• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.180-185
• /
• 2001

In order to regulate the physical characteristics of an ocean dumping material in the south-eastern East Sea, the diffusion characteristics with the observation, hydraulic experiment and numerical experiment data are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East Sea, the ocean dumping area had influenced the Tsushima warm current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913${\times}$10$^{7}$ $\textrm{cm}^2$/sec by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0∼2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffustion must be regard the pycnocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219${\times}$10$^{-8}$∼8,874${\times}$10$^{-4}$ $\textrm{cm}^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity. (4) From the result of diffusion simulation in the East Sea, the co-concentration line of 0.05 ppm and 0.1 ppm are limited at dumping area after 200 days. The constant concentration line of 0.01 ppm is distributed to the vicinity of Ulleungdo and Tokdo, but isn't distributed to the coastal area of East Sea and southern area of Jung in the East Sea.

• 한국해양공학회지
• /
• 제16권1호
• /
• pp.16-22
• /
• 2002

The diffusion characteristics of an ocean dumping material in the south-eastern East/Japan Sea related to regulate the physical characteristics with the observation and the hydraulic experiment are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East/Japan Sea, the ocean dumping area had influenced the Tsushima Warm Current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913$\times$10$^{7}$ by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0~2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffusion must be regard the pynocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219$\times$10$^{-8}$ ~8.874$\times$10$^{-4}$ cm$^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity.

• 한국해안해양공학회지
• /
• 제16권2호
• /
• pp.92-102
• /
• 2004

본 논문은 조류의 대ㆍ소조 변동이 존재하는 해역에서의 점열원에 대한 초과수온 분포를 예측하는 해석해를 다룬다. 해석해는 Jung et al.(2003)이 제시한 2차원 해석해를 기본으로 하여 조류의 대ㆍ소조 변동과 수평 확산계수의 대ㆍ소조 변화를 반영할 수 있는 형태로 확장되었다. 일련의 해석모형 실험을 통해 조류 및 난류확산의 변동에 따른 열오염의 이동ㆍ확산 변화를 검토하였다. 실험결과 열오염의 이동ㆍ확산은 tidal excursion 거리 이내에서는 조류의 크기에 좌우되며 tidal excursion 거리를 벗어난 해역에서는 주로 수평 확산에 의해 결정되는 것으로 나타났다. 특히 tidal excursion 거리 이내 해역에서 초과수온 분포는 수평 확산계수의 대ㆍ소조 변동에 큰 영향을 받는 것으로 나타났다. 즉, 1$^{\circ}C$이상의 비교적 높은 초과수온이 발생하는 범위는 수평 확산계수의 대ㆍ소조 변동을 고려하는 경우가 상대적으로 더 멀리 확장하는 경향을 보여주었다.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.191-199
• /
• 1993

정상 2차원 이송확산(移送擴散) 방정식의 수치해석에 의하여 난류전단(亂流剪斷) 흐름에서의 정상(定常) 수평(水平) 선오염원(線汚染源)의 확산(擴散)을 모의하였다. 유속과 난류확산계수(亂流擴散係數)의 수심에 따른 변화가 없을 경우에 대한 해석해와 비교한 결과, 일정 유속 및 난류확산계수(亂流擴散係數)를 가정할 경우 수심방향 확산(擴散)을 과대평가하는 것으로 나타났다. 무차원화된 지배방정식에 따르면 수심방향 확산(擴散)을 지배하는 물리적 변수는 마찰계수(摩擦係數)뿐이다. 마찰계수(摩擦係數)에 대한 확산과정의 민감도(敏感度) 분석(分析)으로부터 수심방향 확산속도(擴散速度)는 대략 마찰계수(摩擦係數)의 제곱근에 비례함을 알 수 있었다. 오염원(汚染源)의 초기 방류위치에 따른 민감도(敏感度) 분석(分析) 결과, 가장 신속한 수심 방향 확산(擴散)을 가져오는 최적의 방류위치는 수심의 중간정보다 위쪽이며, 마찰계수(摩擦係數)가 커질수록 그 위치가 수면쪽에 가까와지는 것으로 나타났다.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1319-1332
• /
• 1995

Numerical analysis was performed to characterize the particle deposition behavior on a horizontal free-standing wafer with thermophoretic effect under the turbulent flow field. A low Reynolds number k-.epsilon. turbulence model was used to analyze the turbulent flow field around the wafer, and the temperature field for the calculation of the thermophoretic effect was predicted from the energy equation introducing the eddy diffusivity concept. The deposition mechanisms considered were convection, diffusion, sedimentation, turbulence and thermophoresis. For both the upper and lower surfaces of the wafer, the averaged particle deposition velocities and their radial distributions were calculated and compared with the laminar flow results and available experimental data. It was shown by the calculated averaged particle deposition velocities on the upper surface of the wafer that the deposition-free zone, where the deposition velocite is lower than 10$^{-5}$ cm/s, exists between 0.096 .mu.m and 1.6 .mu.m through the influence of thermophoresis with positive temperature difference of 10 K between the wafer and the ambient air. As for the calsulated local deposition velocities, for small particle sizes d$_{p}$<0.05 .mu.m, the deposition velocity is higher at the center of the wafer than at the wafer edge, whereas for particle size of d$_{p}$ = 2.0 .mu.m the deposition takes place mainly on the inside area of the wafer. Finally, an approximate model for calculating the deposition velocities was recommended and the calculated deposition velocity results were compared with the present numerical solutions, those of Schmidt et al.'s model and the experimental data of Opiolka et al.. It is shown by the comparison that the results of the recommended model agree better with the numerical solutions and Opiolka et al.'s data than those of Schmidt's simple model.

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.105.2-117
• /
• 1992

The formation mechanism of the vortex streets in the lee of the mountain Is Investigated by a three-dimensional numerical model. The model is based upon the hydrostatic Boussinesq equations in which the vertical turbulent momentum flux is estimated by a turbulence parameterization scheme, but the horizontal viscosity is assumed to be constant. The results show that Karman vortex streets can form even without surface friction in a constant ambient flow with uniform stratification. The vortex formation is related to breaking of the mountain wave, which depends on the Froude number (Fr). In the case of a three-dimensional bell-shaped mountain, the wave breaking occurs when Fr is less than about 0.8, while a barman vortex forms when Fr is less than about 0.22. Vortex formation also depends on Reynolds number, which is estimated from the horizontal diffusivity. The vortex formation can be explained by the wave saturation theory given by Lindzen (1981) with some modification. Simulations in this study show that in the case of Karman vortex formation the momentum flux in the lower level is much larger than the saturated momentum flux, whereas it is almost equal to the saturated momentum at the upper levels as expected from the saturation theory. As a result, large flux divergence is produced in the lower layer, the mean flow is decelerated behind the mountain, and the horizontal wind shear forms between unmodified ambient wind. The momentum exchange between the mean flow and the mountain wave is produced by the turbulence within a breaking wave. From the result, well developed vortices like Karman vortex can be formed. . The results of the momentum budget calculated by the hydrostatic model are almost the same as nonhydrostatic results as long as horizontal scale of the mountain is 10 km. A well developed barman vortex similar to the hydrostatic one was simulated in the nonhydrostatic case. Therefore, we conclude that the hydrostatic assumption is adequate to investigate the origin of the Km8n vortex from the viewpoint of wave breaking.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권2호
• /
• pp.105-117
• /
• 1997

The formation mechanism of the vortex streets in the lee of the mountain is investigated by a three-dimensional numerical model. The model is based upon the hydrostatic Boussinesq equations in which the vertical turbulent momentum flux is estimated by a turbulence parameterization scheme, but the horizontal viscosity is assumed to be constant. The results show that Karman vortex streets can form even without surface friction in a constant ambient flow with uniform stratification. The vortex formation is related to breaking of the mountain wave, which depends on the Froude number (Fr). In the case of a three-dimensional bell-shaped mountain, the wave breaking occurs when Fr is less than about 0.8, while a Karman vortex forms when Fr is less than about 0.22. Vortex formation also depends on Reynolds number, which is estimated from the horizontal diffusivity. The vortex formation can be explained by the wave saturation theory given by Lindzen (1981) with some modification. Simulations in this study show that in the case of Karman vortex formation the momentum flux in the lower level is much larger than the saturated momentum flux whereas it is almost equal to the saturated momentum at the upper levels as expected from the saturation theory. As a result, large flux divergence is produced in the lower layer, the mean flow is decelerated behind the mountain, and the horizontal wind shear forms between unmodified ambient wind. The momentum exchange between the mean flow and the mountain wave is produced by the turbulence within a breaking wave. From the result, well developed vortices like Karman vortex can be formed. The results of the momentum budget calculated by the hydrostatic model are almost the same as nonhydrostatic results as long as horizontal scale of the mountain is 10 km. A well developed Karman vortex similar to the hydrostatic one was simulated in the nonhydrostatic case. Therefore, we conclude that the hydrostatic assumption is adequate to investigate the origin of the Karman vortex from the viewpoint of wave breaking.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.357-371
• /
• 2016

Buildings in the city acts as a cause of distorted wind direction, wind speed, causing the stagnation of the air flow. In the recent trend of climate change can not but consider the temperature rise of the urbanization. This study was aimed to analyze the thermal comfort of planetary boundary layer in different artificial constructions areas which has a direct impact on urban climate, and estimating the warming phenomena. Envi-met model was used to consider the urban structure associated with urban growth in order to precisely determine the impact of the building on the city weather condition. The analyzed values of thermal comfort index were temperature, wind speed, horizontal and vertical turbulent diffusivity. In particular, analysis of the PPD(Predicted Percentage of Dissatisfied) represents the human thermal comfort. In this study, by adjusting the arrangement and proportion of the top floor building in the urban it was found that the inflow of the fresh air and cooling can be derived low PPD. Vertical heat flux amount of the city caused by climate change was a factor to form a high potential temperature in the city and the accumulation of cold air does not appear near the surface. Based on this, to make the city effectively respond to climate change may require a long-term restructuring of urban spatial structure and density management.