• Journal of The Korea Institute of Healthcare Architecture
• /
• v.22 no.4
• /
• pp.29-36
• /
• 2016

Purpose: Considering the proportion of the population such as the elderly, pregnant women, infants companion and constantly increasing foreign tourists, there is a high need for implementing an environment without barriers. In terms of policy and institutional aspects, Jeju Special Self-Governing Province is striving to create an environment without barriers and to promote the safety and convenience of Vulnerable Pedestrians. But it is not enough to create a viable barrier-free environment. Methods: Method of this research is to analyze the general population status and installed facilities status for the disabled in Jeju. And analysis of policy research needs and level of barrier-free. By applying the barrier-free environment certification standards should conduct an assessment of the level of the current public office buildings in Jeju. It presents the environmental improvement of public office buildings for barrier-free environment. Result: Barrier-free environment status of the five public office buildings research surveyed all buildings have shown low levels of installed facilities for the disabled. In particular, it was analyzed that represents a very low level in the intermediate facilities and other facilities. The development of a specific installation manual for the facilities for the disabled is required to improve public office buildings. And barrier-free criteria need to reflect on the implementation of regulations. Implications: Through continuous research to analyze the barrier-free level and problems of public office buildings, it will be made to improve the comprehensive and reasonable alternative.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.513-520
• /
• 2018

Since Paris Climate Change Conference in 2015, many policies to reduce the emission of greenhouse gas have been accelerating, which are mainly related to renewable energy resources and micro-grid. Presently, the technology development and demonstration projects are mostly focused on diversifying the power resources by adding wind turbine, photo-voltaic and battery storage system in the island-type small micro-grid. It is expected that the large-scaled micro-grid projects based on the regional district and town/complex city, e.g. the block type micro-grid project in Daegu national industrial complex will proceed in the near future. In this case, the economic cost or the carbon emission can be optimized by the efficient operation of energy mix and the appropriate construction of electric and heat supplying facilities such as cogeneration, renewable energy resources, BESS, thermal storage and the existing heat and electricity supplying networks. However, when planning a large residential town or city, the concrete plan of the energy infrastructure has not been established until the construction plan stage and provided by the individual energy suppliers of water, heat, electricity and gas. So, it is difficult to build the efficient energy portfolio considering the characteristics of town or city. This paper introduces an energy mix optimization(EMO) method to determine the optimal capacity of thermal and electric resources which can be applied in the design stage of the real large-scaled residential town or city, and examines the feasibility of the proposed method by applying the real heat and electricity demand data of large-scale residential towns with thousands of households and by comparing the result of HOMER simulation developed by National Renewable Energy Laboratory(NREL).

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.226-231
• /
• 1999

Pyroelectric infrared sensors have been fabricated using P(VDF/TrFE) film with pyroelectric effect. The weight percent and thickness of the poled P(VDF/TrFE) film are 75/25 percent and $25\;{\mu}m$ respectively. For easier fabrication and connection method new top and bottom electrodes design was adapted for human body detecting pyroelectric infrared sensor. An aluminum infrared absorption electrode and bottom electrode were deposited by thermal evaporator. And the device was mounted in TO-5 housing to detect infrared light of $5.5{\sim}14\;{\mu}m$ wavelength. The responsibility, NEP (noise equivalent power) and specific detectivity $D^*$ of the device were $9.62{\times}10^5\;V/W$, $3.95{\times}10^{-7}\;W$ and $5.06{\times}10^5\;cm/W$ under emission energy of $13\;{\mu}W/cm^2$ respectively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.27-34
• /
• 2020

Human access is restricted to environment where radiation sources are used, however observation equipment should be radiation-resistant as it is exposed. Therefore, if tungsten with the highest specific gravity and melting point and the lowest lead were selected to reduce the dose to the Cobalt 60 radiation source to 1/8, Tu had a volume of 432.6cm3, a thickness of 2.4cm, and Pb had a volume of 961cm3,, a thickness of 3.6cm. By applying this method, produced a radiation resistant CMOS camera with a camera module using a CMOS Image sensor and a radiation shielding structured housing. As a result of applying the head detachable 2M AHD camera (No. ①) that survived the experiment to select the optimal shielding thickness, when shielding the associated equipment such as cameras, adapters, etc. is achieved, it was confirmed that the design of the structure is appropriate by operating well at doses higher than 1.88×106rad. Therefore, it is expected to secure the camera technology and business feasibility that can be applied to high radiation environments.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.4
• /
• pp.331-335
• /
• 2020

In this study, through the accumulated technologies such as real-time monitoring of power consumption using power line communication (PLC) method, power control, and automatic blocking of standby power, to commercialize them, we developed the hardware design, algorithm, protocol and module along with data transmission using PLC. We conducted the study to develop advanced products. We also proposed cloud-based smart outlet products with a novel type of outlet. These products can measure the internal power consumption through the H/W modules and the modules that control the power of household appliances connected to the smart outlets and smart plugs. Subsequently, they transmit the measurements to the energy saving system server via a communication module. This system can control the terminal device connected to the Gateway (G/W) server through a mobile phone. This will allow the customer to check the power consumption of the building at any given time, to turn the terminal on/off, and to maximize the energy efficiency during the construction of new apartments or multi-family housing in an area.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.2
• /
• pp.67-75
• /
• 2016

This Research was carried out to investigate landscape characteristics of the traditional Chinese village through the landscape analysis. The Purpose of this study was to offer suggestions for improving Korea's traditional village scenery. This research was conducted by analysis about an important component of the landscape in Ping-shan traditional village. It was studied natural landscape, life landscapes, agricultural production landscapes and symbols landscape. This study was carried out through literature research, field research and interviews. The results of Chinese traditional village's landscape characteristic was First, Ping-shan traditional village was located on the basis of Feng-Shui settings. Second, Ping-shan traditional village was clan-based. Third, It is composed of a large green space on the outskirts of the village. Fourth, Ping-shan traditional village was a typical channel village. Fifth, Ping-shan traditional village was a living landscape with various features. sixth, Ping-shan traditional village was a lot of space to agricultural production, most of the arable land surround village. Suggestions for improving Korea's traditional village scenery are as follows ; First, proposes actively re-design on the base of defense fengshi landscape interpreted as a modern sense. Seconds, when large-scale farmland project is established in Korea, you can expect to gain knowledge from traditional Chinese village spacing. Thirds, It seems to require a study of the public space for festival. in the case of china, ancestral shrine space is center and space for festival. Fourth, It was important to seek knowledge about protection for frequent in flood plains in Korea's traditional village. Ping-shan traditional village was well-known for housing with contact water, connected channels and beautiful defense pond. Fifth, for improving Korea's traditional village scenery, we need to make various focus landscape features. Most of the visitors to Ping-shan traditional village was interested in the big and small beautiful landscapes and shelters.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.755-764
• /
• 2020

Due to pronounced mechanical performance and being environmental friendly, aqueous polymer isocyanate adhesive (API) has been widely applied in the production of formaldehyde-free wood products. In this study, flame retardant formaldehyde-free plywood was prepared by incorporation of flame retardants into the API adhesive. Partially phosphorylated poly (vinyl alcohol) (PPVA) which was prepared by reacting poly (vinyl alcohol) with phosphoric acid was used to replace PVA in API formula. In addition, Mg-Al layered double hydroxides (LDH) was chosen as additive flame retardant, replacing traditional filler CaCO₃ in API adhesive formula. And then, the flame retardant API adhesive with main agent (PPVA replacing PVA70wt.%, SBR emulsion 30wt.%), curing agent 10wt.% (accounts for of the main agent), and 20wt.% LDHs (accounts of the main agent) was used to prepare flame retardant plywood. The effect of application of PPVA and Mg-Al LDH on bonding strength of plywood was investigated. The flammability characteristics of the plywood were determined by cone calorimeter test (CCT). The results revealed that compared with the plywood prepared with API adhesive, the use of PPVA and LDH enhanced the flame retardancy of plywood without negatively affecting bonding strength. The CCT tests indicated that the heat release and smoke production flame retardant API plywood were lower than those of the ordinary API glued plywood. Promising developments for flame retardant API adhesive were expected in future applications of flame retardant formaldehyde-free plywood.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.43-58
• /
• 2015

Compulsive hoarding becomes a problem when the spaces hoarded items are stored in become unusable due to clutter, health, or safety issues. Our research purpose was to document relationships between two non-normative consumer behaviors (compulsive hoarding, compulsive buying tendency) and two shopping-related variables: hedonic shopping motives and emotional attachment to possessions with everyday consumers. As hedonic shopping motives have been related to compulsive buying, we predicted these motives (e.g., adventure, gratification, role, value, social, and idea) are related to compulsive buying. We also examined the relationship between compulsive buying and compulsive hoarding tendency and whether emotional attachment to possessions moderated this relationship. Participants were 280 undergraduate and graduate students attending a Midwestern university in the U.S. Regression analysis revealed the enhancing emotion motive (a combined motive of adventure and gratification) positively influenced compulsive buying whereas the value motive negatively influenced compulsive buying. All other hedonic shopping motives were non-significant. Participants who tended to buy compulsively were likely to hoard compulsively. This relationship, however, was moderated by participants' emotional attachment to possessions. Participants with high emotional attachment to possessions showed a higher level of hoarding behavior than those with low emotional attachment to possessions. However, the increase in hoarding tendency among participants with low emotional attachment to possessions was larger between those who were low in compulsive buying and those who were high in compulsive buying than the increase between these two groups among participants with high emotional attachment to possessions.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.43-48
• /
• 2012

This study was investigated on the properties of board made from Miscanthus sinensis var. purpurascens particles differed in density of board and mixed ratio of powder type- and liquid type-phenolic resin. As the board density increase, thickness swelling and bending strength increased while water absorption decreased. With increasing the resin content, water absorption and thickness swelling decreased while MOR and internal bond strength increased. The board made of liquid type phenol-formaldehyde resin was low in water absorption and thickness swelling, and there were similar bending strengths between power type- and liquid type-phenol resin in resin cont of 11% and 13% at the board density $0.4g/cm^3$ and internal bond strength was higher with liquid type-phenolic resin in its bending strength.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.437-451
• /
• 2019

Purpose: The purpose of this study is to improve the quality of the PGM system by improving the structure and production process of slip-ring rotary joint for radar. Methods: The improvement measures for each cause are established through failure analysis of broken items. Specifically, changing in the housing to improve the heating system. Changing the transportation method to prevent damage to equipment during transport. Changing work process of the attenuator ring to prevent damage. etc. Results: The results of this study are as follows; improving the heating system reduces heat generated by the attenuator by about 7 degrees and obtain additional temperature margins. Reduction of defect rate because of adding X-band rotary joint run-out measurement test, ESS of slip-ring rotary joint and Transportation improvement(reinforced flight boxes, tube protection, etc). Getting stable VSWR values by improving work process of attenuator overheating due to a bad bonding process. Conclusion: Through this study, improvements were made to slip-ring rotary joint that failed repeatedly for various reasons. As a result of the application of the improvements, the same fault does not occur until now, so we can see that the quality of PGM has improved.