• 한국의류산업학회지
• /
• 제17권6호
• /
• pp.1013-1019
• /
• 2015

As the interest in leisure and health increases, the domestic outdoor wear industry becomes bigger. The waterproofness of fabrics does not ensure the waterproofness of garments because of the stitch holes during the sewing process even with the seam sealing tapes. Thus the water leakage often becomes a problem during the end use. Still companies use fabrics waterproofness data for garments marketing because they are simple to run the test, less expensive than the whole garment testing, and easy to achieve the quality control. In this study the rain tower system for evaluating the waterproofness of garments has been developed and the waterproofness of the selected waterproof and breathable garments in the market were tested. The rain tower was consisted of rain tower room, rainfall forming system and measurement system. Two different levels of rainfall can be simulated with this system(100l/m²/hr and 450l/m²/hr). Jackets in the market have been tested at two different rainfall conditions. The temperature and humidity data inside jackets didn't provide much information on the waterproofness at severe rainfall condition(450l/m²/hr, 1 hour). However, water leakage was detected on the cotton undershirt inside jacket. 5 out of 8 jackets passed the normal rainfall condition(100l/m²/hr, 30 minutes). The newly developed rain tower system was able to evaluate the waterproofness of the jacket seams. It is recommended the further study on the detailed test conditions for the end use of the waterproof and breathable garments.

• 한국자원식물학회지
• /
• 제30권6호
• /
• pp.699-706
• /
• 2017

For rapid production of freesia 'Shiny Gold' shoots by using a bioreactor, several culture conditions were investigated. Young shoots (< 1 cm) obtained from freesia corm section in vitro were used as plant materials for this experiment. As a basic experimental environment, 20 young shoots were inoculated into a 5 L balloon type bubble reactor which contained 1 L 1/2 strength MS medium supplemented with 30 g sucrose (3%), and the aeration was 0.1 vvm (vessel volumes per minute). The bioreactors were placed in a growth room with $23^{\circ}C$ temperature, 60% relative humidity and $60{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light condition (16 h/8 h, day/night). The concentrations of MS media were set with 1/4, 1/2, 1 strength, medium volume 10, 20, 40%, sucrose concentration 3, 6, 9%, and aeration 0.1, 0.2, 0.4 vvm. After 4 weeks of cultivation, the growth indexes including the fresh and dry weight, and plant height were evaluated. At the same time, the consumption, pH, and EC of medium were estimated 4 weeks after incubating. The best results were achieved when 40 young shoots were incubated in a bioreactor in which 1 L of 1/2 strength MS medium supplemented with 6% sucrose was used for the rapid production of freesia shoots. The shoots were 17 cm in plant height and 1.0 g in fresh weight only 4 weeks after incubation which could be a good plant material suitable for corm enlargement in vitro. No correlation was observed between the growth of freesia shoots and the consumption, pH or EC of medium.

• 원예과학기술지
• /
• 제31권4호
• /
• pp.400-406
• /
• 2013

This study was conducted to investigate the growth and flowering of African marigold (Tagetes erecta L.) and salvia (Salvia splendens F. Sello ex Ruem & Schult.) seedlings before and after storage under fluorescent lamps and green LED radiation conditions with different light intensities during storage. The both seedlings were kept under a storage room controlled at $8^{\circ}C$ air temperature and $40{\pm}10%$ relative humidity conditions. Light intensities were maintained at 15 and $30{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ during storage. In lighting treatments, dry weight of African marigold at 28 days after storage was not significantly different, and decreased approximately 29% compared to pre-storage under dark treatment. There was no significant difference in the leaf area of salvia seedlings stored under dark condition compared to before storage, but the leaf area under green light radiation with higher light intensity (treatment GH) was two times greater than before storage. The survival rate after transplanting of African marigold stored under dark condition was 10%, and days to flowering increased compared to those stored under fluorescent and green light with higher light intensity (treatment FLH, GH). Comparing to before storage, growth and flowering of the both seedlings after storage were significantly promoted by the light exposure during storage. The present experimental results show that the light intensity should be decided to maintain minimum growth during lighting storage and storage quality of the seedlings such as flowering promotion and extended blooming period after lighting treatment during storage period from the above results.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.270-275
• /
• 2019

마이카 커패시터는 세라믹 커패시터에 비해 내고충격 특성이 우수하여 다양한 유도무기체계의 고전압 기폭장치에 적용된다. 본 연구에서는 국산화된 마이카 고전압 커패시터의 고전압 기폭장치 적용을 위해 단자강도시험, 내습성시험, 열충격시험과 같은 환경시험과 함께 가속 수명 시험을 진행하였다. 마이카 고전압 커패시터의 고장모드는 절연저항 감소 및 이를 통한 절연 파괴이다. 가속수명모델의 중요 상수를 실험적으로 도출하였으며 전압계수 n 및 활성화 에너지 E_a는 각각 5.28 및 0.805 eV이었다. 가속모델식을 이용하여 도출한 가속계수는 496이었으며 가속수명시험을 통해 도출된 정상 사용 조건에서의 마이카 고전압 커패시터의 수명은 38.5년으로 기폭장치 적용에 문제가 없는 것으로 확인되었다.

• 한국지열·수열에너지학회논문집
• /
• 제2권1호
• /
• pp.1-7
• /
• 2006

This paper was studied for optimum design of the used vaporizer at a satellite station. Generally, the cold air is created by temperature drop on the vaporizer surface. In addition, the frost creates ice deposit layer, therefore, heat transfer on vaporizer decreases into the adiabatic condition. By this reason, recent vaporizer system is installed as parallel type, and it takes three times of vaporizer capacity. But this vaporizer system requires much installation costs and restricted by some space. It is very important to solve this problem. This study paper is regarding $LN_2$ vaporizer where the utilization increases recently. There are three variable conditions which are used in this study research. First, fin lengths of 4000mm, 6000mm, 8000mm and 0, 4, 8 fin types were applied rut each vaporizer. Second, we applied four season condition which consist of humidity, temperature and air velocity to the experimental environment. Finally, pressure was applied to get flow rate during experiment. This paper objective is to propose vaporizer type and length data for best performance of vaporizer through experiment.

• 한국농촌생활과학회지
• /
• 제5권1호
• /
• pp.1-8
• /
• 1994

온랭 열 자극에 대하여 인체의 말초 혈류량과 심박수가 어떻게 반응하는가를 관찰하기 위하여 건강한 성인 여자 4명을 피험자로 실험군과 비교군으로 나누어 실험을 실시하였다. 실험군은 온랭열 자극의 단기 훈련을 12회 실시하고 비교군은 실험군의 초기와 말기 2회 실시하여 얻은 결과를 비교ㆍ검토하여 다음과 같은 결과를 얻었다. $\circled1$ 실험군에서의 손가락 혈류량의 초기 반응은 훈련 후에 민감해졌다. $\circled2$ 심박수는 냉수 노출시보다 온수 노출시 증가하였다. $\circled3$ 실험군과 비교군간에는 혈류량의 변화 형태와 심박수에 차이가 있었다. 이상에서 E-군과 C-군의 혈류량과 심박수에서 차이를 나타낸 것은 단기 훈련 효과에 의한 것으로 추정된다.

• Mycobiology
• /
• 제35권4호
• /
• pp.226-229
• /
• 2007

To produce fruiting bodies of Oudemansiella mucida, porcelain fungus, on the oak sawdust medium, additives suitable for the mycelial growth and fruiting body formation were screened. In general, the mycelial growth of the three strains of O. mucida used in this study have been good on oak sawdust mixed rice bran of $20{\sim}30%$. The mycelia incubated in potato dextrose broth for 7 days were inoculated on oak sawdust medium supplemented with various ratios of rice bran and incubated for 30 days at $25^{\circ}C$ in the dark condition until the mycelia of O. mucida fully colonized the media from top to bottom. Then, top surface of the media in the bottles were horizontally scratched with a spatula and filled with tap water for 3 hours. To induce the primordial formation of O. mucida, the bottles were transferred to the mushroom cultivating room under 12 hrs of light (350 lux) and dark condition with relative humidity of 95% at $17^{\circ}C$. The primordia of O. mucida were formed on the surface of oak sawdust media after 7 days of incubation. The mature fruiting bodies were observed 5 days after primordial formation. The fruiting bodies O. mucida were formed on oak sawdust medium mixed with 5 to 30% rice bran. However, abundant fruiting-bodies of O. mucida were produced in oak sawdust medium supplemented with 20% rice bran. This is the first report associated with an artificial fruiting body production of O. mucida in Korea.

• Journal of Pharmaceutical Investigation
• /
• 제22권1호
• /
• pp.41-48
• /
• 1992

Six common tablet disintegrants (corn starch, Avicel PH102, calcium carboxymethylcellulose, Primojel, Kollidon CL and Ac-Di-Sol) were used at the concentration of 0, 2, 4 and 6% (w/w) in salicylamide tablets made with wet granulation method. Certain physical parameters of the disintegrants (moisture sorption, hydration capacity and bulk density) were determined to evaluate their relative efficiency. The disintegration time and dissolution rate of the tablets were correlated well with the ranks of initial rate of moisture sorption for each disintegrant as follows; Ac-Di-Sol, Kollidon CL, primojel, calcium CMC, corn starch and Avicel PH102. The initial rate of moisture sorption was important for the disintegration capacity as well as hydration capacity. The effect of storage at different temperatures and relative humidity upon the tablets containing various disintegrants was evaluated in terms of tablet hardness and disintegration time. Storage at high temperature reduced the hardness substantially and retarded the disintegration of the all tablets studied. Especially, the hardness of tablets containing Kollidon CL was significantly reduced. Although the tablet hardness was decreased and the disintegration time was increased under a moderate humid condition, both of them were decreased under the severely high humid condition of 80 or 90% RH, which was due to the breakrupture of tablet matrix bonds by the excessive uptake of moisture. Therefore, the stability caused by moisture sorption should be considered, when disintegrants having high moisture sorption such as Kollidon CL, Ac-Di-Sol and Primojel were employed in the tablets containing water-labile or hygroscopic drugs.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.104-104
• /
• 2011

The fuel economy estimates essentially serve two purposes : to provide consumers with a basis on which to compare the fuel economy of different vehicles, and to provide consumers with a reasonable estimate of the range of fuel economy they can expect to achieve. The current fuel economy label values utilize measured fuel economy over city driving cycles. However, this test driving mode can not be evaluated the variety factor of the real-world. These factors include differences between the way vehicles are driven on the road and over the test cycles, air conditioning use, widely varying ambient temperature and humidity, widely varying trip lengths, wind, precipitation, rough road conditions, hills, etc. The purpose of this paper is to account for three of these factors on the fuel economy : 1) on-road driving patterns (i.e. higher speeds and more aggressive driving (higher acceleration rates)), 2) air conditioning, and 3) colder temperatures. The new test methods will bring into the fuel economy estimates the test results from the five emissions tests in place today : CVS-75, HWFET, US06, SC03 and Cold CVS-75. Based on these new test methods, this paper discusses the characteristics of driving condition on Hybrid electric vehicle (HEV). And this paper assesses the fuel economy label of HEV.

• Mycobiology
• /
• 제34권4호
• /
• pp.206-208
• /
• 2006

To produce an artificial fruiting body of Armillaria mellea on the oak sawdust medium, seven strains of A. mellea were used. The top surface of oak sawdust medium covered with ground raw carrot was inoculated with each of 7 strains and cultured for 30 days at $25^{\circ}C$ in the dark condition until the mycelia of A. mellea completely colonized the medium from top to bottom. Then, the mycelia which were fully covered on the top surface of the medium were scratched slightly with a spatula and filled with tap water for 3 hours. To induce the primordial formation, the 7 strains of A. mellea were transferred to the growth chamber under the illumination (350 lux) of 12 hours and relative humidity of $85{\pm}5%$ in a day and then cultured at $16{\pm}1^{\circ}C$. Only A. mellea IUM 949 could form primordia on the sawdust medium, but the other strains did not make primordia at the same condition. The primordia of A. mellea IUM 949 were formed 10 days after complete colonization of the medium and the fruiting bodies were produced 7 days after a primordial formation. The experimental results suggested that IUM 949 strain might be a good candidate for mass production of fruiting bodies of A. mellea.