• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.6
• /
• pp.616-625
• /
• 2017

Measurements using five real-time particle samplers were compared to measurements using three NRM (National Reference Method system) filter-based samplers(Gravimetric method) at Incheon, Korea, between May and August, 2014. The purpose of this study was to suggest the quality assurance/quality control (QA/QC) method of each instrument for use in a real-time continuous particle sampler to measure the mass of airborne particles with an aerodynamic diameter less than $2.5{\mu}m$ ($PM_{2.5}$). Five real-time particle samplers of BAM1020, FH62C_14, TEOM, PM-711 and SPM-613 were evaluated by comparing its measured 23 hr average $PM_{2.5}$ concentrations with those measured with NRM filter-based samplers simultaneously. The parameters(e.g. Inlet heating condition, Slope factor, Film response, Intercept, Background, Span value) of the real-time samplers were optimized respectively by conducting test performance evaluation during 7 days in field sampling. For example, inlet heating temperature of TEOM sampler controls $35{\sim}40^{\circ}C$ to minimize the fluctuation of the real-time measurement data and background value of BAM1020 is the key factor affecting the accuracy of $PM_{2.5}$ mass concentration. We classified the $PM_{2.5}$ concentration according to relative humidity (80%) to identify water absorbed in aerosols by measuring the ${\beta}$-ray samplers(BAM1020, FH62C_14) and TEOM. ${\beta}$-ray samplers were not strongly affected by relative humidity that the difference of the average $PM_{2.5}$ concentration was about 5%. On the other hand, The TEOM sampler overestimated $PM_{2.5}$ mass concentration about 15% at low relative humidity (<80%).

• Journal of Plant Biotechnology
• /
• v.31 no.2
• /
• pp.133-138
• /
• 2004

Growth of M.9 (Malus domestica Bark. cv) and M.26 (Malus domestica Bark. cv) of dwarf apple rootstock, cultured on MS agar medium in a vessel with ventilating stopper (VS) and then in vivo rooting and acclimatization under combined-treatment by some materials with IBA, were investigated. Concentration of $CO_2$ and ethylene in the vessel with VS was lower then in the vessel with non-VS. Change of temperature and humidity in the vessel with VS was repeated by light condition. Stomatal pares of tissue in the vessel with VS were immediately closed after plantlets were exposed to room humidity but those in the vessel with non-VS were opened after 20 minutes exposure to room humidity. Leaf area and chloroplast index of tissue in the vessel with VS was higher then in the vessel with non-VS. In vivo rooting ratio and acclimatization ratio of M.9 and M.26 was highest in 300mg/L IBA＋3％ sucrose dip-treatment among other combined- treatments.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.582-590
• /
• 2004

The purpose of this study was to evaluate thermal properties of Taekwondo wears with three different materials. As a begging step, the questionnaire survey about the actual condition of Taekwondo wears was conducted. With the results of the questionnaire, cotton/nylon(70/30) blended fabric(CN) that was newly woven with sweat absorbent finishing and cotton/spandex(95/5) blended fabric with flexibility property were developed. The same designed 3 Taekwondo wears with 3 different materials which were two different materials(CN and CS) and a current material(cotton/PET, CP) were made. Four young males volunteered for this study, they kicked and punched as Taekwondo action for 20 minutes. Mean skin temperature was the highest in CS(33.1${\pm}$0.8$^{\circ}C$) and the lowest in CP(32.7${\pm}$0.6$^{\circ}C$). Increasing degree of rectal temperature didn't show any significant difference. Clothing microclimate temperature on the thigh was higher in CS(32.8${\pm}$17.4$^{\circ}C$) than in CN(29.4${\pm}$1.1$^{\circ}C$) and CP(29.4${\pm}$1.0$^{\circ}C$). Clothing microclimate temperature on the back and humidity on the thigh didn't show any significant differences. Clothing microclimate humidity on the back was higher in CP(65${\pm}$20%RH) than in CS(61${\pm}$17％RH). Heart rate, total body weight loss, and local sweating were not significantly different by materials. Most subject responded more hot in CN than in others, but there were no significant differences at the subjective sensation of thermal humidity. They answered more comfortable in CN than in others. Tectile sensations were the best in CN and the worst in CS. From those results, first of all, it is necessary to be weighted on Taekwondo wears made of CN in the aspects of the dignity of military arts uniform. Secondly, CS was required to be lighted and enhanced for the subjective sensation. Third, CP weaved honey comb was asked more various design to eliminate sweat high competition power within the scope of the dignity of military arts uniform.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.1
• /
• pp.69-77
• /
• 2014

Unsaturated hydraulic conductivity of the bentonite-buffer was evaluated using the relative humidity data. The method for calculating unsaturated hydraulic conductivity was deduced from the general analytical equation representing the movement of water in unsaturated media, which was applied to the experimental results of water infiltration tests for identifying the behavior of unsaturated hydraulic conductivity according to the water saturation. Unlike the saturated condition, the hydraulic gradient and water flux were irregularly changed, and the unsaturated hydraulic conductivity was increased with increasing the experimental time. Swelling of bentonite grains due to the water absorption increased the volume and size of pore within bentonite, resulting in the increase of water velocity and unsaturated hydraulic conductivity. This result suggested the necessity of further investigation on the correlation between the swelling degree of bentonite-buffer and unsaturated hydraulic conductivity. The method used in this study can be useful technique for evaluating long-term hydraulic performance of bentonite-buffer in the radioactive waste disposal system.

• Applied Biological Chemistry
• /
• v.21 no.3
• /
• pp.144-149
• /
• 1978

Fermented soy sauce was dehydrated by spray drying to form powder, and moisture sorption properties of powdered soy sauce with or without cover of the flexible films were examined on different relative humidity by using saturated salt solutions at $30^{\circ}$. The results obtained were summarized as follows: The equilibrium moisture content of spray-dried soy sauce containing 18.3% moisture was determined to 52% by graphical interpolation method, and E.M.C. of powdered soy sauce covered with plastic films decreased at low relative humidity whereas sharply increased curves were seen at high relative humidity. The rate constant of moisture adsortion K for the power covered with films were $66.2{\times}10^{-5}\;to\;225{\times}10^{-5}/hr$., and K' became greater when film having higher water vapor transmission rate was used. The shelf-life of powdered soy sauce covered with Al. foil/P.E. film by Brown formula at the accelerated condition of $38^{\circ}$, 92% R. H. was the longest period, 164 days compared with any other films used, and the shortest period, 18 days in P.V.C. film.

• Journal of Korean Society of Forest Science
• /
• v.6 no.1
• /
• pp.19-23
• /
• 1967

The fungus which belongs to Alternaria has been isolated from "damping-off" infected seedlings of pitch pine (Pinus rigida Mill.) in the nursery (seed bed) of Chung Puk College, Cheong-Ju. The author has carried out this study regarding to (1) the effects of H-ion concentration on the growth of fungus, (2) the effects of temperature and humidity on the conidia germination, (3) the effects of temperature and humidity on the conidia formation. The summary of obtained in this experiments is as follows: 1. The suitable H-ion concentration for growth of isolated fungus is in the range of PH 4.0-9.5, the most suitable of it is PH 6.5-8.0. 2. The germination of the conidia is suppressed at below $0^{\circ}C$ or at $40^{\circ}C$ and above, the range of optimum temperature for the germination is $5^{\circ}C-35^{\circ}C$, the percentage of germination is highest at $20^{\circ}C$. And under relative humidities of 10% or below, the germination is suppressed, favorable relative humidities $85%{\cdots}100%$. 3. The formation of the conidia is suppressed at below $10^{\circ}C$ or at $34^{\circ}C$ and above, the favorable condition of the condia formation is as follows; Temperature; $22^{\circ}C-28^{\circ}C$ Relative humidity:85%-100%.

• Applied Chemistry for Engineering
• /
• v.33 no.3
• /
• pp.296-301
• /
• 2022

Due to the fact that zirconium based metal-organic frameworks (Zr-MOFs), such as UiO-66, have a large specific surface area and excellent selective adsorption capacity, Zr-MOFs are gaining attention as materials that can provide protection from the attack of chemical warfare agents in battleground. However, most of the metal-organic frameworks have an issue of selective adsorption capacity degraded by water molecules when exposed to the atmosphere, because of the weak metal-organic ligand bonds and the presence of voids. Therefore, polydimethylsiloxane (PDMS), a representative hydrophobic polymer material, was coated on the surface of UiO-66 to enhance the sustainability of the diisopropyl methylphosphonate (DIMP) sorption capacity in the battleground condition. Through the analysis of surface structure and organic functional group distribution of PDMS coated UiO-66, silicon was confirmed to be evenly coated. The contact angle increased by over 30° for the PDMS coated UiO-66, indicating that the hydrophobicity was improved. In addition, both the UiO-66 and PDMS coated UiO-66 were used as adsorbents for DIMP, a similar chemical warfare agent, to investigate the durability of adsorption capacity in a high humidity environment. The PDMS coated UiO-66 showed higher durability of adsorption capacity for 20 days than that of pristine UiO-66.

• Korean Journal of Veterinary Research
• /
• v.40 no.3
• /
• pp.611-625
• /
• 2000

For the improvement of quality control of laboratory mouse, we investigated the environmental condition, histopathological findings and serological test using ELISA to mouse hepatitis virus(MHV), Mycoplasma pulmonis(MP), Clostridium piliforme(TZ) and Sendai virus (HVJ) of ICR, C57BL/6, CBA and C3H/He mice that were supplied from conventional laboratory animal facility. 1. The ammonia concentration of facility was below the recommended concentration, 15ppm, by the KNIH, and the room temperature($21{\sim}23^{\circ}C$) and relative humidity(40~60%) was optimum range recommend by the Ministry of Health and Welfare, respectively. 2. The incidence rate of inapparent disease was 86.6% and the major findings in the liver were vacuolar degeneration with nucleic pleomorphism. The lung was shown the thickening of alveolar wall and interstitial pneumonia with congestion. The kidney and spleen were observed the mild congestion and extramedullary hematopoiesis, respectively. 3. The positive reaction rates against MHV and MP in serological test was 97.9% and 37.5%, respectively but HVJ and TZ were negative. These results suggest that laboratory mice could be infected with MHV and MP under conventional environments. Therefore we recommend to select thoroughly inapparent infected mice and to convert conventional system into SPF facility as soon as possible.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.130-137
• /
• 1994

This experiment was conducted to evaluate the reasonable rearing technique of Japanese oak silkworm under the different rearing condition as environment, feeding materials and rearing methods. The results are summerized as follows. The optimum temperature for the indoor rearing of Japanese oak silkworm was 25~26$^{\circ}C$ a in young silkworm and 22~23$^{\circ}C$ in grown silkworm, and generally in the condition of variable day/night temperature the growth of silkworm was faster than in that of constant temperature. The optimum relative humidity for it's growth was 80~90% at young silkworm stage and 60~70% at grown silkworm stage. The photoperiod was not affected to the growth of Japanese oak silkworm. The earlier brushing, the shorter the young silkworm stage, and the cocoon quality improved compared to the later brushing time. As a feeding materials aok (Auercus acutissima Crruthers) leaves were better than those of chestnut tree (Castanea Crenata Siebold & Zuccarini) and feeding value of cultivated oak tree leaves was better than that of natural oak tree leaves. The moving time when revealed the better cocoon production of Japanese oak silkworm from indoor condition to outdoor was 15 days after hatched, and the cocoon production was decreased by the earlier moving to outdoor.

• Korean Institute of Interior Design Journal
• /
• no.12
• /
• pp.67-77
• /
• 1997

Preservation space is a functionally$\ulcorner$core$\lrcorner$in a museum. Gernerally, it is a common view that collections are exhibited within 5% of total stored collections. So that, part of collections are cycled exhibition space centering around preservation space, and that is a important mechanism of collections circulation in a museum. It is the best way that collections should be $\ulcorner$conserve$\lrcorner$ in a stable condition, but inevitably collections are exposed as stable condition, but inevitably collections are exposed as called $\ulcorner$exhibition$\lrcorner$. For that reason the function of $\ulcorner$exhibition$\lrcorner$. For that reason the function of $\ulcorner$exhibition$\lrcorner$for 'showing' and the function of $\ulcorner$preservation$\lrcorner$for 'conserve'are contrary to each other's concept, so it is principle of scheme that these concepts should be functionally connected with and planned$\ulcorner$match$\lrcorner$. In addition, various studies (for example, comparative analysis of collections, examination of collections for conserved condition or special exhibition, and classification of new item, etc.) are worked in preservation space. Therefore, preservation space should not be considered as a warehouse, should be composed not only$\ulcorner$comfortable place to rest of collections$\lrcorner$but also $\ulcorner$part of study room$\lrcorner$in a museum. So that, environment of museum should be established by plan to preservation and management. The point of plan to museum is that minimize dangerous element for collections, and then develop an essencial element of space for$\ulcorner$conservation$\lrcorner$and$\ulcorner$exhibition$\lrcorner$. The reason why with a few exceptions (buildings which have being exposed or extremely minor part of collections) most of collections have been lasting its life during over hundreds of years with adapting itself to natural features, so scheme of preservation facilities should be made up with understanding and analysis generic character of collections, and then establish proper temperature and humidity environment.