• 제목/요약/키워드: hot-plate test

검색결과 165건 처리시간 0.025초

핸디사이즈 운임지수 및 스팟용선료 변화에 영향을 미치는 요인 분석 (Factor Analysis Affecting on Changes in Handysize Freight Index and Spot Trip Charterage)

  • 이충호;김태우;박근식
    • 한국항만경제학회지
    • /
    • 제37권2호
    • /
    • pp.73-89
    • /
    • 2021
  • 핸디사이즈 벌크선 시장은 중대형 선박으로 운송이 불가능한 다양한 화물을 운송할 수 있으며, Spot용·대선 시장이 활성화 되어 있고 중대형 벌크선과 독립적인 성격의 시장으로 단기간에 변화하는 시황 및 용선료 변동성에 의한 위험이 보다 많은 시장이다. 본 연구에서는 부정기 벌크선 선형에서 핸디사이즈 운임지수(BHSI)와 Spot용선료에 영향을 미치는 요인들을 검정하고 요인들의 과거 값을 이용하여 종속변수의 동태적 반응을 파악 및 단기 예측을 위하여 벡터자기회귀모형(VAR)을 이용하여 분석을 하였다. 인과성 검정 결과 핸디사이즈의 주요 선적 화물인 원료탄, 일본후판, 열연강판의 가격과 선복량, 선박유가와 인과관계가 나타났으며, VAR모형의 적정시차와 안정성을 확인 후 충격반응함수와 예측오차분해분석을 실시하였다. 충격반응함수 분석 결과 원료탄 가격, 열연강판 가격, 선박유가 3가지 변수는 신뢰구간 상한과 하한이 모두 같은 구간으로 유의하다고 나타났으며, 열연강판 가격의 충격이 가장 유의한 영향을 미치는 것으로 확인되었다. 운임지수(BHSI)와 Spot용선료 두 종속변수 모두 거의 동일한 결과로 나타났으며 t시점에서 발생한 원료탄가격의 표준편차 1단위의 충격에 양(+)의 영향, 열연강판 가격의 충격에 양(+)의 영향, 선박유가의 충격에는 음(-)의 영향의 결과를 보였다. 예측오차 분산분해분석 결과 운임지수(BHSI)와 Spot용선료에 영향을 미치는 설명력은 열연강판 가격, 원료탄 가격, 선박유가, 일본후판 가격, 선복량 순으로 동일하게 나타났으며 열연강판 가격의 설명력은 3기부터 점차 상승하여 운임지수에는 30%, Spot용선료에는 26%까지 영향을 미친다고 나타났다. 기존 선행연구와 차별화하여 단기적인 시차 영향을 알아보기 위해 주요 선적화물의 월간 가격 데이터를 사용하여 분석을 수행하였으며, 월 단위 시황 예측이 가능한 유의미한 결과를 도출하였다. 이 연구가 핸디사이즈 선박을 운항하는 선사와 핸디사이즈 용·대선 시장 관계자들에게 단기적인 시황 예측에 도움이 될 수 있다는데 의의가 있다고 생각한다.

초음파 열화상 검사를 이용한 박판 용접시편의 결함 검출 (A Defect Detection of Thin Welded Plate using an Ultrasonic Infrared Imaging)

  • 조재완;정진만;최영수;정승호;정현규
    • 제어로봇시스템학회논문지
    • /
    • 제13권11호
    • /
    • pp.1060-1066
    • /
    • 2007
  • When a high-energy ultrasound propagates through a solid body that contains a crack or a delamination, the two faces of the defect do not ordinarily vibrate in unison, and dissipative phenomena such as friction, rubbing and clapping between the faces will convert some of the vibrational energy to heat. By combining this heating effect with infrared imaging, one can detect a subsurface defect in material efficiently. In this paper a detection of the welding defect of thin SUS 304 plates using the UIR (ultrasonic infrared imaging) technology is described. A low frequency (20kHz) ultrasonic transducer was used to infuse the welded thin SUS 304 plates with a short pulse of sound for 280ms. The ultrasonic source has a maximum power of 2kW. The surface temperature of the area under inspection is imaged by a thermal infrared camera that is coupled to a fast frame grabber in a computer. The hot spots, which are a small area around the defect tip and heated up highly, are observed. From the sequence of the thermosonic images, the location of defective or inhomogeneous regions in the welded thin SUS 304 plates can be detected easily.

원통형 수직 펌프의 공진회피를 위한 접수진동해석 (Fluid-Structure Interaction (FSI) Modal Analysis to Avoid Resonance of Cylinder Type Vertical Pump at Power Plant)

  • 이재환;왕즈텅;아코마링
    • 대한조선학회논문집
    • /
    • 제55권4호
    • /
    • pp.321-329
    • /
    • 2018
  • Resonance phenomena occurs at large vertical pump which is operating to cool down the hot steam using sea water in the power plant. To avoid the resonance, the natural frequency needs to be isolated about 20% from motor operating speed. Yet, excessive vibration occurs especially at low tide. At first, natural frequency of the whole pump system and each part is calculated using ANSYS. As it is revealed in the previous journal papers that only circular pipe part is related to resonance, the FSI technique is applied for free vibration analysis. The natural frequency is reduced to 60% (compared to that) of the frequency measured in air as it is similar to other published results. And the frequency obtained by finite element analysis is almost same to that obtained from modal test. Based on the accurate finite element model and analysis, design change is tried to avoid the resonance by changing the thickness of pipe and base supporting plate. In stead of doing optimization process, design sensitivity is computed and used to find such designs to avoid resonance.

Antinociceptive, Immunomodulatory and Antipyretic Activity of Nymphayol Isolated from Nymphaea stellata (Willd.) Flowers

  • Pandurangan, Subash-Babu;Paul, Antony Samy;Savarimuthu, Ignacimuthu;Ali, Alshatwi A
    • Biomolecules & Therapeutics
    • /
    • 제21권5호
    • /
    • pp.391-397
    • /
    • 2013
  • In the present study, we aimed to analyze the antinociceptive, immunomodulatory and antipyretic activities of nymphayol were investigated in wistar rats and mice. Antinociceptive effect was evaluated by acetic acid induced writhing, formalin induced paw licking and hot-plate tests. Immunomodulatory activity was assessed by neutrophil adhesion test, humoral response to sheep red blood cells, delayed-type hypersensitivity, phagocytic activity and cyclophosphamide induced myelosuppression. Antipyretic activity was evaluated by yeast induced hyperthermia in rats. Nymphayol produced significant (p<0.05) antinociceptive activity in acetic acid induced writhing response and late phase of the formalin induced paw licking response. Pre-treatment with nymphayol (50 mg/kg, oral) evoked a significant increase in neutrophil adhesion to nylon fibres. The augmentation of humoral immune response to sheep red blood cells by nymphayol (50 mg/kg) was evidenced by increase in antibody titres in rats. Oral administration of nymphayol (50 mg/kg) to rats potentiated the delayed-type hypersensitivity reaction induced by sheep red blood cells. Treatment with nymphayol showed a significant (p<0.05) reduction in pyrexia in rats. The results suggest that nymphayol possesses potent anti-nociceptive, immunomodulatory and antipyretic activities.

적외선 램프 가열방식을 이용한 태양전지 셀의 솔더링 공정 및 열처리 조건 별 특성 평가 (Characterization of Soldering Property on Heating Condition by Infrared Lamp Soldering Process for C-Si Photovoltaic Modules)

  • 손형진;이정진;김성현
    • Current Photovoltaic Research
    • /
    • 제4권2호
    • /
    • pp.59-63
    • /
    • 2016
  • A key point of a soldering process for photovoltaic (PV) modules is to increase an adhesive strength leading a low resistivity between ribbon and cell. In this study, we intended to optimize a heating condition for the soldering process and characterize the soldered joint via physical and chemical analysis methods. For the purpose, the heating conditions were adjusted by IR lamp power, heating time and hot plate temperature for preheating a cell. Since then the peel test for the ribbon and cell was conducted, consequently the peel strength data shows that there is some optimum soldering condition. In here, we observed that the peel strength was modified by increasing the heating condition. Such a soldering property is affected by a various factors of which the soldered joint, flux and bus bar of the cell are changed on the heating condition. Therefore, we tried to reveal causes determining the soldering property through analyzing the soldered interface.

하이드로포밍용 열연 강재의 레이저 용접성 및 성형 특성 (Laser Weldability and Formability of Hot Rolled Steels for Hydroforming Applications)

  • 이원범;이종봉
    • Journal of Welding and Joining
    • /
    • 제22권6호
    • /
    • pp.19-24
    • /
    • 2004
  • The laser welding and its analysis of thin-sheet carbon steels were carried out with high power $CO_{2}$ laser. The main factor of weld quality of laser welding is gap and edge quality. This work was preformed to focus on the gap tolerance problem during laser welding. First, bead on plate welding of thin sheet was examined to investigate the effect of laser welding variables, and to obtain optimum welding condition. Butt welding was also carried out to show the effect of gap on the laser weldability of thin sheet. In order to investigate the effect of gap on formability of welded thin sheet, LDH test was caried out. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too much heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about $80{\%}$ value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.

천이영역에서 난류에너지의 이동에 관한 실험적 연구 (An Experimental Study on the Transport of Turbulent Energy in the Transitional Boundary Layer)

  • 임효재;백성구;이원근
    • 에너지공학
    • /
    • 제12권2호
    • /
    • pp.131-138
    • /
    • 2003
  • 본 연구에서는 평판 경계층의 천이 영역에서 평균속도, 표면마찰계수, 간헐도 분포, 에너지 스펙트럼 등의 신뢰성 있는 실험 자료를 획득하였다. 실험 결과 천이가 진행됨에 따라 난류반점이 지배하는 영역이 벽면 근처에서 전 경계층으로 확산되었으며 이러한 현상의 결과로 속도 섭동량에서 비등방성이 크게 나타난다. 천이 이전영역에서는 에너지가 주로 저주파에 집중되어 있다가 천이를 거치면서 에너지가 고주파 성분으로 이동하였다 이는 두 가지 이상의 에너지 발생과 소멸 메커니즘이 천이영역에서 공존하고 있음을 의미한다. 따라서 천이영역에서의 유동장을 예측하기 위한 난류 계산 모형에서 비등방성과 서로 다른 메커니즘을 표현할 수 있기 위해서는 반드시 두 가지 이상의 척도를 표현할 수 있어야 한다.

Antinociceptive and anti-inflammatory activities of Pandanus fascicularis Lamk. leaves in animal models

  • Panda, Prabhudutta;Panda, DP;Panda, PK;Nayak, SS
    • Advances in Traditional Medicine
    • /
    • 제7권5호
    • /
    • pp.485-493
    • /
    • 2008
  • The present study was carried out to elucidate the potential of, chloroform extract of Pandanus (P.) fascicularis Lamk (Family-Pandanaceae) leaves on antinociceptive, behavioral study and anti-inflammatory effects using various animal models The dried, powdered leaves of, P. fascicularis were extracted successively with petroleum ether ($60\;-\;80^{\circ}C$) and chloroform in soxhlet apparatus. The chloroform extract (yield 21.6% w/w with respected to dry powdered plant material) was selected for all experimental procedure. Two models were employed to investigate the effects on nociception, the tail immersion and hot plate method in Swiss albino mice and anti inflammatory effect were investigated by employing the carrageenan induced rat paw edema test in. adult Wister albino rats. Behavioral study was investigated by elevated plus maze method in Swiss albino mice. Results were revealed that the PFCE was found significant antinociceptive effect (P < 0.001) at the dose levels of 100, 200 and 400 mg/kg, orally in mice and produced remarkable antiinflammatory effect (P < 0.001) at the same dose levels used in the rats. Behavioral study of the PFCE has no significant anxiolysis effect when used orally. It concludes that, PFCE possessed remarkable antinociceptive effect and anti-inflammatory effect but no anxiolytic effect on animal models.

생약복합제 GCSB-5의 급성통증 모델에서의 진통작용 (Evaluation of the Antinociceptive Properties of GCSB-5, a Herbal Formulation)

  • 이찬호;김성화;이준석;조강훈;김정섭;조순현;이선미
    • 생약학회지
    • /
    • 제36권4호통권143호
    • /
    • pp.299-304
    • /
    • 2005
  • This study examined the antinociceptive properties of GCSB-5, a herbal formulation consisting of 6 Oriental herbs (Ledebouriellae Radix, Achyranthis Radix, Acanthopanacis Cortex, Cibotii Rhizoma, Glycine Semen, and Eucommiae Cortex) that are used in traditional medicine to treat various bone disorders, mainly of which involve analgesic processes. Peripheral and central analgesic models were established in experimental animals in order to evaluate the antinociceptive effects of the agent. GCSB-5 significantly inhibited the number of acetic-induced writhing (33.3%-34.3% inhibition at 100-600 mg/kg) but increased the pain threshold (38.0% increase at 300 mg/kg) in the Randall-Selitto test. However, GCSB-5 had no effect on the hot plate-induced nociception and hyperalgesia from the tail-pinch method. These results suggest that the antinociceptive effect of GCSB-5 may be mediated via peripheral mechanisms.

Sulfuretin, an Antinociceptive and Antiinflammatory Flavonoid from Rhus verniciflua

  • Choi, Jong-Won;Yoon, Byung-Jae;Han, Yong-Nam;Lee, Sang-Kook;Lee, Kyung-Tae;Park, Hee-Juhn
    • Natural Product Sciences
    • /
    • 제9권2호
    • /
    • pp.97-101
    • /
    • 2003
  • This study was undertaken to evaluate the antinociceptive and antiinflammatory effects of the heartwood extract of Rhus verniciflua (Anacardiaceae) and the two major components, sulfuretin and fustin. The MeOH extract, its EtOAc-soluble portion and sulfuretin showed significant antinociceptive activity in writhing and hot plate test assays and antiinflammaory effects in carrageenan-induced hind paw edema in rats. In particular, treatment of sulfuretin with 10 mg/kg dose (i.p.) reduced writhing frequency by 48.0% (p<0.01) compared to that of a control group. Further, the treatment of sulfuretin (5, 10 mg/kg, i.p.) for 7 days prevented the carrageenan-induced hind paw edema significantly (p<0.01). The antiinflammatory effect of sulfuretin was also confirmed by microscopic observation of mast cell numbers in muscle. In addition, sulfuretin suppressed the cyclooxygenase- 2 (COX-2) activity $(IC_{50}\;=\;28.7\;{\mu}M)$ in lipopolysaccharide-activated macrophage cells. This result indicates that the inhibitory effect of sulfuretin on COX-2 may be one of the antinociceptive/antiinflammatory mechanism.