• Journal of the Korea Society of Computer and Information
• /
• v.19 no.7
• /
• pp.59-70
• /
• 2014

This paper propose a new wireless multi-hop routing protocol that takes the hierarchical mesh of the hybrid WMN into account. WMN that is possible to provide various applications of wireless networks still has many open issues that should be solved despite the studies carried out over a decade. Especially, in routing protocol area, a problem degrading the routing efficiency by applying one of the routing protocols, which are designed for the MANET, to the hybrid WMN be solved above all. For the improvement of the routing performance, both good routing protocol and metric are essential. However, the recent studies are only concentrated in routing metric by use of the cross-layer design. Therefore, this paper is dedicated to the routing protocol that is essential for the performance of the routing but needed more studies. The proposed protocol in this paper is reactive, and designed to reorganize the hybrid WMN with several pseudo domains, and carry out domain-based route decision. By the simulation result for the performance analysis of the proposed protocol, the average delay for the route decision was decreased by 43% compared to AODV that is the typical reactive protocol.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.6
• /
• pp.480-488
• /
• 2014

Vortex shedding which is the dominant feature of body wakes and of direct relevance to practical engineering problems, has been intensively studied for flows past a circular cylinder. In contrast, vortex shedding from a hydrofoil trailing edge has been studied to much less extent despite numerous practical applications. The physics of the problem is still poorly understood. The present study deals with $K{\acute{a}}rm{\acute{a}}n$ vortex shedding from a truncated trailing-edge hydrofoil in relatively high Reynolds number flows. The objectives of this paper are twofold. First, we aim to simulate unsteady turbulent flows past a two dimensional hydrofoil through a hybrid particle-mesh method and penalization method. The vortex-in-cell (VIC) method offers a highly efficient particle-mesh algorithm that combines Lagrangian and Eulerian schemes, and the penalization method enables to enforce body boundary conditions by adding a penalty term to the momentum equation. The second purpose is to investigate shedding frequencies of vortices behind a NACA 0009 hydrofoil operating at a zero angle of attack.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.1 s.151
• /
• pp.8-15
• /
• 2007

In this paper, numerical calculations are performed to analyze the unsteady flow of NACA airfoil sections. In order to ease the flow computation for the fluid region changing in time, improve the quality of solution and simplify the grid generation for the oscillating foil flow, the computational method adopts a moving and deforming mesh with the multi-block grid topology. The multi-block, structured-unstructured hybrid grid is generated using the commercial meshing software Gridgen V15. The MDM (Moving & Deforming Mesh) and the UDF (User Define function) function of FLUENT 6 are adopted for computing turbulent flows of the foil in pitching motion. Computed unsteady lift and drag forces are compared with experimental data. in general, the characteristics of unsteady lift and drag of the experiments are reproduced well in the numerical analysis.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.13 no.1
• /
• pp.13-24
• /
• 1995

The color filter os made in four methods ; dyeing, printing electrodisposition and pigment dispersed method. Among technologies for color filter manufacture, pigment-dispersed and hybrid method are dominant over all others in commercial manufacture of large scale, fine resolution color filter for liquid crystal display. In this paper to investigate the possibility of the color filter manufacture for LCD by screen printing method, we synthesyzed PVA/sbQ screen emulation for high resolution, estimated image of printed fine pattern and manufactured color filter by screen printing. Results of the study are as follow and found the screen printing method os useful and valid from it. 1. Fine pattern is formed due to photocyclodomerization of -C=C- bond at 342nm, on the other hand unexposured parts are removed in water. 2. sharpness and resolution of fine pattern is improved at mesh streching angle 22.5 and 45 than 0 degree. It is expected due to resistance between inks and mesh streching angles. 3. Spectral characteristics of sample inks were R(640nm), G(535nm), B(470nm), transmittance were R(92%), G(79%), B(70%) and chromaticity coordinate values were R(0.62,0.33), G(0.32,0.59), B(0.14,0.17)

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.252-255
• /
• 2008

In this study, the characteristics of crossing a river of Ground Armored Vehicle (GAV) were evaluated by numerical method and real size tests. 3-D hybrid mesh systems were constructed by 3-D models of the GAV, and a commercial software, FLUENT, was used in numerical analysis. In order to deal with multi-phase problem (air and water), Volume Of Fluid (VOF) method was used, and Moving and Deforming Mesh (MDM) was adapted for unsteady motion of GAV. There were two steps in this research. Firstly, stability of the GAV which cruised a river was evaluated by changing several shapes of water-proof-front-wing of the GAV in steady state, and compared results (free surface shape and drag value in 10km/h) with those of real size tests. Secondly, results of unsteady analysis considering weight and moment of inertia of the GAV were presented. There were showed a maximum velocity with a designed water jet and dynamic stability including pitch, roll, and yaw moment. Based on these results, the optimal shape of water-proof-front-wing of the GAV was determined for a proto-type of the GAV.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.84-92
• /
• 2000

In this paper, numerical scattering analysis for submerged scatterers is performed using finite and infinite elements. Unbounded domain is truncated into finite domain and finite elements are used in the domain. Infinite elements, So called Infinite Wave Envelope Elements (IWEE) which possess wave-like behavior, are used to take into account the infinite domain on the truncated boundary Scattering from rigid sphere is taken as an example and the effects of the order and mesh size of finite elements, size of finite element model and the order of IWEE are investigated. Quadratic finite element, refined mesh and higher order IWEE are recommended to improve the non-reflection boundary condition in the numerical scattering analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.14-22
• /
• 2001

Off-line handwritten numeral recognition is a very difficult task and hard to achieve high recognition results using a single feature and a single classifier, since handwritten numerals contain many pattern variations which mostly depend upon individual writing styles. In this paper, we propose handwritten numeral recognition system using hybrid features and combined classifier. To improve recognition rate, we select mutually helpful features -directional features, crossing point feature and mesh features- and make throe new hybrid feature sets by using these features. These hybrid feature sets hold the local and global characteristics of input numeral images. And we implement combined classifier by combining three neural network classifiers to achieve high recognition rate, where fuzzy integral is used for multiple network fusion. In order to verify the performance of the proposed recognition system, experiments with the unconstrained handwritten numeral database of Concordia University, Canada were performed. As a result, our method has produced 97.85% of the recognition rate.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.771-778
• /
• 2008

A Device performance analyzing method for appropriate level in hybrid rendering model is suggested. In recent research, we proposed a hybrid rendering model which is applying a proper shading method to each of polygons consisting of an object. The number of polygon for Gouraud shading and that for flat shading should be considered according to a current device performance and system environments. Therefore, this paper suggests the method to calculate automatically a proper resolution of a mesh of object and a proper level of mixture between Gouraud and a flat shading, considering a current device performance and a preference of end-user. The rendering model is so simple that it can be an efficient replacement to reduce a real-time rendering time since it provides automatically multi-level of rendering resolution to an executing environments. Moreover, it can be adopted in real-time adaptive service for 3D graphic contents like a graphic game under various device environments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.14-18
• /
• 2015

In recent years, world is faced with a transportation energy dilemma, and the transportation is almost dependent on a single fuel - petroleum. However, Hybrid Electric Vehicle (HEV) technology holds more advantages to reduce the demand for petroleum in the transportation by efficiency improvements of petroleum consumption. Therefore, there is a trend that lower gear noise levels are demanded in HEV for drivers to avoid annoyance and fatigue during operation. And meshing transmission error (T.E.) is the excitation that leads to the tonal noise known as gear whine, and radiated gear whine is also the dominant source of noise in the whole gearbox. In this paper, the analysis of gear tooth profile and lead modification is firstly presented, and then, the different transmission error of no mesh misalignment and mesh misalignment under one loaded torque for the 1st gear pair of HEV gearbox was investigated and compared. At last, the appropriate tooth modification was used to minimize and compare the transmission error of the gear pair with mesh misalignment under the loaded torque.

• Journal of Korean Society on Water Environment
• /
• v.21 no.5
• /
• pp.458-463
• /
• 2005

Considering the characteristics of a filtration bio-reactor equipped with a mesh filter module which can effectively maintain high concentration of biomass and enhanced solid-liquid separation performance, the hybrid process of filtration bio-reactor combined with coagulation was investigated to get improved filtration characteristics as well as water quality in this work. Two bio-reactors (Run-1 & Run-2) were operated under the following conditions: working volume of 25 L, continuous loading of a synthetic wastewater (BOD: 200 mg/L, T-N: 50 mg/L, T-P: 5 mg/L), where an appropriate amount of alum ($Al_2(SO_4)_3{\cdot}18H_2O$) was added once a day into the reactor (Run-2). In the system without using a alum (Run-1), the clogging of mesh filter module was observed two times through 85 days of whole operation. Meanwhile, the filter module did not clog even at higher MLSS concentration (6,000~12,000 mg/L) and the stable filtration (0.7 mid) was continued in the case of using a alum. Due to the stable formation of cake layers, BOD and SS were shown below 6 and 3 mg/L, respectively. T-P and pH of the effluent were changed because of the intermittent addition of the alum. In the case of Al/P=2.5, the average T-P removal efficiency per day was 85.2% and the average T-P concentration of the effluent was 0.3 mg/L. However, the removal efficiency of phosphate was influenced by pH in the reactor.