• 한국HCI학회논문지
• /
• 제10권2호
• /
• pp.21-26
• /
• 2015

NUI(Natural User Interface)는 사용자의 자연스러운 동작이나 동작 시 발생하는 생체 신호를 해석하여 기계에 명령을 내리는 것을 말한다. 물리적인 변화가 있어야 사용이 가능한 가속도 센서나 영상 기반의 NUI와는 달리 특정 동작과 관련된 근육의 표면 근전도(surface Electromyogram, sEMG)를 측정하면 실제 움직임이 발생하지 않아도(isometric contraction) 동작 의도를 예측할 수 있다. 본 연구에서는 근전도 기반으로 손목 동작 의도를 분류할 때 전극 개수에 따른 정확도를 확인하고, 키보드 등에 적용 가능한 인터페이스 기술을 제안한다. 손목의 동작 중 신전(extension, up), 굴곡(flexion, down), 외전(abduction, right), 내전(adduction, left)의 네 가지 동작 의도를 분류하는 실험을 진행하였다. 50ms 간격으로 계산된 제곱평균제곱근(Root Mean Square, RMS)을 특징으로 사용하였고, 동작 의도 인식을 위해 역전파 알고리즘으로 학습한 다층 퍼셉트론 분류기를 사용하였다. 전극 쌍의 개수를 네 개(91.9%), 세 개(87.0%), 두 개(78.9%)로 줄여가며 정확도를 확인했다. 전극 쌍의 개수가 네 개에서 두 개로 줄었을 때 정확도는 약 13% 감소하였다. 두 쌍의 전극만 사용하는 경우의 분류 정확도를 높이기 위하여 직전의 RMS를 특징에 추가하였다. 150 ms 이전까지의 정보를 사용하였을 때, 분류 정확도가 78.9%에서 83.6%로 4.6% 증가하였다. 전극 쌍의 개수가 감소함에 따라 정확도는 감소하였지만, 이전 데이터를 함께 사용한 경우 부분적으로 증가 시킬 수 있음을 확인하였다.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.99-118
• /
• 2004

The aim of this study is to evaluate tennis shoes's plantar pressure distribution in tennis prayers and to determine the influence of the shoe on various tennis movements. When investigating the biomechanics of movement in tennis, one of the first things to do is to understand the movement patterns of the sport, specifically how these patterns relate to different tennis shoes. Once these patterns are understood, footwear company can design tennis shoes that match the individual needs of tennis players. Plantar pressure measurement is widely employed to study foot function, the mechanical pathogenesis for foot disease and as a diagnostic and outcome measurement tool for many performance. Measurements were taken of plantar pressure distribution across the foot and using F-Scan(Tekscan Inc.) systems respectively. The F-Scan system for dynamic in-shoe foot pressure measurements has enabled us to assess quantitatively the efficacy of different types of footwear in reducing foot pressures. The Tekscan F-Scan system consists of a flexible, 0.18mm thick sole-shape having 1260 pressure sensors, the sensor insole was trimmed to fit the subjects' right, left shoes. For this study 4 university male, high level tennis players were instructed to hit alternated forehand stroke, backhand stroke, forehand volley, backhand volley, smash, service movement in 4 different tennis shoes. 1. When impact in tennis movement, peak pressure distribution of landing foot displayed D>C>B>A, A displayed the best low pressure distribution. A style's tennis shoes will suggest prayer with high impact. If prayer with high impact feeling during pray in tennis wear A style, it will decrease injury, will have performance improvement. 2. When impact in tennis movement, plantar pattern of pressure distribution in landing foot displayed B>A>C>D in stability performance. During tennis, prayer want to stability movement suggest B style tennis shoes when tennis movement impact keep stability of human body. B style tennis shoes give performance improvement 3. When impact in tennis movement, plantar pattern of center of force(C.O.F.)trajectory in landing foot analyzed this : 1) When stroke movement and volley movement in tennis, prayer better to rearfoot movement. 2) when service movement, prayer midfoot strike movement. 3) when smash movement, prayer have forefoot strike movement.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.161.5-161
• /
• 2001

Robots are required to assist our activities in daily life. In this paper, we focus on arm movement to catch moving object as one of important tasks frequently performed by human. We propose an algorithm which enables a robot to perform human-like arm motion to catch a moving object. First we analyze human hand trajectories and velocity profiles to catch an object. From the experimental results, we extract some characteristics in the process of approaching and following a moving object and confirm that these are necessary to realize human-like motion. We then adopt an instantaneous optimal control method which evaluates the error and energy cost at each sampling step, and design two time-varying weight matrices to introduce human characteristic into robot motion. The matrix concerning the error is defined as a time-increasing ...

• 한국멀티미디어학회논문지
• /
• 제21권4호
• /
• pp.478-484
• /
• 2018

The choice of the motion features influences the result of the human action recognition method directly. Many factors often influence the single feature differently, such as appearance of the human body, environment and video camera. So the accuracy of action recognition is restricted. On the bases of studying the representation and recognition of human actions, and giving fully consideration to the advantages and disadvantages of different features, the Dense Trajectories(DT) algorithm is a very classic algorithm in the field of behavior recognition feature extraction, but there are some defects in the use of optical flow images. In this paper, we will use the improved Dense Trajectories(iDT) algorithm to optimize and extract the optical flow features in the movement of human action, then we will combined with Support Vector Machine methods to identify human behavior, and use the image in the KTH database for training and testing.

• Journal of information and communication convergence engineering
• /
• 제21권4호
• /
• pp.337-345
• /
• 2023

In this study, we formulated a method that evaluates Taekwondo Poomsae performance using a series of choreographed training movements. Despite recent achievements in 3D human pose estimation (HPE) performance, the analysis of human actions remains challenging. In particular, Taekwondo Poomsae action analysis is challenging owing to the absence of time synchronization data and necessity to compare postures, rather than directly relying on joint locations owing to differences in human shapes. To address these challenges, we first decomposed human joint representation into joint rotation (posture) and limb length (body shape), then synchronized a comparison between test and reference pose sequences using DTW (dynamic time warping), and finally compared pose angles for each joint. Experimental results demonstrate that our method successfully synchronizes test action sequences with the reference sequence and reflects a considerable gap in performance between practitioners and professionals. Thus, our method can detect incorrect poses and help practitioners improve accuracy, balance, and speed of movement.

• 대한의용생체공학회:의공학회지
• /
• 제45권2호
• /
• pp.57-65
• /
• 2024

Recently, several studies have been conducted to lower the cost of transport of human by adding external joint stiffness elements. However, it has not been clearly elucidated whether adaptation time is required for human subjects to adapt to the added external joint stiffness. In this study, carbon plates in the form of shoe midsoles were added to the metatarsophalangeal joint, and the lower limb joint torque and mechanical energy consumption were compared before and after a total of 5 sessions (2.5 weeks) of running. A total of 11 young healthy participants exhibited higher elastic energy storage in carbon plates in the fifth session compared to the first session, and lower power in the ankle joint. This suggests that a single training session may be insufficient to validate the efficiency effect of added joint stiffness, and the human body seems to increase the elastic energy stored in the assistive joint stiffness and its reutilization.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2887-2890
• /
• 2003

This paper describes the possibility of analyzing gait pattern from the variation of the lower leg electrical impedance. This impedance is measured by the four-electrode method. Two current electrodes are applied to the thigh, knee, and foot, and two potential electrodes are applied to the lateral, medial, and posterior position of lower leg. The correlation coefficients of the joint angle and the impedance change from human leg movement was obtained using electrogoniometer and 4ch impedance measurement system developed in this study. We found the optimal electrode position for ankle, knee and hipjoint movements based on high correlation coefficient, least interference, and maximum magnitude of impedance change. The correlation coefficients of the ankle, knee, and the hip movements -0.87, 0.957 and 0.80. respectively. From such features of the lower leg impedance, it has been made clear that different movement patterns exhibit different impedance patterns and impedance level. This system showed possibility that lower leg movement could be easily measured by impedance measurement system with a few skin-electrodes.

• 한국유기농업학회지
• /
• 제12권1호
• /
• pp.67-80
• /
• 2004

Farm economy is getting worse because of the free trade trends in agriculture sector and unreasonable application of market economy principles to agricultural products. And The worldwide issues of environmental pollution as well as want of food, water and energy make human future be anxious. In addition, consumers raise questions in argument about safety of foods produced by traditional farming or imported. So I propose the urban-rural living community movement(URLCM) as an alternative plan for sustainable domestic agriculture. URLCM based on environmentally friendly agriculture and community consciousness will be able to solve many of present issues on agriculture and rural society through incessant interchanges between urban and rural community. This URLCM has to be basically founded on principles of symbiosis-coexistence and life circulation. So those that have to be driven forward arc organizing producers and consumer cooperatives, making environmentally friendly rural region and products, combining with consumer cooperatives, training the participants and so forth.

• 한국실내디자인학회논문집
• /
• 제14권1호
• /
• pp.160-167
• /
• 2005

The paper raises a question in argument about the method of creating space depending on accidental creation by computer as the method of describing movement pattern, and emphasizes the role of the mathematics which may change the shape into the image or reflection, that is, data which human may understand and expect. If the mathematics could be the method of describing movement pattern, it may play a important role on the analysis of architectural space based on the idea of post-constructionism, which is likely to consider the modern architectural space recognized as the sequential frames containing movement, as the suspended state of the moving object. And then, this infinite series, 'the sum' of the suspended state, is not studied mathematically and scientifically, but is able to be shaped by reviewing the validity in mathematics about the nonlinear space. This is, therefore, the fundamental research in order to define the role of the mathematics in formation of space of contemporary architecture.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.699-702
• /
• 2002

Shunt valves implanted in the subcutaneous tissue of brain to treat patient with hydrocephalus were numerically simulated to investigate influence of pressure pulsation on their flow control characteristics. Shunt valves are subjected to pressure variation since ventricles enclosing the brain are under pressure pulsation rather than uniform pressure due to blood pressure variation. We modeled flow orifice through shunt valve and imposed pulsating pressure and valve diaphragm movement to compute flow through the valve. The results of our study indicated that flow rate increased by $40{\%}$ by introducing pressure pulsation and diaphragm movement on the shunt valve. Our results demonstrate the pressure-flow control characteristics of shunt valves unplanted above human brain may be quite different from the characteristics obtained by syringe pump test with uniform pressure and no diaphragm movement.