• Journal of Forest and Environmental Science
• /
• v.28 no.1
• /
• pp.12-18
• /
• 2012

Like any other natural resources, forest flora may experience the extreme threat of elevated temperature and saline water submergence at different stages of their lives i.e. from germination to maturity due to climate change effects. The overall aim of the study was to measure the effect of higher temperatures along with saline water irrigation on survival and initial growth during seedling stage of Artocarpus chapalasha. The experiment was conducted in temperature- humidity-photoperiod regulated plant growth chamber during stipulated period to measure the growth performance of randomly selected seedlings. Within three different elevated temperatures viz. $30^{\circ}C$, $32^{\circ}C$ and $34^{\circ}C$, the seedlings were given three different saline conditions such as 0.5 g/L, 1.5 g/L and 2.5 g/L NaCl concentrations. Results found from the experiment was that, seedlings of Artocarpus chaplasha reared at different temperatures and saline water treatments showed stunted growth than reared at existing outdoor temperature ($26.31^{\circ}C$) irrigated with regular fresh water. Seedling growth at three different parameters such as height, collar diameter and number of leaves showed that with increasing temperature individuals respond negatively to increasing saline condition. The seedling's growth occurred at every day in height, collar diameter and leaf. However, growth rate reduced later during the observation. The combined effect of high salinity and higher elevated temperature results in seedling mortality. Therefore, Artocarpus chaplasha may not thrive at higher temperature and salinity intrusion at its early growing period in plantation and natural forest areas.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.2
• /
• pp.291-299
• /
• 1993

In this study, bedclimate was investigated depending on three bedquilts used on ondol in winter. The environmental room condition and the ondol surface temperature were maintained $20{\pm}1^{\circ}C$, $50{\pm}3%R$. H and $30{\pm}1^{\circ}C$, respectively. The materials of the experimental quilts were not different from each other. But the weights of cotton filler were 1.5, 3.0, and 4.5kg for the bedquilts. Two healthy young women were subjected for seven hour's sleep with two replications for this study. The results are as follows. 1) The range of temperature under the mattress was higher($38.5{\sim}43.2^{\circ}C$) than that of the temperature on the mattress($32.4{\sim}37.0^{\circ}C$) or that of the temperature inside the bedquilts($30.2{\sim}34.5^{\circ}C$). The humidity inside the bedquilts was 40~73%R.H. 2) The range of bedclimate which subjects feel comfortable were $33.6{\sim}37.1^{\circ}C$ on the mattress, $30.2{\sim}33.6^{\circ}C$, 42~67%R.H. inside the bedquilts. At this range, the mean skin temperature of the subjects was was $34.7{\sim}35.6^{\circ}C$. 3) When there was heating, the weight of mattress increased due to evaporation by heat from below, while wehght of other bedding increased. 4) The lower limbs are noted to be a good representative for the prediction of the skin temperature during sleep. 5) The thicker the bedquilt, the warmer and more humid the bedquilt, which induce frequent body movement during sleep, hence inferior comfort properties of bedquilts.

• Journal of the Korean association of regional geographers
• /
• v.21 no.3
• /
• pp.608-617
• /
• 2015

This paper synthetically analyzes micrometeorological data and geomorphological features of Doeksan-ri Eoreumgol(ice valley) Yeongdeok-gun in order to investigate occurrence characteristics of the ice valley and a mechanism for freezing in summer. This ice valley is located in the distal end of a talus and intensity of cooling and freezing in summer seems to be related to morphology and dimensions of talus. Cooling in the ice valley is generated by cold air flows that move down to the bottom of talus from high mountains through pores and voids, then debris in talus is supercooled by the cold air. For it forms a stable state in and around voids cold air is stagnating in the lower end of talus. This causes freezing in summer at outpour points. Furthermore humidity condition of external air and vaporization heat is a key factor when freezing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2436-2442
• /
• 2014

In this study, EEG, HRV, and Vibra image were compared and analyzed in the environmental test room due to variation of temperature. The condition of the environmental test room was in relative humidity 50[RH%], air current speed 0.02[m/s] and illuminance 1000[lux] with setting up different temperatures from $18[^{\circ}C]$ to $31[^{\circ}C]$. At temperature $25[^{\circ}C]$, relative $M{\alpha}$ wave, relative $M{\beta}$ wave, $\frac{SMR}{\theta}$, and SDNN were revitalized, and both sides ${\alpha}$ wave asymmetry index $A_2$, HRT, stress index, and fatigue degree were decreased. Therefore, it was found that temperature $25[^{\circ}C]$ effects to increase the Neuro-energy like amenity, productivity, and concentration.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.773-787
• /
• 2020

In the injection molding process, the controlling stability of products quality is a very important factor in terms of productivity. Even when the optimum process conditions for the desired product quality are applied, uncontrollable external factors such as ambient temperature and humidity cause inevitable changes in the state of the melt resin, mold temperature. etc. Therefore, it is very difficult to maintain prodcut quality. In this study, a system that learns the correlation between process variables and product weight through artificial neural networks and predicts process conditions for the target weight was established. Then, when a disturbance occurs in the injection molding process and fluctuations in the weight of the product occur, the stability control of the product quality was performed by ANN predicting a new process condition for the change of weight. In order to artificially generate disturbance in the injection molding process, controllable factors were selected and changed among factors not learned in the ANN model. Initially, injection molding was performed with a polypropylene having a melt flow index of 10 g/10min, and then the resin was replaced with a polypropylene having a melt floiw index of 33 g/10min to apply disturbance. As a result, when the disturbance occurred, the deviation of the weight was -0.57 g, resulting in an error of -1.37%. Using the control method proposed in the study, through a total of 11 control processes, 41.57 g with an error of 0.00% in the range of 0.5% deviation of the target weight was measured, and the weight was stably maintained with 0.15±0.07% error afterwards.

• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.21-21
• /
• 2014

A edible mushroom, Hypsizygus marmoreus is commercially cultivated in Northeast Asia. Japan's annual production is 110,000ton or more. Since 2002, cultivation is expanded in Korea. To investigate the morphological, cultural and microscopic characteristics of Hypsizygus marmoreus, 109 isolates were collected from Korea and other countries. Clamp connection, chlamydospore and arthrospore were present in all tested isolates of H. marmoreus except HYM-002 and HYM-004. Also pilealtrama, gilltrama, basidia, basidiospore and cystidia of fruiting body were no difference among the isolates in the present investigation. Morphological characteristics of fruiting body was that color of pileus was brown and white, irregular as marble, the average size 12~22mm and stipes was $46{\sim}91{\times}6{\sim}10mm$. Isolates HYM-031, HYM-047 and HYM-109 formed grayish-brown pileus with a faint pattern. Molecular analysis with RAPD and ITS rDNA sequence analysis were also performed to check the genetic relationships among H. marmoreus isolates. Based on the RAPD analysis using the URP-PCR, all isolates of H. marmoreus were clustered into large 3 groups but more than 90% showed high similarity. In addition, morphological and geographical differences have been classified as an independent cluster. The brown and white strains enclosed in same cluster. So genetically no significance difference was observed between these two strains. ITS gene sequences of 16 selected isolates which were 640 bp long, were aligned and compared. The similarity in ITS sequence was 94.8 to 99.1% among tested isolates and the H. marmoreus isolates in GeneBank. In conclusion the tested isolates were H. marmoreus. Morphological and molecular observations proved that all tested isolates were belonging to H. marmoreus. For the stable artificial cultivation, composition of optimum media, mature period and light condition were established. Optimal formula of artificial cultivation medium was Douglas sawdust: corn cob: soybean meal: wheat bran = 40:30:15:15. In addition, 7% rice bran and 3% yellow sucrose was the most effective composition for spawn's liquid medium. For the maturation of the isolates was favorable for growing for 20 to 30 days at $25^{\circ}C$ and the LED lights in mixture of white and blue was good for growth period. For effective growth, the temperature, humidity and aeration control in every step was important.

• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.182-187
• /
• 2008

The environmental significance of indoor air quality is gaining more attention. Especially, the contamination of indoor air by volatile organic chemicals (VOCs) has become a serious environmental concern. We investigated the VOCs emissions from some interior materials used in the conventional railway passenger cabin. The seat cover and the flooring of cabins were used as testing materials, and they were put in a clean environmental chamber. The temperature and relative humidity was kept at $25{\pm}1^{\circ}C$ and $50{\pm}5%$, respectively. It was found that these interior materials emitted significant amount of VOCs under constantly ventilated condition. The flooring emitted more halogenated VOCs than the seat cover, because it is made of PVC, which contains many chlorine atoms. However, the emission gradually decreased over time. Because the VOCs emission from interior materials may threaten the health of passengers in the cabin, interior materials emitting less VOCs should be used.

• Journal of Environmental Science International
• /
• v.16 no.9
• /
• pp.1011-1018
• /
• 2007

This study was conducted to analysis the ecological characteristics of "Wando HolIy"$(llex{\times}wandoensis)$ which is expecting as a possible ornamental tree with its beautiful leaves, flowers and fruits, and to find special breeding material which have particular characteristics and also provide correct environmental information which are required for commercial cultivation. The hill of Galmoon-Ri, Gunoei-Myon, Jeonnam Province, Korea, were reported as a original habitat of native $llex{\times}wandoensis$. The investigation shows that soil pH of native habitat was 6.18, hardness was 2.39, humidity was 38.6%, direction of slope is SSW, and average inclination was $15^{\circ}. The vegetation around $I.{\times}wandoensis$ is occupied by trees like an Quercus variabilis, Q. serrata, Q. acuta and so on. These are mixed forest of deciduous trees. Tree height reached up to about 12m and its coverage is about 30%. Q. salicina, Camellia japonica, I. integra, Cryptomeria japonica account for sub-tree layer. Tree height is around 8m and coverage is about 20%. Shrub layer was taken by Viburnum furcatum, Callicarpa japonica, Styrax japonica, Eurya japonica, Lindera obtusiloba, Ligustrum japonicum, Smilax china, Cornus walteri etc. Tree height reaches around l.2m and coverage is around 20%. Herb layer includes Trachelospermum asiaticum var. intermedium, Cymbidium goeringii, Dryopteris bissetiana, Disporum viridescens, Disporum smilacinum, Sasa borealis var. gracilis etc. Trachelospermum asiaticum var. intermedium, which are observed in southern evergreen zone, are dominant and its coverage is around 20%. The native habitat was in spoiled condition because of artificial thin out.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.6
• /
• pp.1085-1092
• /
• 2009

The ozone data is one of the important environmental data for measurement of the atmospheric condition of the country. In this article, the Autoregressive Error (ARE) model and Neural Networks (NN) model have been considered for analyzing the ozone data at the northern part of the Gyeonggi-Do, Paju monitoring site in Korea. In the both ARE model and NN model, seven meteorological variables and four pollution variables are used as the explanatory variables for the ozone data set. The seven meteorological variables are daily maximum temperature, wind speed, relative humidity, rainfall, dew point temperature, steam pressure, and amount of cloud. The four air pollution explanatory variables are Sulfur dioxide ($SO_2$), Nitrogen dioxide ($NO_2$), Cobalt (CO), and Promethium 10 (PM10). The result showed that the NN model is generally better suited for describing the ozone concentration than the ARE model. However, the ARE model will be expected also good when we add the explanatory variables in the model.

• Journal of Environmental Health Sciences
• /
• v.32 no.1 s.88
• /
• pp.36-45
• /
• 2006

The aim of this study is to examine size-based concentration and genera of airborne fungi distributed in public facilities such as hospital, kindergarten, day-care center and postpartum nurse center and to provide fundamental data in order to prevent respiratory diseases caused by exposure to airborne fungi. Culturable total and respirable concentrations of airborne fungi averaged to $382\;cfu/m^3\;and\;292\;cfu/m^3$ in hospital, $536\;cfu/m^3\;and\;347\;cfu/m^3$ in kindergarten, $334\;cfu/m^3\;and\;266\;cfu/m^3$ in day-care center, and $371\;cfu/m^3\;and\;289\;cfu/m^3$ in postpartum nurse center, respectively. The ratio of respirable to total concentration of airborne fungi in the investigated public facilities was ranged from $55\%\;to\;70\%$ but there was no significant difference among them (p>0.05). The mean I/O ratio of culturable total and respirable concentrations were 0.56 and 0.64 in hospital, 0.72 and 0.91 in kindergarten, 0.33 and 0.45 in day-care center, and 0.63 and 0.73 in postpartum nurse center, respectively. Indoor concentration of airborne fungi did not correlated significantly with indoor temperature and relative humidity (p>0.05) but had a significant positive correlation with $CO_2$ concentration (p<0.01) and surrounding condition (p<0.05). Penicillium spp., Cladosporium spp., and Aspergillus spp. were estimated to over $95\%$ of total airborne fungi identified in the investigated public facilities.