• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.626-634
• /
• 2017

This study investigated garment formability of the 73 breathable fabrics for sports-wear garment and their fabric mechanical properties were measured using KES-FB and FAST systems. Predicted garment formability from the mechanical properties measured using KES-FB and FAST systems was compared and discussed with fabric structural parameters. In addition, virtual 3D simulation silhouette by I-designer CAD system wear appearance by simulation using 3D CAD system. And compared with FAST finger chart by mechanical properties of FAST system. The correlation coefficients of extensibility and shear modulus between KES-FB and FAST systems were high, however, bending rigidity and compressibility showed relatively low correlation coefficients. The correlation coefficient of garment formability of breathable fabrics between KES-FB and FAST systems was 0.82. It revealed that garment formability can be predicted from fabric mechanical properties by KES-FB and FAST systems. The garment formability of nylon breathable fabric was higher than that of PET one, and the garment formability of laminated breathable fabric showed the highest value compared to coated, dot and hot melt laminated breathable fabrics. It revealed that garment formability of breathable fabrics for sports-wear can be predicted from fabric mechanical properties and garment formability was dependent on the materials, finishing method and fabric structural parameters.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.56-56
• /
• 2012

본 연구는 가정용 및 산업용 유해가스제거용 필터여재의 제조에 관한 것으로 핫멜트(hot-melt) 분사 시스템에 의한 다층구조의 부직포와 활성탄 등의 흡착물질로 구성되는 샌드위치 복합시트 및 필터여 재의 제조에 사용되는 구성재료의 최적화에 관한 연구이다. 스프레이 본딩 시스템에 의한 공정은 종래의 유해가스제거용 필터 미디어의 제조하는 방법인 활성탄과 바인더 역할을 하는 핫멜트 수지를 혼합하여 부직포 원단에 도포하여 활성탄을 부착시키는 공정에 비해 도포되는 핫멜트 수지의 양이 감소에 의한 생산비절감과 충분한 활성탄 도포에 의한 기능성 향상 등에 의해 유해가스 포집율을 높일 수 있으며 공정 이후 스프레이에 의해 도포된 핫멜트수지의 자연건조 방식에 의한, 열원이 불필요하며, 에너지가 절감되며, 속도 향상에 의한 생산성 향상, 분진발생 최소화로 인한 제조현장의 환경개선이 가능할 것으로 사료된다. 1차적으로 본 연구의 필터제조의 최적화를 위해서 스프레이 본딩시스템에 효율적으로 사용가능한 다양한 수지를 검토하였으며, 기존 외산 캐빈필터여재의 미세구조 및 성능특성, 다양한 활성탄의 흡착성능검토, 사용 가능한 여재의 특성분석을 통해 다층구조의 필터 여재에 사용 가능한 구성재료의 최적화에 중심을 두었다.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.90-97
• /
• 2018

Hydrophilic reactive hot-melt polyurethane adhesive(HRHA) using a hydrophilic polyol having different molecular weight and NCO index was synthesized. This HRHA was synthesized using Polyethylene glycol(PEG) as a hydrophilic polyol, Polypropylene glycol(PPG) and Polycaprolactone diol(PCL) as hydrophobic polyols, and Methylene diphenyl diisocyanate(MDI) as an isocyanate. The changes in IR spectrum, viscosity and thermal properties of HRHA with different PEG molecular weights and NCO index were investigated, and the tensile strength and elongation of the HRHA casting film and the peel strength, moisture permeability and water pressure of the HRHA coated fabric were confirmed. In this experiment, as the molecular weight of PEG and NCO index increased, the adhesive strength, tensile strength, elongation and moisture permeability was increased but viscosity and Tg was decreased.

• 접착 및 계면
• /
• 제7권3호
• /
• pp.26-33
• /
• 2006

나일론 직물들이 전류세기 5, 10, 15, 20 A, 공급속도 5, 10, 15 m/min로 코로나 처리되었다. 나일론 직물의 표면변화를 X-ray 회절장치, 주사전자현미경(SEM)과 X-ray 광전자분석기(ESCALAB)로 확인하였다. 또한 물리적 성질의 변화를 인장 인열강도, 접착 및 습윤강도를 통하여 측정하였다. 접착에 사용된 접착제는 열경화성 반응형 폴리우레탄 핫 멜트 접착제이다. 대기압에서 코로나 방전처리에 의해 나일론 직물에 관능기들이 도입되어졌고, 그 결과 접착력은 향상되었다. 코로나 처리된 나일론 직물의 접착강도는 전류 세기가 증가할수록, 공급속도가 감소할수록 증가하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 압출 및 인발 심포지엄
• /
• pp.38-46
• /
• 1999

Dispersion strengthened Cu alloys have been manufactured by spray forming and also by reactive spray forming, followed by hot extrusion of the spray deposited billets. The size of dispersed particles in the reactive spray formed alloy was much finer than that in the spray formed alloy. That was because the dominant chemical reaction between Ti and B had occurred in Cu-Ti-B alloy melt in spray forming while it had occurred after deposition of droplets in reactive spray forming. The yield strength of the reactive spray formed alloy was greater than that of the spray formed alloy. To understand the mechanism responsible for this observed strengthening, the yield strength of two Cu alloys were analyzed using the dislocation pile-up model and Orowan mechanism, which were fairly consistent with the experimental results. Increase in yield strength of reactive spray formed alloy relative to spray formed alloy was largely attributed to nano-scale TiB dispersoids.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.269-272
• /
• 2004

The present study used a diagrammatic analysis of 6 sigma quality control and Taguchi method for injection molding process of monitor back-cover, evaluated the influence on the cycle time with part design, mold design, molding process and standardization activity involving design & molding, adopted analysis of sensitivity and effective factors of the part design and molding process conditions for productivity, identified main design molding factors, as critical ones influencing on the quality and productivity, of which is summarized as design guidance. The main contribution factors for cycle time can be sequentially enumerated as follows; hot spot, part thickness, coolant inlet temperature, melt temperature cooling line layout, etc.. As a first step critical factors of the design process of current monitor housing were investigated. And the optimal and better critical factors found in the first step were applied to a new product proving our process was correct. Moldflow software was used for injection molding simulation, and Minitab software for the statistical analysis. Finally, the productivity was increased by about 33 percents for our specific case.

• 한국주조공학회지
• /
• 제13권3호
• /
• pp.238-247
• /
• 1993

Microstructure, hardness and wear characteristics of $SiC_p/Al-6.5wt%Si-1.7wt%Mg$ alloy composites fabricated by the method of rheo-compocasting and hot pressing are investigated in this study. The dispersion of SiC particles in the composites is homogeneous and the hardness improves as additional amount increases. The wear amount of the matrix metal increases highly as wear rates increase, for the wear mechanism changes from adhesive wear to melt wear, and the matrix metal was coated on the surface of revolving disc and its weight increases. In the 5vol% composites, Fe is adhered on the surface of specimen by the projection of the dispersed hard SiC particles which have net-work structure and the coating layer is about $300{\mu}m$. But in the composite more than 20vol%, the wear amount of composite decreases because the SiC particles which have superior hardness, wear resistance and heat resistance properties resist wear, the abrasive wear turn out predominant wear mechanism and so the wear amount of revolving disc increases.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제39차 학술발표회
• /
• pp.109-110
• /
• 2008

본 연구에서는 신축성이 우수한 친수형 무공 PET필름을 사용해서, 소취성, 보온성 및 투습방수성이 우수한 신발용 소재를 개발하였다. 이상의 목적을 달성하기 위해서 최적 소재의 선정, PET필름의 특성평가, 최적 라미네이팅 공정조건 확립, 첨가제 선정 및 가공조건 확립 등에 대해서 실험고찰을 하였으며, 얻어진 주요 결과는 다음과 같다. (1) 신발의 갑피용 및 안창용 최적소재로서 경편직물을 선정하였으며, PET필름의 최적 요구특성은 내수성 9460mmH2O, 투습성 10,000g/m2/24hrs, 인장강도42kgf/cm2, 신도249% 였다. (2) Hot-melt 라미네이팅 공정에서의 투습방수성을 좌우하는 Dot roll No, Coating gap의 최적조건은 CP75(Engraved dot roll no), -0.2mm(Coating Unit gap) 였다. (3) EVA base polymer 및 기타 조제의 최적 배합비를 확립하고 이를 바탕으로 compound를 제조하여 Press로 molding하여 안창용 Sponge를 얻었다. (4) 안창 sponge 위에 점착된 knit 소재의 소취효과는 우수하였으며, 갑피용 투습방수 경편직물의 보온성도$15{\sim}20%$로 우수하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.412-422
• /
• 1999

Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

• 한국수소및신에너지학회논문집
• /
• 제24권5호
• /
• pp.451-460
• /
• 2013

In a direct coal fuel cell (DCFC) system, it is essential to identify volume fraction of coal suspended in electrolyte melt in order to control its dispersion and fluidity. This requirement is compelling especially at anode channel where hot slurry is likely to flow at low velocity. In this study, light scattering techniques were employed to measure the volume fraction for a pulverized coal suspension with relatively high absorption coefficient. The particle size, scattering angle, and volume fraction were varied to evaluate their effects on the scattering behavior as well as scattering regime. The larger coal size and smaller forward scattering angle could provide a shift to more favorable scattering regime, i.e., independent scattering, where interferences of light scattering from one particle with others are suppressed.