• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.107.6-107
• /
• 2001

Genetic alogorithm(GA) is a well-known global optimization algorithm. However, as the searching bounds grow wider., performance of local optimization deteriorates. In this paper, we propose a hybrid algorithm which integrates the gradient algorithm and GA so as to reinforce the performance of local optimization. We apply this algorithm to the system identification of second order RLC circuit. Identification results show that the proposed algorithm gets the better and robust performance to find the exact values of RLC elements.

• Journal of applied mathematics & informatics
• /
• 제12권1_2호
• /
• pp.199-209
• /
• 2003

When a sampling theorem holds in wavelet subspaces, sampling expansions can be a good approximation to projection expansions. Even when the sampling theorem does not hold, the scaling function series with the usual coefficients replaced by sampled function values may also be a good approximation to the projection. We refer to such series as hybrid sampling series. For this series, we shall investigate the local convergence and analyze Gibbs phenomenon.

• 한국작물학회지
• /
• 제26권3호
• /
• pp.251-256
• /
• 1981

수입에 의 한 수요충족이 절대불가능한 양질다수성 싸이레지용 옥수수의 개발은 우리나라에 매우 필요한 사항이다. 양질 다수성인 싸이레지용 옥수수의 개발을 위한 육종적 재료를 확보코저 재래종 옥수수의 수집종 가운데서 선발된 다약다수성인 계통을 가지고 재배환경이 다양한 조건하에서 싸이레지용으로서의 가부시험을 한 결과는 다음과 같이 요약된다. 1. 싸이레지용 주요특성의 하나인 단위면적당 총건물중 생산양에 있어서 파종기나 재배밀도에 관계없이 수원 19호 교잡종보다 다약다종성인 MET 계통이 평균 10% 더 높았다. 2. 식물체의 부입별 특성을 비교하면 MET 계통은 건엽중이 수원 19호보다 월등히 높아 MET 계통의 건물중 증가에 기여하였다. 3. MET 계통의 건엽중이 수원 19호보다 높았던 것은 MET계통의 분벽에 의한 엽수의 증가 때문이었으며, 4. 기타 곡실수량에 관련된 이삭의 무게라든가 입중, 이확속중 등은 수원 19호가 높았다. 다만 포엽중만은 MET 계통이 다수성으로 인해 더 높았다. 5. TDN의 증감과 관계가 있는 100a당 배의 생산은 소입성인 MET 계통이 수원 19호보다 10$\sim$15% 더 높았다. 6. MET 계통이 다약다수성이고 수원 19호가 무약일수성인데도 불구하고 분산분석결과 품종$\times$재배환경(파종기 또는 재식밀도)라는 유의적인 상호작용이 없이 다 같이 밀식함으로써 총건물중이 증가하였다. 7. 싸이레지로 만들었을 때 MET 계통과 수원 19호의 일반조성분 TDN 등을 비교한 결과 일반 조성분에 있어서는 두 품종간에 큰 차이가 없었으나 TDN에 있어서는 MET 계통이 더 높았고 DCP에 있어서는 수원 19호가 더 높았다. 8. 아미노산의 분석결과 두 품종간에 큰 차이는 없었다.

• 한국정보전자통신기술학회논문지
• /
• 제12권5호
• /
• pp.499-506
• /
• 2019

본 논문은 SiC Hybrid module를 적용한 7kW 인버터의 동작 안정성에 관한 것으로 손실 방정식과 시뮬레이션 결과를 비교하여 시뮬레이션 결과의 유효성을 검증하였으며, 시뮬레이션을 통해 Si module과 SiC Hybrid module의 스위치 손실과 다이오드 손실을 비교하였다. 손실 방정식 계산을 통하여 SiC Hybrid module의 도통 손실은 168W, 스위칭 손실은 9.3W, 다이오드 손실은 10.5nW의 결과를 나타내었으며, 시뮬레이션 결과와 비교하였을 때 유사한 값을 나타내었다. 이를 바탕으로 Si module과 SiC Hybrid module의 시뮬레이션 결과 값 비교 결과, Si module의 총 소자 손실값은 246.2W, SiC Hybrid module의 총 소자 손실 값은 189.9W를 나타내었으며, 손실 차이 값은 56.3W로써 약 0.8W의 효율 차이를 보였다. 이로 인하여 SiC SBD의 Reverse recovery 특성을 검증하였다. 또한 고온 포화상태에서 SiC Hybrid module 및 Si module의 안정성을 확인하기 위하여 온도 포화 테스트를 진행하였으며, Si module의 경우, 출력전력 4kW에서 동작을 멈추었고, SiC Hybrid module은 7kW까지 동작을 확인하였다. 이를 바탕으로, 효율 그래프와 온도 그래프를 제시하였으며, Si module은 4kW까지, SiC Hybrid module은 7kW까지 그래프로 나타내었다.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.59-67
• /
• 2015

PURPOSES : In this study, an image analysis method is used to evaluate the pore structure characteristics and permeability of hybrid concrete. METHODS : The binder weight of hybrid concrete is set to $400kg/m^3$, $370kg/m^3$, and $350kg/m^3$, and for each value of binder weight, the pore structure and permeability of concrete mixture is evaluated. The permeability of hybrid concrete is evaluated using a rapid chloride penetration test(RCPT). RESULTS : The concrete pore structure characteristics of hybrid concrete reveals that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. The permeability of the hybrid concrete for all values was measured to be below 1000 C, which indicates a "Very Low" level of permeability relative to the evaluation standard of KS F 2711. Additionally, as the binder weight is decreased, there is a significant increase in the permeability of chloride ions. CONCLUSIONS : In this study, the pore structure characteristics of hybrid concrete at different binder weights shows that as the binder weight is reduced, the entrained air is reduced and the entrapped air is increased. Consequently, chloride ion penetration resistance of the hybrid concrete is diminished. As a result, it is expected that this will reduce the concrete's durability.

• 한국해양생명과학회지
• /
• 제7권2호
• /
• pp.163-170
• /
• 2022

본 연구에서는 해상가두리 양식장에서 북방전복과 둥근전복속 교잡종(왕전복♀^*둥근전복♂)의 생물지표를 분석하여 교잡육종의 결과를 평가하고자 하였다. 생존율은 북방전복과 유사하였으나, 성장(각장)은 교잡종에서 약 10% 빠른 것으로 분석되었다. 패각의 호흡공 기형율은 교잡종이 북방전복보다 약 6% 낮았으며, 패각 함몰 및 부식율은 교잡종이 약 15% 낮았다. 생화학적 조성에서는 조단백질의 경우 교잡종에서 약 3.1% 높았으며, 이를 제외한 나머지에서 유사한 값을 나타냈다. 소화, 흡수 및 해독기능을 수행하는 간췌장의 조직학적 평가에서는 교잡종에서 좋은 결과를 보였다. 이러한 결과로 보아 둥근전복속 교잡종은 추후 양식 환경에 접목하였을 때 높은 양식 생산력을 가질 것으로 판단된다.

• Journal of Positioning, Navigation, and Timing
• /
• 제1권1호
• /
• pp.65-75
• /
• 2012

We carry out an error analysis of 24-hour global positioning system (GPS)-very long baseline interferometry (VLBI) (GV) hybrid observation data. In this paper, we focus on the impacts of broadcast and final orbits on the GPS delays of the GV hybrid observation by analyzing the residuals, observed - calculated (O-C) values. The residuals show apparent and consistent biases for L1 and L2 signals, respectively. The scatters of the residuals are around a few nanoseconds. The main cause of those observation errors is the absence of the GPS phase and delay calibration system. Most of the satellites show that the differences between the delays, to which broadcast and final orbits are applied, are about 100 times smaller than the current GV hybrid observation errors. We conclude that GPS delays are not greatly affected by orbit accuracies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.388-390
• /
• 2006

This paper presents a hybrid SoC design for phase detection of single tone signal. The designed hybrid SoC is composed of three functional blocks, i.e., an analog to digital converter module, a phase detection module and a controller module. A design of the controller module is based on a 16-bit RISC architecture. An I/O interface and an LCD control interface for transmission and display of phase measurement values are included in the design of the controller module. A design of the phase detector is based on a recursive sliding-DFT. The recursive architecture effectively reduces the gate numbers required in the implementation of the module. The ADC module includes a single-bit second-order sigma-delta modulator and a digital decimation filter. The decimation filter is designed to give 98dB of SNR for the ADC. The effective resolution of the ADC is enhanced to 98dB of SNR by the incorporation of a pre FIR filter, a 2-stage cascaded integrator- comb(CIC) filter and a 30-tab FIR filter in the decimation. The hybrid SoC is verified in FPGA and implemented in 0.35 CMOS Technology.

• 대한치과교정학회지
• /
• 제46권6호
• /
• pp.386-394
• /
• 2016

Objective: The objective of the study was to evaluate the practicality and the validity of different surface treatments of self-drilling orthodontic mini-implants (OMIs) by comparing bone cutting capacity and osseointegration. Methods: Self-drilling OMIs were surface-treated in three ways: Acid etched (Etched), resorbable blasting media (RBM), partially resorbabla balsting media (Hybrid). We compared the bone cutting capacity by measuring insertion depths into artificial bone (polyurethane foam). To compare osseointegration, OMIs were placed in the tibia of 25 rabbits and the removal torque value was measured at 1, 2, 4, and 8 weeks after placement. The specimens were analyzed by optical microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Results: The bone cutting capacity of the etched and hybrid group was lower than the machined (control) group, and was most inhibited in the RBM group (p < 0.05). At 4 weeks, the removal torque in the machined group was significantly decreased (p < 0.05), but was increased in the etched group (p < 0.05). In the hybrid group, the removal torque significantly increased at 2 weeks, and was the highest among all measured values at 8 weeks (p < 0.05). The infiltration of bone-like tissue surface was evaluated by SEM, and calcium and phosphorus were detected via EDS only in the hybrid group. Conclusions: Partial RBM surface treatment (hybrid type in this study) produced the most stable self-drilling OMIs, without a corresponding reduction in bone cutting capacity.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1899-1909
• /
• 2015

Glaucoma is one of the most common causes of blindness which is caused by increase of fluid pressure in the eye which damages the optic nerve and eventually causing vision loss. An automated technique to diagnose glaucoma disease can reduce the physicians’ effort in screening of Glaucoma in a person through the fundal retinal images. In this paper, optimal hyper analytic wavelet transform for Glaucoma detection technique from fundal retinal images is proposed. The optimal coefficients for transformation process are found out using the hybrid GSO-Cuckoo search algorithm. This technique consists of pre-processing module, optimal transformation module, feature extraction module and classification module. The implementation is carried out with MATLAB and the evaluation metrics employed are accuracy, sensitivity and specificity. Comparative analysis is carried out by comparing the hybrid GSO with the conventional GSO. The results reported in our paper show that the proposed technique has performed well and has achieved good evaluation metric values. Two 10- fold cross validated test runs are performed, yielding an average fitness of 91.13% and 96.2% accuracy with CGD-BPN (Conjugate Gradient Descent- Back Propagation Network) and Support Vector Machines (SVM) respectively. The techniques also gives high sensitivity and specificity values. The attained high evaluation metric values show the efficiency of detecting Glaucoma by the proposed technique.