste incineration fly ash (MSWI FA) adsorbed Cd (S-Cd), were used to compare the effects of the form of heavy metal on S/S. The results showed that all the MKPC pastes had a high unconfined compressive strength (UCS) above 11 MPa. For L-Cd pastes, Cd leaching concentration increased with the increase of Cd content, and decreased with the increase of curing time. With the percentage of MSWI FA below 20%, S-Cd pastes exhibited similar Cd leaching concentrations as those of L-Cd pastes, while when the content of MSWI FA come up to 30%, the Cd leaching concentration increased significantly. To meet the standard GB5085.3-2007, the highest addition of S-Cd was 30% MSWI FA (6% Cd contained), with the Cd leaching concentration of 0.817 mg/L. The S/S of L-Cd is mainly due to chemical fixation, and the hydration compound of Cd was $NaCdPO_4$, while the S/S of S-Cd is due to physical encapsulation, which is dependent on the pore/crack size and porosity of the MKPC pastes.