• 한국자원식물학회지
• /
• 제31권4호
• /
• pp.283-293
• /
• 2018

본 연구는 생산과 수요가 늘고 있는 마디풀과 하수오의 최적 건조방법 구명을 통한 식품소재화 및 산업화를 목적으로 수행하였다. 하수오의 최적 건조방법을 구명하기 위해 열풍건조, 음건 및 동결건조 적하수오의 일반성분, 유리당, 아미노산 및 지방산 등을 비교분석하였다. 건물량을 기준으로 건조방법에 따른 적하수오의 일반성분 함량을 비교 하였을 때, 수분함량은 동결건조 적하수오가 유의적으로 낮게 나타났다. 유리당 분석에서 총 유리당 함량은 동결건조 적하수오에서 높게 나타났으며, fructose, glucose 및 sucrose의 함량 역시 동결건조 적하수오, 음건 적하수오, 열풍건조 적하수오 순으로 높게 나타났다. 유기산은 총 5종이 검출되었으며, oxalic acid가 가장 높게 나타났다. 적하수오의 주요 구성 아미노산은 arginine, glutamic acid, proline, serine, lysine 등이며, 총아미노산 함량, 필수아미노산 함량은 모두 동결건조 적하수오에서 높게 나타났다. 총 구성 아미노산 중 필수아미노산 함량 비율은 음건 적하수오에서 높게 나타났다. 유리 아미노산은 세가지 건조방법 모두에서 arginine과 proline이 함량이 높게 나타났으며, 총아미노산 함량, 필수아미노산 함량 및 총 구성 아미노산 중 필수아미노산 함량 비율은 모두 동결건조 적하수가 가장 높게 나타났다. 적하수오의 무기성분은 총4종이 검출되었으며, potassium이 가장 많았으며, sodium이 가장 낮게 나타났다. 적하수오에서 지방산은 포화지방산인 palmitic acid 1종과 불포화지방산인 oleic acid와 linoleic acid 2종이 검출되었다. 이상의 결과로 볼 때 하수오의 유용성분 손실이 가장 적은 건조방법은 동결건조로 생각되며, 산업적인 측면에서 비용을 고려한 건조방법은 건조온도를 조절한 열품건조 방법의 고안이 필요할 것으로 생각된다.

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.20-25
• /
• 2007

The performance of air-to-air heat exchanger has been investigated with rotating porous plates newly developed in this study. With an equal interval of 18 mm, the rotating porous plates are installed inside the heat exchanger where the hot and cold airs enter at opposite ends. When flowing in opposite directions by the separating plate installed in the center of the rotating porous plates, the airs give and receive the heat each other. Dry bulb temperature is set by adjusting heat supply at heater. In order to measure the temperature distribution of the hot air side inside heat exchanger, the thermocouples are inserted between the plates. The first location of thermocouple is 10mm downstream from the inlet of heat exchanger, and succeeding ten locations are aligned at an equal interval of 18mm. From the experiment of air-to-air heat exchanger with the rotating porous plates, the heat transfer rate increased as both air flow rate and RPM of the rotating porous plate increased. It was found that the overall heat transfer coefficient increased with the increase in RPM of porous plate at the conditions of the same air flow rate.

• 한국의류산업학회지
• /
• 제3권5호
• /
• pp.466-472
• /
• 2001

To find a suitable condition in this process examined, we investigated the main control factors, such as, the NaOH concentrations, such as, the NaOH concentrations, the heat treating times, and the heating temperatures. The resulting mechanical properties of the fabrics also studied. The samples used were Nylon/Co-PET sea-island type composite microfiber (Co-PET content: 35%) non-woven fabric. The conclusions obtained were as follows. 1. For the complete extraction of Co-PET from the sample non-woven fabric in the dry hot air process, $160^{\circ}C$ of air temperature, 15 min. of treatment time, and around 30% of NaOH concentration were required. On the other hand, in the wet hot air process, $140^{\circ}C$ of air temperature, 3.5 min. of treatment time, and around 30% of NaOH concentration were required. 2. The mechanical properties of the continuous processed samples showed that the WT, B, and WC increased with increasing the weight reduction ratio. However, the G, decreased with increasing the weight loss ratio. Note that, particularly in B, it increased drastically when the weight deduction ratios exceeded 30%. 3. As increasing the wet hot air temperature from 130 to $140^{\circ}C$, B appeared to increase, however, WT, G, and WC appeared to decrease. 4. The best condition found in this continuous process to extract Co-PET is the wet hot air temperature of 140, NaOH concentration of 28% or above, and the treatment time 2-4 min.

• 한국식품저장유통학회지
• /
• 제3권2호
• /
• pp.137-143
• /
• 1996

In order to produce the high-quality of dried red pepper with respect to a color and a taste we developed a automatic drier equipped with combined several heat energies(ADCHE). and compared the quality of ADCHE-treated red pepper with that of the pepper treated with conventional dryings such as natural, hot-air, and far-infrared ray dryings. The results obtained were as follows : (1) The contents of capsanthin varied significantly with drying methods within the range of 1.7 to 6. 4mg/g dry weight. The capsanthin level of red pepper treated with far-infrared ray drying was higher than that of the pepper treated with ADCHE showed the highest at 51.46mg/g dry weight of three drying methods. (2) As a result of determination of color intensity of-red-pepper using-a colorimeter, the red color intensity of the peppers was affected by drying methods irrespective of drying temperature, and especially a value of red pepper treated with ADCHE was appeared to be 19. 1, indicated that this pepper have the most bright color intensity. (3) The contents of soluble browing subatances increased with a increase in drying temperature, but L* value of red pepper treated with ADCHE was appeared to be 0.187, indicated that this red pepper have the most clear red color (4) The changes of capsanthin level of red pepper according to drying methodes did not show significantly, but generally a decreasing rate of capsanthin levels were lower in that order ADCHE

• 한국식품과학회지
• /
• 제5권1호
• /
• pp.1-5
• /
• 1973

Wet gluten 에 salt 및 소량의 산(酸)을 가하여 상압하(常壓下)에서 $6^{\circ}C$로 열풍건조하여 vital gluten 을 제조하였다. 이때 salt 및 산(酸)은 gluten의 점착성을 저하시켜 표면적을 크게하고 열내성(熱耐性)이 생기게 하여 건조를 쉽게 하였다. 1) Salt 농도는 높을수록 glulen의 건조가 용이하나, quality 는 저하되었다 salt 는 $5{\sim}10%$가 좋을 것같다. 2) Salt 외에 HCI을 0.12%첨가한 결과 건조 시간은 거의 반으로 단축되었고, glulen의 질(質)은 저하되지 않았다. 3) 산(酸)은 hydrochloric, acetic, phosphoric, lactic acid 중(中)에서 hydrochloric acid 건조 시간을 가장 적게 하였으며 질(質)은 별 차이 없으므로 hydrochloric acid 첨가가 가장 좋았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.688-692
• /
• 2005

Importance of substitute energy has been increasing due to environmental issues and lack of fossil fuels. In addition, heating cost that occupies from 30 to $40\%$ of the total production cost in Korean protected cultivation needs to be reduced for profitability and global competition. But, studying on substitute energy to solve these problems has not been activated for Korean protected cultivation. Therefore, this study was conducted to develop a geothermal heat pump system for cool ing and heat ing of greenhouses at a lower cost than conventional hot air heater and air conditioner. Fundamental test of heat transfer characteristics in soil was conducted by computer simulation and controlled tests for its verification. Based on the results of the theoretical and empirical investigations, an optimum heat pump system was developed and the performance was evaluated for practical use in a greenhouse at the Pusan Horticultural Experiment Station. The system was compared with a conventional hot air heating system through a cucumber growing test and economic feasibility analysis. Results of the application test of the geothermal heat pump showed that with an initial setting of $15^{\circ}C$ the inside temperature of the greenhouse could be maintained between 15 and $17^{\circ}C$. Results of the cucumber growing test showed that there were no significant differences in average height, leaf length, leaf width, number of nods, leaf area, dry weight and yield between the plots wi th the geothermal heat pump system and a conventional hot air heater. Economic feasibility analysis indicated that the variable cost of the hot air heater could be saved $81.2\%$ using the geothermal heat pump system. It was concluded that the geothermal heat pump system might be a pertinent heating and cooling system for greenhouses because of the low operating cost and the use of environment-friendly geothermal energy.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.256-260
• /
• 2001

This study was initially performed to investigate current red-pepper drying methods commonly being adopted on red-pepper cultivation farm area. Based on the informations obtained from the field survey, an experiment of red-pepper drying was carried out to verify the actual drying potential of plastic covered solar house similar to the conventional pipe frame greenhouses covered with one or two layer of plastic film. Some results obtained from field survey and drying experiment for red-pepper are summarized as follows; 1. Various patterns of red-pepper drying process were found; 1) complete natural drying with red-pepper exposed in outdoor air, 2) hot air drying by dry chamber only, 3) combination drying by hot air dryer together with plastic covered passive solar house, 4) drying with plastic covered solar house unit. 2. The average air temperatures of outdoor and solar house during drying experiment period were $26.9-30.8\;and\;28.6-33.8^{\circ}C$, respectively, and the maximum air temperatures of those two were $34.2-36.4\;and\;39.8\;-52.3^{\circ}C$, respectively. Horizontal solar intensity during experiment period was $18.49-23.96\;MJ/m^{2}$, and relative humidity of outdoor and experimental solar house were 56 - 66% and 64 - 70%, respectively. 3. The weight of red-pepper during drying experiment period was decreased almost linearly from initial moisture content of 85% to final moisture content of 14%.

• 동력기계공학회지
• /
• 제15권3호
• /
• pp.46-51
• /
• 2011

Low temperature vacuum drying technique, whose drying time and quantity of exhausting energy is about 25~30% of hot air drying, is very excellent in the drying efficiency. This paper is made out in the aspects of heat engineering with the object of developing Korean drying machine which can dry once a large quantity of objects to be dried in the state of low temperature and vacuum. As the results, it took about 17 hours(3~4 days in case of hot air drying) for material to reach about 18% of the final moisture content in order to store products for a long time, from about 78~80% of the early moisture content at the beginning of drying, and maximum drying rate comes to about 0.35 kg/m2hr at about 400% of the moisture content.

• 설비공학논문집
• /
• 제20권9호
• /
• pp.614-623
• /
• 2008

This paper presents the results of a laboratory study on the thermal conductivity of and(silica, quartzite, limestone, sandstone, granite and two masonry sands)-water mixtures used for ground heat exchanger backfilling materials. Nearly 260 tests were performed in a thermal conductivity measuring system to characterize the relationships between the thermal conductivity of mixtures and the water content. The experimental results show hat the thermal conductivity of mixtures increases with increasing dry density and with increasing water content. The most widely used empirical prediction models for thermal conductivity of soils were found inappropriate to estimate the thermal conductivity of unsaturated sand-water mixtures. An improved model using an exponential relationship to compute the thermal conductivity of dry sands and empirical relationship to assess the normalized thermal conductivity of unsaturated sand-water mixtures is presented.

• 설비공학논문집
• /
• 제20권5호
• /
• pp.342-350
• /
• 2008

This paper presents the results of a laboratory study on the thermal conductivity of sand (silica, quartzite, limestone and masonry sand)-water mixtures used in ground heat exchanger backfilling materials. Nearly 150 tests were performed in a thermal conductivity measuring system (TPSYS02) to characterize the relationships between the thermal conductivity of mixtures and the water content. The results show that the thermal conductivity of mixtures increases with increasing dry density and with increasing water content. The results also show that for constant water contents and a dry density value, the thermal conductivity of mixtures increases with increasing thermal conductivity of solid particles. The measurement results were also compared with the most widely used empirical prediction models for the thermal conductivity of soils.