• Tribology and Lubricants
• /
• v.38 no.5
• /
• pp.205-212
• /
• 2022

This paper presents experimental measurements of the structural characteristics of a two-pad beam-type gas foil journal bearing and its rotordynamic performance for a high-speed motor-driven turbocompressor. The test bearing had two top foils and two beam foils, each with an arc length of ~180°. Each beam foil was etched to obtain 40 beams with six geometries of different lengths and widths. The insertion of beam foils into the bearing housing produces equivalent beam heights. The structural tests of the bearing with a non-rotating journal revealed a smaller bearing clearance and larger structural stiffness for the load-on-pad configuration than for the load-between-pads configuration. Rotordynamic performance measurements during driving tests up to 100 krpm demonstrated synchronous vibrations and subsynchronous vibrations with large amplitudes. The test was repeated after inserting the shim between the top foil and beam foil to reduce the bearing radial clearance. The reduced bearing clearance resulted in a reduction in the peak amplitude of the synchronous vibrations and an increase in the speed at which the peak amplitude occurred. In addition, the onset speed and amplitude of the subsynchronous vibrations were dramatically increased and diminished, respectively. The rotor coast-down tests at 100 krpm show that the reduction in the bearing clearance extends the time to rotor stop, thus implying an improvement in hydrodynamic pressure generation and a reduction in bearing frictional torque.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1388-1395
• /
• 2009

In March 2007, Korea's Ministry of Construction & Transportation (MOCT) established "Guidelines on the Computerization and Use of Geotechnical Investigation Results," which took effect as official instructions. The 2007 Geotechnical Information DB Construction Project is underway as a model project for a stable geotechnical information distribution system based on the MOCT guidelines, accompanied by user education on the geotechnical data distribution system. This study introduces a geotechnical data entry system characterized by the standardization of the geotechnical investigation form, the standardization of metadata for creating the geotechnical data to be distributed, and the creation of borehole space data based on the world geodetic system according to the changes in the national coordinate system, to define a unified DB structure and the items for the geotechnical data entry system and to computerize the field geotechnical investigation results using the MOCT guidelines. In addition, the present operating status of the geotechnical data entry system and entry data processing statistics are introduced through an analysis of the model project, and the problems of the project are analyzed to suggest improvements. Education on, and the implementation of, the model project for the geotechnical data entry system, which was developed via the standardization of the geotechnical investigation results form and the metadata for institutions showed that most users can use the system easily. There were problems, however, including those related to the complexity of metadata creation, partial errors in moving to the borehole data window, partial recognition errors in the installation program for different computer operating systems, etc. Especially, the individual standard form usage and the specificity of the person who enters the geotechnical information for the Korea National Housing Corporation, among the institutions under MOCT, required partial improvement of the geotechnical data entry system. The problems surfaced from this study will be promptly addressed in the operation and management of the geotechnical data DB center in 2008.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.10
• /
• pp.5-15
• /
• 2008

The purpose of this study is to examine the validity of recycled aggregates (RAs) as a substitute for Sand-Mat material for soft ground improvement in the housing site development. To evaluate the possibility of RAs as a substitute for sand mat material, first of all, the criteria and regulations related with the quality of lateral drain layer were collected and checked. Secondly, both of the properties of RAs were compared with the properties of natural sand for the lateral drain layer. The material properties related to coefficient of permeability, pressure at-rest state and so on satisfied most standards. On the basis of the test results, RAs were used to the construction site as lateral drain layer. Accordingly, if the quality of RAs can be managed well, the application of these RAs as lateral drain layer to replace natural sand was highly effective. Also, based on cost analysis of two materials, RAs are proved to be very competitive.

• Design Convergence Study
• /
• v.15 no.2
• /
• pp.237-250
• /
• 2016

Along with rapid development, progress of the network technology and digital information technology, human are stepping into the intelligent society of internet. Thereby the quality of living environment and working environment are keep improving. Under the big background of internet era, the timeliness and convenience of smart home system has been improved greatly. While lots of smart products have gradually penetrated into people's daily life. The household appliances are among most popular ones. This paper is intended to compare smart features of household living products among most representative brands in China, Japan and South Korea. The smart features include self-learning, self-adapting, self-coordinating, self-diagnosing, self-inferring, self-organizing, and self adjusting. As result, most smart features of these products showed great similarity. While some features were dominated according to countries such as remote control feature in Korea, energy saving feature in Japan, and one button operation feature in China.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1908-1918
• /
• 2022

Recently, ASEAN is not only a new production base but also a consumer market for Korea, and interest in the utilization of production networks in each region is increasing. In particular, urbanization in ASEAN countries is progressing at a relatively fast pace. Each country is promoting smart city projects combined with ICT to improve outdated basic infrastructure facilities such as housing, transportation, logistics, crime prevention, and disaster prevention. The purpose of this study is to develop a web-based smart city export HUB platform so that companies with excellent domestic smart city solutions can participate in smart city construction through networks with ASEAN countries. These platforms can secure the demand for smart city construction in ASEAN countries, and through the establishment of the Korea-ASEAN public-private network, smart cities planned in ASEAN countries can be promoted more innovative. In addition, it is expected to be positioned as a Global smart city platform model by applying to real cities through collaboration with excellent domestic companies.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.5
• /
• pp.283-293
• /
• 2023

With the steady increase in the annual number of earthquakes in South Korea, the need to apply seismic reinforcement on public facilities has recently increased. To reinforce seismic capacity, spaced full-column-height steel bars are attached to column faces. In this study, nonlinear finite element analysis was conducted to analyze the effect of external reinforcement steel bars on the seismic capacity of RC columns with a square or rectangular cross-section. For verification, the analysis results were compared with test results. Results showed that the finite element analysis reasonably predicted the actual structural behavior of RC columns with steel bars. In addition, both the analysis and the test results showed that the failure mode was converted from brittle failure to ductile fracture, owing to the external reinforcement steel bars. Both loading capacity and ductility were increased as well. Therefore, the external reinforcement steel bar can effectively enhance the seismic capacity of existing RC columns. This study is expected to contribute to relevant research areas such as the development of design methods.

• Structural Monitoring and Maintenance
• /
• v.10 no.3
• /
• pp.207-220
• /
• 2023

The safety of bridges are critical in our transportation infrastructure. Bridge design and analysis require complex structural analysis procedures to ensure their safety and stability. One common method is to calculate the maximum moment in the girders to determine the appropriate bridge section. Girder distribution factors (GDFs) provide a simpler approach for performing this analysis. A GDF is a ratio between the response of a single girder and the total response of all girders in the bridge. This paper explores the significance of GDFs in bridge analysis and design, including their importance in the evaluation of existing bridges. We utilized Bridge Weigh-in-motion (B-WIM) measurements of five simple supported girder bridge in Indonesia to develop a simple GDF provisions for the Indonesia's bridge design code. The B-WIM measurements enable us to know each girder strain as a response due to vehicle loading as the vehicle passes the bridge. The calculated GDF obtained from the B-WIM measurements were compared with the code-specified GDF and the American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) bridge design specification. Our study found that the code specified GDF was adequate or conservative compared to the GDF obtained from the B-WIM measurements. The proposed GDF equation correlates well with the AASHTO LRFD bridge design specification. Developing appropriate provisions for GDFs in Indonesian bridge design codes can provides a practical solution for designing girder bridges in Indonesia, ensuring safety while allowing for easier calculations and assessments based on B-WIM measurements.

• Human Ecology Research
• /
• v.62 no.1
• /
• pp.15-32
• /
• 2024

The purpose of this study was to analyze the research trends and co-author networks of academic articles published in the Journal of the Korean Home Economics Association from 2010 to 2022. The network analysis was conducted using Excel and NetMiner 4.4, and the results were as follows. First, the number of published articles has been maintained at around 40 per year since 2019. By field, most articles were published in the field of child studies and family studies, followed by consumer studies, home management, clothing studies, home economics education, food and nutrition, and housing. The research methods were primarily quantitative (71.61%). Second, the most common keywords in the titles of the published articles were "influence" and "relationship", with "influence", "consumer", "mediating effect", "parent", and "control" identified as influential keywords. Third, the published articles were categorized into nine topics based on subject matter, while the number of topic types varied by year. Fourth, the total number of authors of the 627 articles was 712, with 1.92 authors per article, as well as the number of authors who published two or fewer articles accounted for 85.5% of the total. By institution, Yonsei University had the highest number of authors and the highest number of published articles, while Korea National Open University played a leading role in the network of co-authors by institution. This study is significant in providing basic data for the future development of the Korean Home Economics Association and the field of home economics.

• Asia pacific journal of information systems
• /
• v.29 no.2
• /
• pp.308-327
• /
• 2019

The concept of sharing economy has received rich attention in recent years. As a typical type of business model in the sharing economy, online short rent has been paid attention by both industry and academia. In this study, we find trust to be a critical determinant to the success of online short rent platforms. Based on three dimensions of trust theory, i.e., ability, benevolence and integrity, we investigate the factors influencing tenant' willingness to participate in online short rent. We further examine the extent to which trust can influence the number of sales and comments of rooms listed at online short-term rent platforms, which can represent tenant' willingness to participate in the sharing economy. The results show that the trust dimensions represented by a landlord's personal characteristics have significant positive correlations with the number of sales and comments. For example, the real name authentication and the sesame score can represent the trust integrity; online replay ratio and the average confirmation time representing the trust sincerity, and the order acceptance ratio representing the trust ability. On this basis, we proposed some recommendations for both platforms and landlords. For example, the landlords can improve the tenants' trust by authenticating his/her real name, replying actively and timely. For platforms, when they make housing list ranking rules, they can take the landlord's personal attributes that may affect trust into consideration. Moreover, platforms can also allow landlords to supply value-added services to improve service quality and ultimately promote the virtuous circle of the platform ecosphere. Through conducting the empirical research on a particular application of the sharing economy, we aim to fill the research gap of this field in China and provide theoretical and practical contributions to the future development of online short rent.

• Journal of the Korean Institute of Rural Architecture
• /
• v.26 no.2
• /
• pp.47-56
• /
• 2024

Through an examination of future societal development, it was found that the demographic structure is gradually aging, thus placing higher demands on elderly welfare centers. This study conducted surveys on three elderly day care centers in the entire region, aiming to enhance the pivotal role of elderly day care centers in the welfare facilities for the elderly. The current usage status, interior architectu/ral evaluations, and questionnaire surveys of these centers were analysed. The results of investigation into the architectural environment of the elderly day care centers showed that in terms of physical environment, smaller-scale centers did not lag behind larger ones in internal facilities, but larger-scale centers excelled in spatial utilization. Furthermore, the results of questionnaire survey results revealed correlations between family relationships, health status, level of assistance required, and satisfaction with facility usage, while no correlation was found between usage time, health status, and satisfaction with facility usage. This study conducted basic investigations such as architectural and physical surveys, and questionnaire surveys on elderly day care centers. Based on the survey results, future design practices should continuously explore and innovate to meet the needs of an aging society, further improve the community care system, provide more comprehensive and meticulous services for the elderly, and lay the foundation for enhancing the quality of life for the elderly and providing comfortable services.