• Journal of the Korean Solar Energy Society
• /
• v.22 no.4
• /
• pp.62-67
• /
• 2002

Energy conversion soda-lime-silica glasses doped with Eu3+ were produced and they were used to build small scale modules of $100\times100cm$ simulating the roof of glass house with which the rearing state of a small number of young and grown vegetables was observed. The vegetables selected for the study were eggplant, kale, and pimento. The width and length of their leaves along with the photosynthesized ability and chlorophyl content were measured to observe the growing state of the vegetables in the given periods of time. It was found that the vegetables grown under the photo-conversion glass made panels had higher values of the leaf width and length by 5 to 30% than them under the commercially available ordinary glass panels depending on the kind of vegetables. The photosynthesized abilities were also shown much higher for the vegetables under the conversion glass panels than for the non-conversion ones.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.821-842
• /
• 2018

Purpose: To derive key requirements and key technologies for weapon system acquisition business by using Qualify Function Deployment (QFD), and to reduce business cost by setting the target performance and key expense of weapon system. Methods: We propose a QFD methodology that can induce rational decision-making by translating analyst's subjective opinions into quantitative values when analyzing requirements at the initial stage of weapon system development project. Based on QFD methodology, QFD application model combining house of quality, value engineering, and analogy cost estimating technique is presented. Results: It was possible to analyze the specific requirements necessary for the development of the weapon system, to solve the communication problem of the participants, to set clear development direction and target. Conclusion: By applying the QFD application model at the early stage of the weapon system acquisition project, it is possible to reduce the business cost by establishing clear development direction and goal through the procedural analysis process.

• Journal of Animal Science and Technology
• /
• v.63 no.4
• /
• pp.892-903
• /
• 2021

The objective of this study is to investigate effect of air cleaner operated during pig breeding period on stress hormones of pigs and their pork quality. The stress hormones (cortisol, epinephrine and norepinephrine) in blood sample of pigs reared in the housing rooms with or without air cleaner have been measured according to a pig's rearing stage: 0 day (farrowing), 21st day (farrowing-weaning), 70th day (weaning-nursery), 140th day (nursery-growing), and 180th day (growing-fattening). The comparison of pork quality according to the application of an air cleaner was performed through the carcass analysis of the pigs shipped from swine house. The levels of cortisol, epinephrine, and norepinephrine in pigs reared in housing rooms with and without air cleaners were found to be within the range of normal reference values. Among pork quality evaluation items, the thickness of intermuscular fat and final carcass grade of pigs raised in housing room with air cleaner was generally superior to those of pigs raised in housing room without air cleaner (p < 0.05). Based on the results obtained from this study, it is concluded that air cleaner does not have a significant effect on reducing pig stress but contributes to improving pork quality in pig breeding.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.160-164
• /
• 2022

In this paper, through the development of a smart panel (LCD kiosk) controller, contents to develop a system that can be operate in a desired environment by operating the window control and ventilation facilities according to the automatic controller operation based on the set values such as temperature, humidity, sunlight, and rainfall. In particular, the MQTT protocol-based sensor module can be directly manufactured and applied at any time based on various communication and power sources such as wireless, wired, and PLC (power line communication) to obtain the desired data, as well as fire, power failure, and intrusion in the house. It is also a system that enables operation and monitoring from a remote location based on the cloud environment by connecting sensors. Kiosks are currently being used in many places, and the demand for them is on the rise, and an active influx of young people can be expected through environmental improvement. It is expected to increase interest and understanding for improvement.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.318-323
• /
• 2008

First aim of this study is to investigate consumer's actual value for environment related performance of house by using three different method, Ranking, Analytical Hierarchy Process (AHP) and Conjoint Analysis method. Second aim is to estimate consumers' monetary value about environment related factor through Marginal Willing to Pay(MWTP), and third aim is to find out the difference of values between the groups classified according to respondents' characteristics. A questionnaire survey was carried out in Seoul in order to clarify the preference and monetary value of four selected attributes. They are environmental performance, residents' health, home automation and increase of floor area. As a result, people showed high values in the order of health, environmental consideration, increase of floor area and home automation. Moreover, it was found out that MWTP for environmental performance and health are higher than market price. In addition, the group of high age and group of female showed high values for the reduction of $CO_2$ emission

• Journal of Environmental Health Sciences
• /
• v.33 no.5
• /
• pp.397-402
• /
• 2007

The present study was initiated to examine the measures of dietary intake of Fe, Cu and Zn. The food duplicate samples were collected in Busan and its neighboring area, from the 69 middle-aged women (healthy non-smoking, mostly house wives), who provided informed consent. The samples were wet ashed by being heated in the presence of mineral acids, and Fe, Cu, Zn in the wet-ashed samples were analyzed by inductively coupled plasma - atomic emission spectrometry(ICP-AES). Dietary intake of Fe, Cu and Zn were 10.4 mg/day in Fe, 1.2 mg/day in Cu, 7.4 mg/day as arithmetic mean. The values for dietary Fe and Zn were lower, and the values for dietary Cu were higher than the recommended daily intake from Korean Nutrition Society. Further studies of Korean foods are needed to clarify the representative values for daily dietary Fe, Cu and Zn intake in the Korean population.

• Korean Management Science Review
• /
• v.33 no.2
• /
• pp.75-87
• /
• 2016

Quality function deployment (QFD) is a widely adopted customer-oriented product development methodology by analyzing customer requirements. It is a main activity in QFD planning process to determine the optimal values of the technical attributes (TAs) so as to achieve the customer requirements (CRs) from the House of Quality (HoQ). In most of the previous research, all the TAs in QFD are assumed to have either continuous or discrete values. In the real world applications, the continuous TAs and the discrete TAs are often mixed in QFD. In this paper, a mixed integer linear programming model is formulated to obtain the optimal values for the continuous TAs and the discrete TAs in QFD planning as well as Branch and Bound (B and B) algorithm is proposed as the solution approach. Finally, the proposed model and solution approach are illustrated with an office chair under multi-segment market, and the sensitivity analysis is performed to study how the proposed model and its solutions respond to the variation for the two elements which are budget and CRs' weights.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.3
• /
• pp.11-18
• /
• 2019

The purpose of this study was to estimate the resistance capacity of a traditional wooden house with shear walls made of wood panel. In order to achieve the purpose of the study, the load - displacement test was carried out and the resistance moment values of the shear walls were proposed. The shear walls were made by placing studs with a nominal dimension of $38mm{\times}89mm$ at intervals of 600 mm, and attaching 12 mm thick plywood with 8-d size pegs at intervals of 150 mm. The type of traditional building wall was classified and showed the moment resistance ability of each wall type. This value is expressed as a proportional value divided by the moment resisting capacity of the standard size shear walls not divided into the divided small frames. Although some frames have proportional values larger than 1.0 even though they have openings, most of them show values smaller than 1.0. Also, even without the openings, it showed a smaller value than 1, such as 0.84 and 0.67.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.4
• /
• pp.214-223
• /
• 2006

For better management of micronutrients in crop cultivation, the availability of micronutrients in the soils must be updated and evaluated as a first step. This study was conducted to investigate the distribution of micronutrients in soils of plastic film houses. Total 396 soil samples were collected from the plastic film houses of various crops in Yeongnam province (strawberry, 96; red pepper, 66; tomato, 74; oriental melon, 97; cucumber, 63). Total and available contents of B, Cu, Zn, Fe, and Mn in the soils were determined. Available B was extracted with hot water and available Cu, Zn, Fe, and Mn were extracted with 0.1 N HCl. Mean values of total contents of B, Cu, Zn, Fe, and Mn in the plastic film house soils were 25, 32, 74, 21,316, and $420mg\;kg^{-1}$, respectively. Total contents of micronutrients in the plastic film house soils were similar to those found in the open fields nearby, while they were different among the locations investigated. Mean contents extractable B, Cu, and Zn in the plastic film house soils were 2.1, 7.5, and $35mg\;kg^{-1}$, respectively. The contents of extractable B, Cu, and Zn in the plastic film house soils were higher than those found in the open fields nearby with exceptions of B in soils of strawberry and Cu in soils of red pepper and oriental melon. However, mean contents of extractable Fe and Mn in the plastic film house soils were 156 and $146mg\;kg^{-1}$, respectively, and the mean content of extractable Fe was much lower than that found in open fields nearby. The contents of extractable Zn, Fe, and Mn were higher than the sufficient levels for the crop requirements in most of the plastic film house soils investigated. Contents of extractable Cu in most soils of strawberry, tomato and cucumber cultivations were higher than the sufficient level. However, extractable Cu contents were below the sufficient level in about 30% of investigated soils of red pepper and oriental melon cultivation. Soils containing higher contents of extractable B than the sufficient level were relatively fewer in comparison to the other micronutrients.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.3
• /
• pp.1-19
• /
• 2007

1. Purpose Rural tourism is made by individuals with different characteristics, needs and wants. It is important to have information on the characteristics and preferences of the consumers of the different types of existing rural accommodation. The stud aims to identify the determinants of consumer preference by type of accommodations. 2. Methodology 2.1 Sample Data were collected from 1000 people by telephone survey with three-stage stratified random sampling in seven metropolitan areas in Korea. Respondents were chosen by sampling internal on telephone book published in 2006. We surveyed from four to ten-thirty 0'clock afternoon so as to systematic sampling considering respondents' life cycle. 2.2 Two-step cluster Analysis Our study is accomplished through the use of a two-step cluster method to classify the accommodation in a reduced number of groups, so that each group constitutes a type. This method had been suggested as appropriate in clustering large data sets with mixed attributes. The method is based on a distance measure that enables data with both continuous and categorical attributes to be clustered. This is derived from a probabilistic model in which the distance between two clusters in equivalent to the decrease in log-likelihood function as a result of merging. 2.3 Multinomial Logit Analysis The estimation of a Multionmial Logit model determines the characteristics of tourist who is most likely to opt for each type of accommodation. The Multinomial Logit model constitutes an appropriate framework to explore and explain choice process where the choice set consists of more than two alternatives. Due to its ease and quick estimation of parameters, the Multinomial Logit model has been used for many empirical studies of choice in tourism. 3. Findings The auto-clustering algorithm indicated that a five-cluster solution was the best model, because it minimized the BIC value and the change in them between adjacent numbers of clusters. The accommodation establishments can be classified into five types: Traditional House, Typical Farmhouse, Farmstay house for group Tour, Log Cabin for Family, and Log Cabin for Individuals. Group 1 (Traditional House) includes mainly the large accommodation establishments, i.e. those with ondoll style room providing meals and one shower room on family tourist, of original construction style house. Group 2 (Typical Farmhouse) encompasses accommodation establishments of Ondoll rooms and each bathroom providing meals. It includes, in other words, the tourist accommodations Known as "rural houses." Group 3 (Farmstay House for Group) has accommodation establishments of Ondoll rooms not providing meals and self cooking facilities, large room size over five persons. Group 4 (Log Cabin for Family) includes mainly the popular accommodation establishments, i.e. those with Ondoll style room with on shower room on family tourist, of western styled log house. While the accommodations in this group are not defined as regards type of construction, the group does include all the original Korean style construction, Finally, group 5 (Log Cabin for Individuals)includes those accommodations that are bedroom western styled wooden house with each bathroom. First Multinomial Logit model is estimated including all the explicative variables considered and taking accommodation group 2 as base alternative. The results show that the variables and the estimated values of the parameters for the model giving the probability of each of the five different types of accommodation available in rural tourism village in Korea, according to the socio-economic and trip related characteristics of the individuals. An initial observation of the analysis reveals that none of variables income, the number of journey, distance, and residential style of house is explicative in the choice of rural accommodation. The age and accompany variables are significant for accommodation establishment of group 1. The education and rural residential experience variables are significant for accommodation establishment of groups 4 and 5. The expenditure and marital status variables are significant for accommodation establishment of group 4. The gender and occupation variable are significant for accommodation establishment of group 3. The loyalty variable is significant for accommodation establishment of groups 3 and 4. The study indicates that significant differences exist among the individuals who choose each type of accommodation at a destination. From this investigation is evident that several profiles of tourists can be attracted by a rural destination according to the types of existing accommodations at this destination. Besides, the tourist profiles may be used as the basis for investment policy and promotion for each type of accommodation, making use in each case of the variables that indicate a greater likelihood of influencing the tourist choice of accommodation.