• 제목/요약/키워드: humidification

검색결과 140건 처리시간 0.025초

겨울철 가습 및 환기에 따른 교실내 쾌적환경 분석 (Analysis of Comfortable Environment in the Classroom with Humidification and Ventilation in Winter)

  • 성내리;정성일;이재근;박종훈
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.1213-1219
    • /
    • 2008
  • This experimental study was to analyze thermal comfort and indoor air quality(IAQ) with ventilation and humidification in the classroom when system air conditioner was operated. The thermal comfort was estimated by the PMV index and the concentration of $CO_2$ and total suspended particle(TSP) were measured and compared with ventilation and humidification. As a result, the class room temperature distribution was $2{\sim}5^{\circ}C$ low during operating ventilation system and humidification. At 60% RH, PMV values of measuring points were ranged from +0.5 to -0.5 indicating optimal the range of thermal comfort. The average concentration of $CO_2$ gas and TSP were reduced 645 ppm, 0.17 mg/$m^3$ respectively, during operating the ventilation system. From the results, to maintain comfortable environment in the heated classroom, the ventilation and humidification were needed in winter season.

  • PDF

공조기 운전 조건이 가습 소자의 성능에 미치는 영향에 대한 실험 연구 (An Experimental Study for the Effect of Operating Condition of the Air Handling Unit on the Performance of Humidifying Elements)

  • 김내현
    • 한국산학기술학회논문지
    • /
    • 제19권11호
    • /
    • pp.326-331
    • /
    • 2018
  • 최근 들어 건물이나 데이터 센터의 공조에 기화식 가습기가 널리 사용된다. 일반적으로 가습 효율은 외기 조건에 관계없이 동일하게 적용된다. 하지만 이 부분에 대해서는 확인이 필요하다. 본 연구에서는 일반 건물과 데이터 센터의 설계 온습도 조건에서 일련의 실험을 수행하고 상기 가정이 적절한지를 판단하였다. 실험에 사용된 소자는 cellulose/PET 재질로 깊이 100mm, 200 mm, 300 mm 세 종류이고 전방 풍속 1.0 m/s에서 4.5 m/s 사이에서 수행되었다. 실험 결과 가습 효율은 외기 조건에 따라 차이가 났다. 데이터 센터 ($25^{\circ}C$ DBT, $15^{\circ}C$ WBT) 조건에서 건물 공조 ($35^{\circ}C$ DBT, $21^{\circ}C$ WBT) 조건보다 크게 나타났는데 그 이유는 입구 영역에서 수분 전달 성능의 차이 때문이다. 심지어 건물 공조 조건에서는 입구 영역에서 제습이 일어났다. 또한 공급수 온도가 외기 공기의 습구온도에 근접할수록 가습 효율이 증가함을 확인하였다. 따라서 가습소자의 성능을 적절히 예측하기 위해서는 입구 영역에 대한 해석 모델이 포함되어야 한다. 한편 소자의 두께가 100 mm에서 200 mm로 되면 가습효율이 29% 증가하고 300 mm가 되면 42% 증가한다. 하지만 압력 손실도 47%, 86% 증가한다.

고분자 전해질 연료전지의 외부가습 조건에 따른 정상상태 및 비정상상태 성능특성 연구 (A study on the steady-state and dynamic performance of polymer electrolyte fuel cells under various external humidification conditions)

  • 이용택;김보성;김용찬;최종민;고장면
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.3407-3412
    • /
    • 2007
  • The performance characteristics of the polymer electrolyte fuel cells (PEFCs) were investigated under various humidification conditions at steady-state and transient conditions. The PEFC studied in this study was characterized by I-V curves in potentiostatic mode. The I-V curves representing steady-state performance were obtained from OCV to 0.25V, and the dynamic performance responses were obtained at some points of voltages. The anodic external humidification was applied and the humidity was controlled from 20% to 100%. The effects of relative humidity of hydrogen were measured with the dry air at the cathode. At high voltage region, the performance at high temperature was higher, but at low voltage region, low temperature condition showed the higher performance. The dynamic responses were observed at the instant when the voltage of the PEFC was changed. It was observed that the performance reached steady-state earlier with the increase of temperature.

  • PDF

Mathematical modeling of humidification process by means of hollow fiber membrane contactor

  • Marjani, Azam;Baghdadi, Ali;Ghadiri, Mehdi
    • Membrane and Water Treatment
    • /
    • 제7권4호
    • /
    • pp.297-311
    • /
    • 2016
  • Modeling and simulation of air humidification by hollow fiber membrane contactors are investigated in the current study. A computational fluid dynamic model was developed by solving the k-epsilon turbulence 2D Navier-Stokes equations as well as mass conservation equations for steady-state conditions in membrane contactors. Finite element method is used for the study of the air humidification under different operating conditions, with a focus on the humidity density, total mass transfer flux and velocity field. There has been good agreement between simulation results and experimental data obtained from literature. It is found that the enhancement of air stream decreases the outlet humidity from 0.392 to 0.340 (module 1) and from 0.467 to 0.337 (module 2). The results also indicated that there has been an increase in air velocity in the narrow space of shell side compared with air velocity wide space of shell side. Also, irregular arrangement has lower dead zones than regular arrangement which leads to higher water flux.

실리콘으로 제작된 소형 연료 전지에서 가습 조건의 최적화 (Humidification Optimization in Silicon-based Miniaturized Fuel Cell)

  • 권오중;원호연;김재정
    • 전기화학회지
    • /
    • 제10권2호
    • /
    • pp.104-109
    • /
    • 2007
  • 연료 전지의 소형화를 위하여 흑연(graphite)를 기본으로 하는 분리판을 실리콘분리판으로 대체하였으며, 실리콘 분리판과 active area가 $4cm^2$인 MEA (membrane electrode assembly)와 결합하여 단위 전지를 제작하였다. 단위 전지에 공급되는 수소와 산소의 공급량은 고정하고 가습기의 구동 온도만을 변화시키면서 단위 전지의 성능을 확인하고 최적의 가습 조건을 결정하였다. 또한 가습 조건이 실리콘으로 제작된 연료 전지 스택에 미치는 영향을 알아보기 위하여 실리콘 분리판과 2개의 MEA로 이루어진 스택을 제작하여 가습 조건의 영향을 알아보고 실리콘 분리판으로 제작된 연료전지 스택의 문제점 및 특징을 알아보았다.

고분자 전해질 연료전지 멀티 스택 시스템의 수소극 흐름방향에 따른 습도분포 및 성능변화 (Humidity Distribution and Performance Variation of a PEMFC Multi Stack System According to the Direction of Anodic Supply)

  • 이용택
    • 설비공학논문집
    • /
    • 제30권3호
    • /
    • pp.143-148
    • /
    • 2018
  • In this study the performance and humidity variation for 2 unit cells connected in series were experimentally measured. The relative flow direction of hydrogen and air was changed from parallel flow to counter flow. Internal humidity distribution was then measured by 5 embedded sensors on each channel. In all experimental conditions, the former unit cell showed a better performance and the gap is noted to be higher when counter flow is applied. The performance was noted to be higher at high humidification case in the parallel flow. However, in the counter flow, the difference of performance according to the humidification is negligible. Hydrogen and air are discharged from the PEMFC unsaturated with water vapor at parallel flow/low humidification condition, which explains lower performance of the PEMFC than other conditions. The humidities in hydrogen and air streams of counter flow were noted to increase rapidly even at low humidification condition and the consequential even hydration of membrane is the reason of higher performance.

흡기 가습에 의한 압축 착화엔진 실린더 내 디젤 연료 분무 특성 예측 (Prediction of Diesel Fuel Spray Characteristics in Compression Ignition Engine Cylinder by Intake Humidification)

  • 민세훈;서현규
    • 한국분무공학회지
    • /
    • 제23권1호
    • /
    • pp.30-35
    • /
    • 2018
  • The objective of this study is to predict numerically the effect of intake humidification on the injected diesel fuel spray characteristics in a compression ignition engine. In this work, Wave model and Ducowicz model were applied as the break-up model and evaporation model, respectively. The amount of water vapor for the humidification was changed from 0% to 30% of injected fuel mass. The number of applied meshes was generated from 49,000 to 110,000. At the same time, the results of this work were compared in terms of spray tip penetration, SMD and equivalence ratio distributions. It was found that the cylinder temperature and cylinder pressure were decreased with increasing water vapor mass by vaporization latent heat and specific heat, however, the difference was very small. So, the spray tip penetration was not different by water vapor mass. Also, higher equivalence ratio distributions were observed with increasing water vapor mass by the improvement of fuel atomization.

On/Off 제어에 의한 습도와 결로의 제어에 관한 연구 (A Study on The Control of Humidification and Dew Condensation by On/Off Control)

  • 박대흠;김두희;김경훈;정영관
    • 한국수소및신에너지학회논문집
    • /
    • 제22권6호
    • /
    • pp.835-841
    • /
    • 2011
  • The humidification is essential for performance enhancement of the electrolysis of PEMFC because proton conductivity depends on hydration of the proton exchange membrane. In this study, the humidification experiment did about On/Off control the humidification and dew condensation for PEMFC by using of the membrane humidifiers. As the results, it was possible to approximation control of the humidity by using of the solenoid valve On/Off control on the membrane humidifier. Also the problem on the dew condensation was resolved by approximation humidity control through solenoid valve On/Off control and the removal of the dew condensation in the flow channel was verified through visualization experiment.

수술 중 흡입가스의 가온가습이 체온, 혈압 및 떨림에 미치는 효과 -일반회로 적용군과의 후향적 비교연구- (The Effects of Intra-operative Heated Humidification on Body Temperature, Blood Pressure and Shivering of Patients Undergoing General Anesthesia)

  • 배익렬;허명행
    • 임상간호연구
    • /
    • 제17권2호
    • /
    • pp.192-203
    • /
    • 2011
  • Purpose: The purpose of this study was to compare the body temperature (BT), blood pressure (BP) and shivering in patients undergoing operation under general anesthesia between the heated humidification circuit tube (HHCT) group and the non-HHCT group. Methods: Data were extracted from the participants' medical records from September 1st to December 30th, 2009. The HHCT group consisted of 50 cases who were applied with heated and humidified gas via a specially designed circuit under general anesthesia. The HHCT which was adjusted at $41^{\circ}C$ was applied from induction of general anesthesia to extubation. In comparison, the non-HHCT group consisted of 50 cases who were applied with gas through standard breathing circuit without heat and humidification. Collected data were analyzed by $x^2$ test, t-test and repeated measures ANOVA. Results: The BT and shivering were significantly different between two groups (p<.001). But the BP was was not signigicantly different between the HHCT group and the non-HHCT group. Conclusion: The application of heated and humidified gases to patients under general anesthesia was effective in preserving the body temperature and reducing the shivering.

Effect of Humidification and Hardening Treatment on Seed Germination of Rice

  • Lee, Suk-Soon;Kim, Jae-Hyeun;Hong, Seung-Beom;Yun, Sang-Hee
    • 한국작물학회지
    • /
    • 제43권3호
    • /
    • pp.157-160
    • /
    • 1998
  • To find out the effects of humidification and hardening of rice (Oryza sativa L. cv. Ilpumbyeo) seeds on the germination, both normal and artificially aged seeds with 60% germination rate were humidified at 40, 60, and 80% RHs and $25^{\circ}C$ for five weeks or hydrated for 6, 12, 18, and 24 hours at $25^{\circ}C$ from one to five cycles for hardening. Relative humidity and duration of humidification did not affect the germination rate of normal seeds, while reduced the time to get 50% germination rate ($T_{50}$) by 1.0~1.6 days compared to that of normal seeds at $25^{\circ}C$. Aged seeds humidified at 40 and 60% RHs did not affect the germination rate and $T_{50}$ regardless of relative humidity and duration of treatment, while at 80% RH, the germination rate decreased and $T_{50}$ increased significantly with the duration of humidification. Hardening of normal seeds reduced $T_{50}$ by 0.7~1.1 days without changes in the germination rate. However, the germination rate and $T_{50}$ of aged seeds soaked in water for 6, 12, and 18 hours were similar regardless of soaking/drying cycles, while hardening of artificially aged seeds with 1~4 cycles in 24 hours soaking increased the germination rate by 11-16% and reduced $T_{50}$ by 1.4~2.0 days.

  • PDF