• 한국전자파학회논문지
• /
• 제17권3호
• /
• pp.259-266
• /
• 2006

본 논문에서는 인체 모델 시뮬레이터를 이용해 인체 내부에 소스를 인가한 경우에 대한 전파 특성을 제시하였다. 시뮬레이터는 인체 캐드 및 조직 데이터로 구성된 인체 자료에 FDTD 기법을 적용하였다. 시뮬레이터에 대한 정확성을 검증한 후, 전계 소스가 소장 중앙에 인가된 경우에서 소화관 중 소장을 포함하는 수평층의 수신파를 계산하였다. 시뮬레이션 결과로부터 다양한 수신 지점에 대해 단위 길이 당 경로 손실을 구함으로써 인체전파 특성을 보였다.

• 대한한의진단학회지
• /
• 제10권2호
• /
• pp.132-150
• /
• 2006

Objectives : The objective is that we measure and analyze Pulse-Respiration Ratio and Body Composition Analysis to study the correlation between both. Methods : First, after subjects take a rest over 10 minutes, we measure their electrocardiogram and respiration pattern through which we take average peak interval to calculate an average pulse cycle and a respiration cycle. An average respiration cycle divided by an average Pulse Rate gives Pulse-Respiration Ratio. Next, we draw out 22 Body Composition Analysis indicators by using In-Body 720 model. Last, we analyze and take statistics on them by using SPSS 13.0 program. Results : Negative is the correlation between P/R Ratio and Body Composition Analysis indicator like fatness degree, body fat volume, body fat rate, abdominal fatness, BMI. Conclusions : 1. The higher P/R Ratio the more likely to be thin, the lower P/R Ratio the more likely to be fat. 2. We separately analyze P/R Ratio depending on each breathing frequency and pulse frequency to find out that breathing frequency has great influence and that breathing frequency decides the fatness degree. 3. In study on the correlation between P/R Ratio and Body Composition Analysis, fatness degree, in-body fat volume, in-body fat rate, BMI are the related indicators, which shows the connection with the fatness indicators. 4. In study on the correlation between Han-Yeol [寒熱] grade and Body Composition Analysis indicators, the result is that Han[寒] has no connection and that only Yeol[熱] grade has something to do with it, which means the higher heat symptom subjects have, the more basic metabolism volume and muscular build they have.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1857-1862
• /
• 2016

Human activity recognition using depth information is an emerging and challenging technology in computer vision due to its considerable attention by many practical applications such as smart home/office system, personal health care and 3D video games. This paper presents a novel framework of 3D human body detection, tracking and recognition from depth video sequences using spatiotemporal features and modified HMM. To detect human silhouette, raw depth data is examined to extract human silhouette by considering spatial continuity and constraints of human motion information. While, frame differentiation is used to track human movements. Features extraction mechanism consists of spatial depth shape features and temporal joints features are used to improve classification performance. Both of these features are fused together to recognize different activities using the modified hidden Markov model (M-HMM). The proposed approach is evaluated on two challenging depth video datasets. Moreover, our system has significant abilities to handle subject's body parts rotation and body parts missing which provide major contributions in human activity recognition.

• 한국의류학회지
• /
• 제48권1호
• /
• pp.108-119
• /
• 2024

In this study, we aimed to propose enhancements to the dimensions and design of walking aids tailored for elderly women. Specifically, we focused on wheeled walking assistance devices and aligned each structural component with the appropriate human body dimensions to suggest appropriate product dimensions organized by size clusters, aiming to maximize the practicality of the results. We extracted essential factors required for product design, including human body size elements. The dimension extraction method was clustered to establish connections between key human body parameters-such as height, weight, and age groups-and product dimensions. We conducted a comparative analysis of walking aid product dimensions according to the design elements and sizes of models currently available in the market. The outcomes of this study offer objective, data-driven insights into areas where existing models on the market could benefit from improvement and we anticipate that the findings of this study will provide a solid, quantitative foundation for individuals when selecting the most suitable model for their needs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.635-636
• /
• 2008

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.369-374
• /
• 2004

This study aims to measure an apparent mass of a seated human body at the sitting posture in a passenger car in the frequency range from 1 to 20 Hz and to investigate the dynamic characteristics. Thirty subjects joined the test where eight levels of acceleration from $0.1m/s^2\;to\;2.0m/s^2$ were used to excite seated human body. Most of apparent mass curves showed two peaks in the frequency range of $4\sim9Hz$, first peak was clearer at the contact point of the seat and the hip, and the second one at the contact point of the backrest and the back. Both peak frequencies were found to move down to lower frequencies with increase of acceleration magnitude. Shapes of apparent mass curves were clearly different from those at erect posture especially in the frequency range around and above the second peak.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.54-59
• /
• 2003

The discharge energy by electrostatic discharge of the charged human body is calculated under the assumption that the stored charge is dissipated completely. However, it is well-known that the charge is slightly remained after electrostatic discharge. Therefore, The Rompe-Weisel model of the discharge analysis, which has somewhat more of a physical justification than the conventional energy equation, is proposed. It is proposed that the electrical conductivity of the arc should be proportional to the energy density transferred to it by Ohmic dissipation. For the electrostatic discharge energy analysis, the Rompe-Weisel model was compared by quasi static analysis. As a consequence, a study on a reliable energy evaluation based on simulation models during electrostatic discharge is carried out in this paper and is adopted to estimate the explosion hazards of flammable gases.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권10호
• /
• pp.521-528
• /
• 2007

본 논문에서는 가상원통을 이용하여 기하학적인 의복시뮬레이션에서 발생하는 의복 3차원모델의 관통을 고속으로 검사하고, 의복 3차원모델을 수정하는 새로운 방법을 제안한다. 의복을 개인 캐릭터에 기하학적으로 맞추는 경우, 의복이 인체를 국부적으로 관통하는 경우가 있다. 본 방법은 인체모델과 의복모델을 둘러싼 가상원통을 설정하고, 가상원통을 이용하여 관통지점의 후보들을 한 번에 압축하여, 후보 중에서 관통지점을 찾는 방법이다. 관통된 부분에서는 의복모델의 꼭지점을 밀어내거나 삼각형을 분할하여, 의복모델을 기하학적으로 수정한다. 이 방법은 바운딩볼륨을 이용하여 반복적으로 관통후보를 압축하는 물리적인 방법에 비해 고속처리가 가능하다.

• 한국멀티미디어학회논문지
• /
• 제19권12호
• /
• pp.1927-1935
• /
• 2016

This paper propose a framework for human body parts in RGB-D image. We conduct tasks of obtaining person area, finding candidate areas and local detection in order to detect hand, foot and head which have features of long accumulative geodesic distance. A person area is obtained with background subtraction and noise removal by using depth image which is robust to illumination change. Finding candidate areas performs construction of graph model which allows us to measure accumulative geodesic distance for the candidates. Instead of raw depth map, our approach constructs graph model with segmented regions by quadtree structure to improve searching time for the candidates. Local detection uses HOG based SVM for each parts, and head is detected for the first time. To minimize false detections for hand and foot parts, the candidates are classified with upper or lower body using the head position and properties of geodesic distance. Then, detect hand and foot with the local detectors. We evaluate our algorithm with datasets collected Kinect v2 sensor, and our approach shows good performance for head, hand and foot detection.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.787-796
• /
• 1995

A man model is a useful design tool for the evaluation of man machine systems and products. An arm reach trajectory prediction for such a model will be specifically useful to present human activities and, consequently, could increase the accuracy and reality of the evaluation. In this study, a three-dimensional reach trajectory prediction model was developed using an inverse kinematics technique. The upper body was modeled as a four link open kinematic chain with seven degrees of freedom. The Resolved Motion Method used for the robot kinematics problem was used to predict the joint movements. The cost function of the perceived discomfort developed using the central composite design was also used as a performance function. This model predicts the posture by moving the joints to minimize the discomfort on the constraint of the end effector velocity directed to a target point. The results of the pairwise t-test showed that all the joint coordinates except the shoulder joint's showed statistically no differences at .alpha. = 0.01. The reach trajectory prediction model developed in this study was found to accurately simulate human arm reach trajectory and the model will help understand the human arm reach movement.