• 대한의용생체공학회:의공학회지
• /
• 제24권3호
• /
• pp.233-239
• /
• 2003

측방 낙상에 관계된 상해는 노인들에 있어서 가장 치명적이고 빈번한 의료 문제를 야기한다. 측방 낙상에 의해 발생하는 심각한 결과 중 하나인, 고관절 골절은 넘어진 사람 중 약 1%에서만 발생하지만 고관절 골절은 신체장애, 사망 및 이에 관련된 의료비용의 상승 등을 초래한다. 본 연구에서는 측방 낙상시 고관절 골절에 큰 영향을 미치는 충돌 단계에서의 위험요소를 하중각도로 가정하여 이 요소에 대한 영향과 직립시와 비교하여 상대적인 위험도를 비교하고자 하였다. 실험 조건은 이전 연구자의 자료를 토대로 모사골반을 구성하였고, 이렇게 구성된 모사골반을 진자형 충격 시험기에 고정시키고 충격각도(0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$)를 변화시켜가며 대퇴골의 동적 거동을 조사하였다. 본 실험을 통하여 하중각도의 변화가 대퇴골 근위부에서의 변형에 영향을 주며, 다른 부위에 비해 대퇴골 경부에 상대적으로 큰 변형이 생겨 골절 가능성이 높다는 것을 확인하였다. 또한 낮은 충격속도에서도 직립 상태에 비해 큰 변형을 보였으며, 변형 분포의 차이도 나타내었다. 따라서 변형 크기의 차이뿐만 아니라 이러한 변형 분포의 차이도 고관절 골절 기전에 영향을 줄 것으로 사료된다.

• Journal of Korean Neurosurgical Society
• /
• 제58권6호
• /
• pp.578-581
• /
• 2015

A rigid spino-pelvic fixation to anchor long constructs is crucial to maintain the stability of long fusion in spinal deformity surgery. Besides obtaining immediate stability and proper biomechanical strength of constructs, the S2 alar-iliac (S2AI) screws have some more advantages. Four Korean fresh-frozen human cadavers were procured. Free hand S2AI screw placement is performed using anatomic landmarks. The starting point of the S2AI screw is located at the midpoint between the S1 and S2 foramen and 2 mm medial to the lateral sacral crest. Gearshift was advanced from the desired starting point toward the sacro-iliac joint directing approximately $20^{\circ}$ angulation caudally in sagittal plane and $30^{\circ}$ angulation horizontally in the coronal plane connecting the posterior superior iliac spine (PSIS). We made a S2AI screw trajectory through the cancellous channel using the gearshift. We measured caudal angle in the sagittal plane and horizontal angle in the coronal plane. A total of eight S2AI screws were inserted in four cadavers. All screws inserted into the iliac crest were evaluated by C-arm and naked eye examination by two spine surgeons. Among 8 S2AI screws, all screws were accurately placed (100%). The average caudal angle in the sagittal plane was $17.3{\pm}5.4^{\circ}$. The average horizontal angle in the coronal plane connecting the PSIS was $32.0{\pm}1.8^{\circ}$. The placement of S2AI screws using the free hand technique without any radiographic guidance appears to an acceptable method of insertion without more radiation or time consuming.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.293-302
• /
• 2019

In the past, there was a theory that influenza wasn't transmitted directly from birds but was infected to humans via swains. Recently, molecular level research has progressed, and it was confirmed that the avian influenza virus can directly infected to human lung and intestinal epithelial cells. Three pandemicsin the past 100 years were also infected to humans directly from birds. In view of such scientific background, we are developing a method for screening sick birds by monitoring the physiological characteristics of birds in a contactless manner with sensors. Here, the movement of respiratory muscles and abdominal muscles under autonomic innervation was monitored using a magnet and Hall sensor sewn on the thoracic wall, and other multimedia devices. This paper presents and discusses the results of experiments involving continuous periodic noise discovered during flight experiments with a data logger mounted on a Japanese pheasant from 2012 to 2015. A brief summary is given as the below: 1. Magnet and Hall sensor sewn to the left and right chest walls, bipolar electrocardiograms between the thoracic walls, posterior thoracic air sac pressure, angular velocity sensors sewn on the back and hips, and optical reflection of LEDs (blue and green) from the skin of the hips allow observation of periodic vibrations(fasciculations) in the waves. No such analysis has been reported before. 2. These fasciculations are presumed to be derived from muscle to maintain and control air sac pressure. 3. Since each muscle fiber is spatially Gaussian distributed from the sympathetic nerve, the envelope is assumed to plot a Gaussian curve. 4. Since avian trunk muscles contract periodically at all time, we assume that the sympathetic nerve dominates in their control. 5. The technique of sewing a magnet to the thoracic wall and measuring the strength of the magnetic field with a Hall sensor can be applied to screen for early stage of avian influenza, with a sensor attached to the chicken enclosure.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제6권9호
• /
• pp.369-376
• /
• 2017

최근, RSSI 기반의 핑거프린팅 위치추정 기술은 실내 위치 기반 서비스에 널리 사용되고 있다. 기존의 핑거프린팅 기법에서는 위치추정 정확도를 높이기 위해 수신 되는 최대한 많은 수의 AP들을 사용하거나, 측위에 소요되는 시간을 줄이기 위해 RSSI 신호의 세기가 가장 강한 일부의 AP만을 선택하여 사용하였다. 그러나 실제 환경에서 발생하는 사람의 움직임이나 이동하는 장애물등의 주변 환경 변화에 따른 RSSI의 오차가 반영되지 않았다. 이러한 환경변화는 RSSI 신호 세기의 예측값과 실측값과의 차이를 발생시키는 원인이 되며, 위치추정에 예측할 수 없는 오차를 발생시키게 된다. 따라서, 환경요인에 의한 오차 발생을 완화하기 위해서 주변 환경 변화를 고려하여 실내 측위에 적절한 AP들을 선택하여 사용하는 기술이 필요하다. 본 논문에서는 주변 환경의 영향을 고려하여 안정적인 AP만을 선택하는 방식과 이에 적합한 측위 알고리즘을 제안한다. 또한 실험을 통하여 제안한 방식과 기존의 AP 선출 방식의 성능을 비교 분석하였다.

• 한국재료학회지
• /
• 제17권6호
• /
• pp.318-322
• /
• 2007

Porous ${\beta}-tricalcium$ phosphate $({\beta}-TCP)$ bioceramic was fabricated by pressureless sintering using commercial HAp and different volume percentages of PMMA powders (30-60 vol.%). The range of spherical pore size was about $200-250\;{\mu}m$ in diameter. By increasing the PMMA content, the number of pores and their morphology were dramatically changed as well as decreased the material properties. In case of using 60 vol.% PMMA content, network-type pores were found, due to the necking of the PMMA powders. The values of relative density, elastic modulus, bending strength and hardness of the 60 vol.% PMMA content sample, sintered at $1500^{\circ}C$, were about 46%, 22.2 GPa, 5MPa and 182 Hv respectively. Human osteoblast-like MG-63 cells and osteoclast-like Raw 264.7 cells were well grown and fully covered all of the porous ${\beta}-TCP$ bodies sintered at $1500^{\circ}C$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1983-1989
• /
• 2005

Industrial robots are powerful, extremely accurate multi-jointed systems, but they are heavy and highly rigid because of their mechanical structure and motorization. Therefore, sharing the robot working space with its environment is problematic. A novel pneumatic artificial muscle actuator (PAM actuator) has been regarded during the recent decades as an interesting alternative to hydraulic and electric actuators. Its main advantages are high strength and high power/weight ratio, low cost, compactness, ease of maintenance, cleanliness, readily available and cheap power source, inherent safety and mobility assistance to humans performing tasks. The PAM is undoubtedly the most promising artificial muscle for the actuation of new types of industrial robots such as Rubber Actuator and PAM manipulators. However, some limitations still exist, such as the air compressibility and the lack of damping ability of the actuator bring the dynamic delay of the pressure response and cause the oscillatory motion. In addition, the nonlinearities in the PAM manipulator still limit the controllability. Therefore, it is not easy to realize motion with high accuracy and high speed and with respect to various external inertia loads in order to realize a human-friendly therapy robot To overcome these problems a novel controller, which harmonizes a phase plane switching control method with conventional PID controller and the adaptabilities of neural network, is newly proposed. In order to realize satisfactory control performance a variable damper - Magneto-Rheological Brake (MRB) is equipped to the joint of the manipulator. Superb mixture of conventional PID controller and a phase plane switching control using neural network brings us a novel controller. This proposed controller is appropriate for a kind of plants with nonlinearity uncertainties and disturbances. The experiments were carried out in practical PAM manipulator and the effectiveness of the proposed control algorithm was demonstrated through experiments, which had proved that the stability of the manipulator can be improved greatly in a high gain control by using MRB with phase plane switching control using neural network and without regard for the changes of external inertia loads.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.16-27
• /
• 2015

Holography technology which was developed by Dennis Gabor (1900~1979) in 1948 is a technology to record wave planes of actual 3D objects. It is known as the only technology which can express 3D information most perfectly close to human-friendly. Holography technology is widely used in advertisement, architecture and arts as well as science technology areas. Especially, digital holographic print which is an applied area is greatly used in military map, architecture map and cultural asset restoration by printing and reproducing 3D information. Holography is realized by recording and reproducing the amplitude and phase information on high resolution film using coherent light like laser. Recording materials for digital holographic printer are silver halide, photoresist and photopolymer. Because the materials have different diffraction efficiency according to film characteristics of each manufacturer, appropriate guide lines should be suggested through efficiency analysis of each film. This paper suggests appropriate guide lines through the diffraction efficiency measurement of silver halide which is a holographic printer recording medium. And the objective of this study is to suggest appropriate guide lines through diffraction efficiency analysis of Ultimate 08-C and PFG-03C which are commercially used. The experiment was prepared by self-diffraction efficiency system which measures the strength with the defector by penetrating RGB recording medium and concentrating diffracted beams through collimating lens. The experiment showed Geola's PFG-03C which is a silver halide for full color has price/performance advantage in optical hologram recording, but recording angles and reproduction angles are irregular for digital holographic printer recording. Ultimate's Ultimate08-C for full color shows its diffraction efficiency is relatively stable and high according to recording angles and laser wavelength.

• 지역사회간호학회지
• /
• 제16권2호
• /
• pp.177-185
• /
• 2005

Purpose: This study was to examine the effects of an exercise program on physical fitness, cardiopulmonary function and life satisfaction for adult women. Method: The exercise program combined dance and resistance training. The subject group consisted of 114 women aged between 33 and 60. Three 8-week sessions consisted of 55-80% HR max for 60-90 minutes a day and 3 times a week from March to November, 2004. Data were collected through pre- and post-exercise tests before and after each session. Data were collected with dynamometer, sphygmomamometer, spirometer and structured questionnaires. Data were analyzed employing descriptive statistics and paired t-test with SPSS/PC(10.0version) program. Results: There were significantly positive changes in muscle strength, flexibility, balance quality, forced vital capacity and life satisfaction, but no significantly positive changes in agility and blood pressure. Conclusion: This study showed that an exercise program has partially positive effects for adult women. The results of this study suggest that there should be programs of continuous exercise at community health centers for adult women's health.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권5호
• /
• pp.299-310
• /
• 2012

Purpose: The purpose of this study was to evaluate the histological healing process of 3 different types of xenogenic tooth bone graft material and xenogenic bone graft material. Methods: Three types of human tooth bone graft material (chips, crowns, and roots) and BioOss (Geistlich Pharma AG, Wolhausen, Switzerland) was filled at the preformed 4 round-shaped calvarial bone defects of beagle dogs. The beagles were sacrificed at 2, 4, 8, and 12 weeks, respectively, for radiological and histological evaluation. Results: Increased strength and radiopacity were detected in all graft material groups in time-dependent manner. New bone was formed and matured surrounding the graft material histologically. Also, a new bone was directly integrated with graft material. Conclusion: It was expected that newly developed tooth bone graft material would show good bone healing capacity if it was used as a graft material for the restoration of bony defect.

• 대한치과교정학회지
• /
• 제43권5호
• /
• pp.242-247
• /
• 2013

Objective: To test the null hypothesis that no difference exists between the effects of at-home bleaching and in-office bleaching on shear bond strength (SBS) with bracket bonding at 4 different time intervals after dental bleaching. Methods: Ninety extracted human premolars were randomly divided into 9 groups (n = 10) according to the bleaching methods used (at-home bleaching and in-office bleaching) and the storage time in artificial saliva (30 min, 1 day, 2 weeks, and 3 weeks before bonding). The control group was stored in artificial saliva for 7 days. Brackets were bonded with the Transbond XT adhesive system, and SBS testing was performed. The adhesive remnant index (ARI) was used to assess the amount of resin remaining on the enamel surfaces after debonding. The SBS data were analyzed by analysis of variance (ANOVA) and the Tukey test. For the ARI, the Kruskal-Wallis test was performed. Significance for all statistical tests was predetermined to be p < 0.05. Results: The SBS of the unbleached group was significantly higher (p < 0.05) than that of the bleached groups (except for the group bonded 30 min after at-home bleaching). Conclusions: The null hypothesis was not totally rejected. All bleaching groups tested had decreased SBS of the brackets to the enamel, except for the group bonded 30 min after at-home bleaching. The SBS returned to values close to those of the unbleached enamel within 3 weeks following bleaching.