• 방송공학회논문지
• /
• 제25권4호
• /
• pp.487-496
• /
• 2020

차세대 로봇 공연 기술을 개발하기 위하여 산업용 로봇 arm에 휴머노이드형의 로봇 액터를 부착한 RAoRA (Robot Actor on Robot Arm) 구조를 제안하고, 시스템 연동 제어를 위한 소프트웨어를 탑재하여 로봇 공연 플랫폼을 구축하였다. 로봇 액터와 산업용 로봇 arm의 연동 모션을 위하여 역학적 분석을 수행하고 기계적 메커니즘을 설계 및 제작하였다. 로봇 액터의 동작을 위하여 3D 모델의 기구학적인 분석, spline 위치 보간, 모션 제어 알고리즘 및 제어 장치를 개발하였다. 비전문가도 직관적이고 안전한 공연 콘텐츠를 제작할 수 있도록 사전 시각화, 시뮬레이션 도구 및 콘솔 통합 운영 도구를 개발하였다. 테스트를 위하여 지면에 거의 밀착하여 자연스럽게 걷거나 서서히 공중으로 올라가는 air walk 시연하였고 러닝 타임 5분의 공연에 적용하였다. 그 결과 제안된 로봇 공연 플랫폼은 기존의 로봇 공연에서는 구현이 불가능했던 입체적이고 생동감 있는 모션을 구현할 수 있었다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.787-796
• /
• 1995

A man model is a useful design tool for the evaluation of man machine systems and products. An arm reach trajectory prediction for such a model will be specifically useful to present human activities and, consequently, could increase the accuracy and reality of the evaluation. In this study, a three-dimensional reach trajectory prediction model was developed using an inverse kinematics technique. The upper body was modeled as a four link open kinematic chain with seven degrees of freedom. The Resolved Motion Method used for the robot kinematics problem was used to predict the joint movements. The cost function of the perceived discomfort developed using the central composite design was also used as a performance function. This model predicts the posture by moving the joints to minimize the discomfort on the constraint of the end effector velocity directed to a target point. The results of the pairwise t-test showed that all the joint coordinates except the shoulder joint's showed statistically no differences at .alpha. = 0.01. The reach trajectory prediction model developed in this study was found to accurately simulate human arm reach trajectory and the model will help understand the human arm reach movement.

• 로봇학회논문지
• /
• 제14권1호
• /
• pp.58-64
• /
• 2019

The paper proposes a stiffness measurement device composed of a measurement part including six indenters and a fixing part including four fixtures. The device is able to make simultaneously measurements of the stiffness of human arm. The six indenters make use of both position and force control schemes sequentially whenever needed. In addition, the loadcells and the digital encoders are attached to the indenters and electric motors, respectively, so that the data can be provided in real time. On the end of the indenter, two-axis potentiometer is attached in order to measure the angle difference between the applied force axis and the axis normal to the skin of human arm, and to convert the force measured on the loadcell into the actual applied force to skin. For this purpose, the mapping between the voltage output and the angle of potentiometer was obtained by fitting it for each axis. Ultimately, the measurement device was able to measure the stiffnesses of six regions of human arm.

• 대한가정학회지
• /
• 제19권3호
• /
• pp.21-32
• /
• 1981

Clothing must have the individual beauty and the function that one can do one's body movement freely. therefore, from the human engineering view point, the exact measurement of the human body and the analysis of it's results must be applied to clothing because the arm works most. In this study, the skin surface of arm was investigated by shell made of Alginate of each movement. And by sometic method the rate of expansion and contraction of each section, inter-relation among the bust girth, axillary arm girth and scye girth and between the shoulder length right and the under axilla waist length were calculate4d. With these results, cap height, breadth of a sleeve and arm hole girth of existing sleeve pattern have been compared and analysed. The results are as follows; 1) According to the developmental figures of shell, the whole area change was small but that of shape was remarkable in M 4, 9, 13. The change of the Block 1 was particular. 2) Over arm length was contracted in all movements except M6 and under arm length expanded. The changes of sections a, b, c are large, while those of sections d, e are small. 3) In terms of latitudes, change of fore-arm region was small. The rate of scye girth varied from 14.3% of M13 to-5.6% of M2. The breadth of a sleeve expanded in all movements, and especially the front region expanded more than the back. 4) The relation between the shoulder length right and under axilla waist length, in all occasions, was contracted mutually, and one contracted, the other expanded. Therefore, in clothing construction when we consider the function of the arm it is better to widen the arm hole and the breadth of a sleeve at the same time than no widen the shoulder length by lowering the upper part of the upper side seam line.

• 대한인간공학회지
• /
• 제18권3호
• /
• pp.141-152
• /
• 1999

In this paper, We performed the human body dynamic modelling for the realistic animation based on the dynamical behavior of human body, and designed controller for the effective control of complicate human dynamic model. The human body was simplified as a rigid body which consists of 18 actuated degrees of freedom for the real time computation. Complex human kinematic mechanism was regarded as a composition of 6 serial kinematic chains : left arm, right arm, support leg, free leg, body, and head. Based on the this kinematic analysis, dynamic model of human body was determined using Newton-Euler formulation recursively. The balance controller was designed in order to control the nonlinear dynamics model of human body. The effectiveness of designed controller was examined by the graphical simulation of human walking motion. The simulation results were compared with the model base control results. And it was demonstrated that, the balance controller showed better performance in mimicking the dynamic motion of human walking.

• 한국지능시스템학회논문지
• /
• 제25권3호
• /
• pp.223-228
• /
• 2015

본 논문에서는 어떤 물체를 들어 올려서 전달하는 인간의 작업을 대신 수행하기 위한 인간형 로봇 팔의 어깨 및 팔꿈치 관절의 토오크 특성을 분석하고자 한다. 이러한 목적을 달성하기 위하여 인간의 일상적인 물체의 리프팅 행동을 고려하고, 단순한 구조의 어깨와 팔꿈치 관절을 갖는 인간형 로봇 팔 모델을 사용하여 어떤 물체를 다양한 경로로 이송하는 시뮬레이션을 수행한다. 이러한 시뮬레이션을 통하여 인간형 로봇 팔을 이용한 물체의 이송 작업에 있어서 요구되는 어깨 및 팔꿈치 관절의 토오크 패턴 및 범위를 사전에 파악할 수 있음을 보인다. 결과적으로, 이러한 어깨 및 팔꿈치 관절의 토오크 분석은 효과적인 로봇 팔 메커니즘 설계에 유용하게 활용될 수 있다.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.59-65
• /
• 2012

In this research, a novel mater arm was studied as a teaching device for an underwater revolute robot arm used as a slave arm. The master arm was designed to be a seven-degree-of-freedom (DOF) structure, with a structure similar to that of the slave arm, and to be desktop size to allow it to be worn on a human arm. The master arm with encoders on the joints was used as an input device for teaching a slave robot arm. In addition, small electric magnets were installed at the joints of the master arm to generate the haptic force. A control system was designed to sense excessive force and torque in the joints of the master arm and protect it by controlling the position and velocity of the slave arm through the encoder signal of the master arm.

• 대한전기학회논문지
• /
• 제41권9호
• /
• pp.1051-1059
• /
• 1992

In this paper, two general methods using time-series analysis in the functional separation of the myoelectric signal of human arm movements are developed. Autocorrelation, covariance method and sequential least squares algorithm were used to determine the model parameters and the order of signal model to describe six arm movement patterns` the forearm flexion and extension, the wrist pronation and supination, rotation-in and rotation-out. The confidence interval to classify the functions of arm movement was defined by the mean and standard deviation of total squared error. With the error signals of autoregressive(AR) model, the result showed that the highest success rate was obtained in the case of 4th order, and success rate was decreased with increase of order. Autocorrelation was the method of choice for better success rate. This technique might be applied to biomedical and rehabilitation engineering.

• 전자공학회논문지B
• /
• 제30B권4호
• /
• pp.76-84
• /
• 1993

In this thesis, general method using autoregressive model in the functional separation of the myoelectric signal of human arm movements are suggested. Covariance method and sequential least squares algorithm were used to determine the model parameters and the order of signal model to describe six arm movement patterns` the forearm flexion and extension, the wrist pronation and supination, rotation-in and rotation out. The confidence interval to classify the functions of arm movement was defined by the mean and standard deviation of total squares error. With the error signals of autoregressive(AR) model, the result showed that the highest success, rate was abtained in the case of 4th order, and success rate was decreased with increase of order. This technique might be applied to biomedical-and rehabilitation-engi-neering.

• 대한인간공학회지
• /
• 제18권3호
• /
• pp.179-186
• /
• 1999

This article aims to provide information necessary for the measurement and analysis of human vibration, especially hand-arm vibration. The major health problems associated with the use of powered hand tools are the signs and symptoms of peripheral vascular and peripheral neural disorders of the fingers and hands. To prevent these problems, it is the first and the most important to measure the amount of the vibration transmitted to the upper extremities, and analyze its characteristics against the exposure limits such as ISO standards. In our country, however, very few studies have been done on the hand-arm vibration. One of the possible reasons might be lack of knowledge for the measurement and analysis schemes. The information introduced in this article would hopefully be of help for the upcoming studies.