• The Plant Pathology Journal
• /
• v.19 no.5
• /
• pp.248-252
• /
• 2003

This study was carried out to evaluate potential of Shiranuhi cultivar against inoculation of causal pathogen of citrus canker, Xanthomonas axonopodis pv. citri in Jeju Island by comparing degree of susceptibility of fruits and leaves/twigs, and analysis of incidence of canker disease. Progression of symptom, disease incidence, and percent area of lesion were surveyed for evaluation of resistance. In greenhouse condition, symptoms of bacterial citrus canker progressed more rapidly in sweet orange, a moderately susceptible cultivar, than in other four cultivars (satsuma mandarin, 'Kiyomi', 'Shiranuhi' and 'Yuzu'). At 20 days after inoculation, disease severity was the highest in sweet orange (5.0$\pm$0.0), and all tested leaves were distorted or had dropped. On the other hand, 'Yuzu' showed the lowest disease severity (2.6$\pm$0.47), followed by 'Kiyomi' (4.0$\pm$0.0), 'Shiranuhi' (4.0$\pm$0.82), and satsuma mandarin (4.3$\pm$0.47). Percent area of lesion per leaf 30 days after inoculation was the highest in sweet orange (8.31$\pm$1.78), followed by satsuma mandarin (1.51$\pm$1.25), 'Shiranuhi' (1.39$\pm$0.94), and 'Kiyomi' (1.1$\pm$0.9), while the lowest was in 'Yuzu' (0.26$\pm$0.17). Infield condition, percentage of diseased leaf in 'Shiranuhi' was very low, 5.2$\pm$2.9, compared with sweet orange, 71.0$\pm$ 11.5, while that of satsuma mandarin and 'Kiyomi' were 6.9$\pm$7.0 and 4.3$\pm$2.0, respectively. Percentages of diseased leaf was higher (17.4$\pm$7.1) than that of diseased fruit (3.2$\pm$2.5) in severely diseased trees of Shiranuhi cultivar, and the disease was not observed on twig in open field condition. Lesion sizes on leaves and fruits in open field condition were 4.1$\pm$2.2 mm2 and 5.1$\pm$5.6 mm2, respectively, while those in greenhouse condition were 8.7$\pm$5.7 mm2, 10.4$\pm$9.2 mm2 and 5.6$\pm$2.6 mm2 on leaves, fruits and twigs, respectively. The disease was observed in 5.6% out of total 107 farmers Shiranuhi fields under polyethylene film house, and average percentages of diseased tree in 31 fields of Shiranuhi cultivar and adjacent satsuma mandarin fields were 0.02% and 14.8%, respectively. Average percentage of diseased fruit was 1.6% in satsuma mandarin which was not observed in anyone of all the 31 Shiranuhi farmers fields. Therefore, it was concluded that 'Shiranuhi' cultivar is not potential against causal pathogen of citrus canker disease in Jeju Island because the cultivar has similar resistance as satsuma mandarin which occupies over 95% of total 25,000 ha in Jeju Island in polyethylene film houses protected from outside.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.277-282
• /
• 2010

The study is to verify non-uniform dose distribution in Field-In-Field (FIF) technique using two-dimensional ionization chamber (MatriXX, Wellhofer Dosimetrie, Germany) for breast tangential irradiation. The MatriXX and an inverse planning system (Eclipse, ver 6.5, Varian, Palo Alto, USA) were used. Hybrid plans were made from the original twenty patients plans. To verify the non-uniform dose distribution in FIF technique, each portal prescribed doses (90 cGy) was delivered to the MatriXX. The measured doses on the MatriXX were compared to the planned doses. The quantitative analyses were done with a commercial analyzing tool (OmniPro IMRT, ver. 1.4, Wellhofer Dosimetrie, Germany). The delivered doses at the normalization points were different to average 1.6% between the calculated and the measured. In analysis of line profiles, there were some differences of 1.3-5.5% (Avg: 2.4%), 0.9-3.9% (Avg: 2.5%) in longitudinal and transverse planes respectively. For the gamma index (criteria: 3 mm, 3%) analyses, there were shown that 90.23-99.69% (avg: 95.11%, std: 2.81) for acceptable range ($\gamma$-index $\geq$ 1) through the twenty patients cases. In conclusion, through our study, we have confirmed the availability of the FIF technique by comparing the calculated with the measured using MatriXX. In the future, various clinical applications of the FIF techniques would be good trials for better treatment results.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.145-157
• /
• 2004

The cycle length design model of the Korean traffic responsive signal control systems is devised to vary a cycle length as a response to changes in traffic demand in real time by utilizing parameters specified by a system operator and such field information as degrees of saturation of through phases. Since no explicit guideline is provided to a system operator, the system tends to include ambiguity in terms of the system optimization. In addition, the cycle lengths produced by the existing model have yet been verified if they are comparable to the ones minimizing delay. This paper presents the studies conducted (1) to find shortcomings embedded in the existing model by comparing the cycle lengths produced by the model against the ones minimizing delay and (2) to propose a new direction to design a cycle length minimizing delay and excluding such operator oriented parameters. It was found from the study that the cycle lengths from the existing model fail to minimize delay and promote intersection operational conditions to be unsatisfied when traffic volume is low, due to the feature of the changed target operational volume-to-capacity ratio embedded in the model. The 64 different neural network based cycle length design models were developed based on simulation data surrogating field data. The CORSIM optimal cycle lengths minimizing delay were found through the COST software developed for the study. COST searches for the CORSIM optimal cycle length minimizing delay with a heuristic searching method, a hybrid genetic algorithm. Among 64 models, the best one producing cycle lengths close enough to the optimal was selected through statistical tests. It was found from the verification test that the best model designs a cycle length as similar pattern to the ones minimizing delay. The cycle lengths from the proposed model are comparable to the ones from TRANSYT-7F.

• Korean Security Journal
• /
• no.19
• /
• pp.225-244
• /
• 2009

Electronic security system is composed mainly of electronic-information-communication device, so system technology, configuration and management of the electronic security system could be affected by the change of information-communication environment. This study is to propose the future prospect on the development of technique for electronic security system through the analysis of the trend and the actual condition on the development of technique. This study is based on literature study and interview with user and provider of electronic security system, also survey was carried out by system provider and members of security integration company to come up with more practical result. Hybrid DVR technology that has multi-function such as motion detection, target tracking and image identification is expected to be developed. And 'Embedded IP camera' technology that internet server and image identification software are built in. Those technologies could change the configuration and management of CCTV system. Fingerprint identification technology and face identification technology are continually developed to get more reliability, but continual development of surveillance and three-dimension identification technology for more efficient face identification system is needed. As radio identification and tracking function of RFID is appreciated as very useful for access control system, hardware and software of RFID technology is expected to be developed, but government's support for market revitalization is necessary. Behavior pattern identification sensor technology is expected to be developed and could replace passive infrared sensor that cause system error, giving security guard firm confidence for response. The principle of behavior pattern identification is similar to image identification, so those two technology could be integrated with tracking technology and radio identification technology of RFID for total monitoring system. For more efficient electronic security system, middle-ware's role is very important to integrate the technology of electronic security system, this could make possible of installing the integrated security system.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.1-31
• /
• 1962

The purpose of this treatise is to prove the presence of cystine in silk fiber through wide sampling throughout all the sericultural processes of Bombyx mori.; also to show that disulfide cross linkages exist in the silk fiber. The conclusions reached were as follows: 1. Crystalline cystine was obtained from silk fibroin using Folin's Method. 2. Analytical data showing the cystine content of silk fiber and its related materials were obtained using Sullvan's Method as follows: Material Percent Cystine A. Mulberry leaf protein 0.175 B. Silkworm egg 0.33 C. Silkworm Body, matured, fat extracted, without silk gland 0.41 D. Silk gland, matured 1.23 E. Silkworm feces none F. Silkworm pupa, fat extracted 0.30 G. Silkworm moth, fat extracted 0.60 H. Raw Silk 0.22 I. Fibroin 0.175 J. Sericin 0.30 3. The presence of cystine in the silkworm was substantiated the existence of 0.175 % methionine in mulberry leaves and 0.12% methionine in the silk gland. 4. Part of the sulfhydryl compounds in the silk gland is believed to transfer to serine and methionine, with the former being secreted into the liquid silk finally as silk fiber and the latter used for nutritive purposes in the growing of silk gland tissue. 5. The cystine content is variable by mulberry species, silkworm species, sex, breeding process, and other culturing environments. 6. Hybrid silkworms require more nutritive amino acids for effective growth than the original parents, and secrete less of them as silk fiber. 7. From such an observation, the amino acid composition of silk fiber is believed to be fairly flexible. Cystine if included in the amorphous part of the fiber, especially in sericin. 8. The result from enriching the silkworm diet with pure cystine or wool cystine did not result in any advantage, therefore it is believed that the natural cystine and methionine contents in the mulberry leafaregoodenoughforsilkwormnutrition. 9. The disulfide cross linkage in silk fiber was verified by using the Harris Method. Contraction took place following the treatment of the fiber with various salts and acids. Comparisons were made with wool fiber. 10. During these experiments, the fibrious structure of silk fiber and the net-globular liquid form were photographed microscopically. It is believed that the globules of liquid silk are net-formed by the inter attraction of the OH ion of the globular peptide and the H ion of water as shown by the hair cracking behavior of the film. The net-globular protein precipitation from the mulberry protein solution showed that mulberry is a proper diet for the formation of fibrous protein in the silk fiber. 11. The significance of the presence of cystine in silk fiber as emphasized in this paper should result in modification of the general conception that cystine is absent from this fiber. NOTICE: A part of this treatise was presented at the annual Korea Sericultural Society meeting held in 1961.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.196-203
• /
• 2003

The application of sealants is a highly technique-sensitive procedure, requiring an extremely dry field prior to placement. Moisture contamination of the etched enamel surface before sealant placement is cited as the main reason for sealant failure. The purpose of this study was to evaluate the effects of different methods of sealant application on the shear bond strength of sealants to enamel. In groups 1, 2, 3, 4 Teethmate(unfilled sealant) was used, while Ultraseal XTplus(filled sealant) was used in groups 5, 6, 7, 8. Groups 1 and 5(control) were acid etched for 15 seconds using 35% phosphoric acid, washed and then dried. In groups 2, 6 drying agents were applied, and in groups 3, 7 bonding agents were applied and light cured. In groups 4 and 8 both drying agent and bonding agent were applied. Then sealant was cured to the specimen using molds 3mm in diameter and 2mm in height. Thermocycling was performed and shear bond strength was finally measured. The following results were obtained : 1. Groups using filled sealant(groups 5, 6, 7, 8) showed higher shear bond strengths compared to groups using unfilled sealant(groups 1, 2, 3, 4). 2. Among groups using unfilled sealant(groups 1, 2, 3, 4), groups 2, 3, 4 showed significantly higher shear bond strength compared to group 1(p<0.05). There were no significant differences among groups 2, 3 and 4. 3. There were no significant differences(p>0.05) among groups using filled sealant(groups 5, 6, 7, 8). 4. When modes of fracture were examined, cohesive failure was observed in groups 2, 3 and 4.

• Journal of Mushroom
• /
• v.2 no.3
• /
• pp.115-126
• /
• 2004

Somatic hybrids of inter-compatible and inter-incompatible strains were obtained by protoplast fusion. The fusion products between compatible strains, Pleurotus ostreatus and P. florida, formed heterokaryons, while fusants between incompatible strains such as P. cornucopiae + P. florida, P. ostreatus + Ganoderma applanatum, P. florida + Ganoderma lucidum, and P. ostreatus + Flammulina velutipes formed synkaryons that retained genes from both parents. The heterokaryons showed the same level of basidioma development. In contrast, the synkaryons showed unique characteristics including clamp connection formation at mitosis, either partner basidioma development, and abnormal segregation and recombination compared with inter-compatible strains. Synkaryons can be classified into homokaryoyic and heterokaryotic type. A comparison of somatic hybrids with compatible and incompatible strains was made using random amplified polymorphic DNA (RAPD) analysis. The heterokaryons between compatible species showed the same level of variability and contained both parental RAPD bands. In contrast, most of the synkaryons between incompatible species showed similarity to those of either parental bands and non-parental RAPD bands. Synkaryons can be classified into microgenome insertion type and macrogenome insertion type. A tetrapolar mating system was found among monospore isolates in somatic hybrids and wild type P. ostreatus. Homokaryons from each somatic hybrid combination were paired with tester homokaryons of the initial wild type of P. ostreatus. The changed mating types were identified in progenies. The pattern of mating type switching in somatic hybrids depends on compatibility of fusion partner. There are several factors related to the mechanism of clamp connection formation and fruiting body development of synkaryons. Of these,the major factor may be associated with self-fertility and mating type switching such as homokaryotic fruiting of wild type P. ostreatus. This review will discuss these aspects.

• The Journal of Art Theory & Practice
• /
• no.14
• /
• pp.125-158
• /
• 2012

After liberation from Japanese colonial rule in 1945, there was the three-year period of United States Army Military Government in Korea. In 1948, Democratic People's Republic of Korea, and Republic of Korea were established in the north and south of the Korean Peninsula. The Republic of Korea is now a modern state set in the southern part of the Korean. We usually refer to Koreans as people who belong to the Republic of Korea. Can we say that is true exactly? Why make of this an obsolete question? The period from 1945 when Korea was emancipated from Japanese colonial rule to 1948 when the Republic of Korea was established has not been a focus of modern Korean history. This three years remains empty in Korean history and makes the concept of 'Korean' we usually consider ambiguous, and prompts careful attention to the silence of 'some Koreans' forced to live against their will in the blurred boundaries between nation and people. This dissertation regards 'Koreans' who came to live in the border of nations, especially 'Korean-Japanese third generation women artists'who are marginalized both Japan and Korea. It questions the category of 'Korean women's art' that has so far been considered, based on the concept of territory, and presents a new perspective for viewing 'Korean women's art'. Almost no study on Korean-Japanese women's art has been conducted, based on research on Korean diaspora, and no systematic historical records exist. Even data-collection is limited due to the political situation of South and North in confrontation. Representation of the Mother Country on the Artworks by First and Second-Generation Korean-Japanese(Zainich) Women Artists after Liberation since 1945 was published in 2011 is the only dissertation in which Korean-Japanese women artists, and early artistic activities. That research is based on press releases and interviews obtained through Japan. This thesis concentrates on the world of Korean-Japanese third generation women artists such as Kim Jung-sook, Kim Ae-soon, and Han Sung-nam, permanent residents in Japan who still have Korean nationality. The three Korean-Japanese third generation women artists whose art world is reviewed in this thesis would like to reveal their voices as minorities in Japan and Korea, resisting power and the universal concepts of nation, people and identity. Questioning the general notions of 'Korean women' and 'Korean women's art'considered within the Korean Peninsula, they explore their identity as Korean women outside the Korean territory from a post-territorial perspective and have a new understanding of the minority's diversity and difference through their eyes as marginal women living outside the mainstream of Korean and Japanese society. This is associated with recent post-colonial critical viewpoints reconsidering myths of universalism and transcendental aesthetic measures. In the 1980s and 1990s art museums and galleries in New York tried a critical shift in aesthetic discourse on contemporary art history, analyzed how power relationships among such elements as gender, sexuality, race, nationalism. Ghost of Ethnicity: Rethinking Art Discourses of the 1940s and 1980s by Lisa Bloom is an obvious presentation about the post-colonial discourse. Lisa Bloom rethinks the diversity of race, ethnicity, sexuality, and gender each artist and critic has, she began a new discussion on artists who were anti-establishment artists alienated by mainstream society. As migration rapidly increased through globalism lead by the United States the aspects of diaspora experience emerges as critical issues in interpreting contemporary culture. As a new concept of art with hybrid cultural backgrounds exists, each artist's cultural identity and specificity should be viewed and interpreted in a sociopolitical context. A criticism started considering the distinct characteristics of each individual's historical experience and cultural identity, and paying attention to experience of the third world artist, especially women artists, confronting the power of modernist discourses from a perspective of the white male subject. Considering recent international contemporary art, the Korean-Japanese third generation women artists who clarify their cultural identity as minority living in the border between Korea and Japan may present a new direction for contemporary Korean art. Their art world derives from their diaspora experience on colonial trauma historically. Their works made us to see that it is also associated with postcolonial critical perspective in the recent contemporary art stream. And it reminds us of rethinking the diversity of the minority living outside mainstream society. Thus, this should be considered as one of the features in the context of Korean women's art.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.90-95
• /
• 2008

In this study, a combined process of sequential anaerobic-aerobic digestion (SAAD), fluidized-bed bioreactor (FBBR), and ultrafiltration (UF) for the treatment of small scale food waste leachate was developed and evaluated. The SAAD process was tested for performance and stability by subjecting leachate from food waste to a two-phase anaerobic digestion. The main process used FBBR composed of aerators for oxygen supply and fluidization, three 5 ton reaction chambers containing an aerobic mesophilic microorganism immobilized in PE (polyethylene), and a sedimentation chamber. The HRTs (hydraulic retention time) of the combined SAAD-FBBR-UF process were 30, 7, and 1 day, and the operation temperature was set to the optimal one for microbial growth. The pilot process maintained its performance even when the CODcr of input leachate fluctuated largely. During the operation, average CODcr, TKN, TP, and salt of the effluent were 1,207mg/L, 100mg/L, 50 mg/L, and 0.01 %, which corresponded to the removal efficiencies of 99.4%, 98.6%, 89.6%, and 98.5%, respectively. These results show that the developed process is able to manage high concentration leachate from food waste and remove CODcr, TKN, TP, and salt effectively.

• Restorative Dentistry and Endodontics
• /
• v.35 no.3
• /
• pp.164-172
• /
• 2010

During a composite resin restoration, an anticipating contraction gap is usually tried to seal with low-viscosity resin after successive polishing, etching, rinsing and drying steps, which as a whole is called rebonding procedure. However, the gap might already have been filled with water or debris before applying the sealing resin. We hypothesized that microleakage would decrease if the rebonding agent was applied before the polishing step, i.e., immediately after curing composite resin. On the buccal and lingual surfaces of 35 extracted human molar teeth, class V cavities were prepared with the occlusal margin in enamel and the gingival margin in dentin. They were restored with a hybrid composite resin Z250 (3M ESPE, USA) using an adhesive AdperTM Single Bond 2 (3M ESPE). As rebonding agents, BisCover LV (Bisco, USA), ScotchBond Multi-Purpose adhesive (3M ESPE) and an experimental adhesive were applied on the restoration margins before polishing step or after successive polishing and etching steps. The infiltration depth of 2% methylene blue into the margin was measured using an optical stereomicroscope. The correlation between viscosity of rebonding agents and mciroleakage was also evaluated. There were no statistically significant differences in the microleakage within the rebonding procedures, within the rebonding agents, and within the margins. However, when the restorations were not rebonded, the microleakage at gingival margin was significantly higher than those groups rebonded with 3 agents (p < 0.05). The difference was not observed at the occlusal margin. No significant correlation was found between viscosity of rebonding agents and microleakage, except very weak correlation in case of rebonding after polishing and etching at gingival margin.