• Applied Microscopy
• /
• 제31권3호
• /
• pp.223-233
• /
• 2001

우리나라 서해안에서 채집된 서해낙지(Octopus minor)의 정자 완성과정을 전자현미경을 통해 관찰한 결과 다음과 같았다. 서해낙지의 정자 완성 과정은 초기 중기 후기 정세포 그리고 성숙정자 등 4단계로 나눌 수 있었다. 초기 정세포는 구형의 세포로서 전자밀도가 낮아 밝게 보였으며 핵의 상단부 골지체로부터 형성된 첨체는 전자밀도가 높아서 어둡게 관찰되었다. 핵의 하단 근위 중심소체에서 유도된 것으로 보이는 extra-nuclear rod(enr)는 처음에는 구형에서 타원형으로 변모되면서 핵의 상단부위까지 신장되었으며, 원위중심소체로부터는 축삭이 형성되는 모습도 관찰되었다. 핵막 주위에서 많은 수의 미세소관으로 형성된 만췌트(manchette)도 관찰되었다. 중기 정세포는 핵내 염색질이 가는 실모양으로 응축 되었고, 이 시기에서도 만췌트가 핵막의 주위에서 관찰되었다. 특히 구형의 첨체는 긴 타원형으로 변모되면서 많은 수의 가로무늬를 형성하였고 전자밀도는 중등도로 나타났다. 후기 정세포는 핵내 염색질이 굵고 짧게 응축되었고, 중편에서는 미토콘드리아가 축삭을 감싸고 있는 mitochondrial sleeve를 형성하였다. 축삭은 전형적인 9+2 구조를 보였으며 축삭 주위에서는 9개의 금은 섬유(coarse fibres)도 관찰되었다. 성숙정자의 첨체 내강에서도 가로무늬가 관찰되었는데 특이하게도 가로무늬 사이에서 일정한 간격의 돌기물들이 관찰되었다. 성숙정자의 전체 길이는 약 $390{\mu}m$였으며 첨체는 나선형으로 꼬여 있었으나 머리부위는 꼬여 있지 않고 바나나 모양으로 약간 휘어져 있었다. 또한 정자의 중편에는 $11\sim12$개의 미토콘드리아가 굵은 섬유들을 둘러싸고 있었으며, 이 금은 섬유들은 꼬리의 주편 (main piece)까지만 연결되고 단편 (end piece)에서는 9+2구조의 축삭만이 관찰되었다.

• 한국지반신소재학회논문집
• /
• 제10권2호
• /
• pp.45-53
• /
• 2011

최근 보강토 옹벽은 점차 콘크리트옹벽을 대체하는 안정화된 공법으로 자리 잡아가고 있다. 그러나, 보강재로서 신장성보강재(Extensible reinforcement)를 사용할 경우 보강토 옹벽의 전면벽에서 배부름(Bulging) 현상이 발생할 수 있다. 보강토옹벽의 배부름(Bulging)은 임의의 블록 높이에서 그 블록의 상단 및 하단 블록이 설계상의 상대적인 위치를 확보하지 못하는 현상이다. 이는 보강재가 인장력을 발휘하기 위해서는 어느 정도 변형이 필요하기 때문에 이에 대한 설계상의 검토가 필요하다. 따라서 본 연구에서는 알루미늄 봉을 이용하는 소형모형실험을 통해서 보강재의 신장특성이 보강토 옹벽거동에 어떤 영향을 미치는지 연구하였다. 보강재는 비신장성 보강재로서 창호지와 신장성 보강재로서 멤브레인을 이용하였다. 실험결과로부터 보강재의 강성은 보강토옹벽의 변위형태에 많은 영향을 미치는 인자임을 알 수 있었으며, 전반적으로 보강재의 강성이 증가함에 따라 최대수평변위의 발생지점이 벽체 상부로 이동하는 경향을 보이고 있다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권4호
• /
• pp.275-279
• /
• 2010

Introduction: Guided bone regeneration (GBR) is a common procedure for the treatment of bone defects and bone augmentation. The nonresorbable barriers are well-documented barriers for GBR because of their stability and malleability. However, few GBR studies have focused on the different types of non-resorbable barriers. Therefore, this study examined the clinical results of different non-resorbable barriers for GBR; expanded polytetrafluoroethylene (e-PTFE) (TR-Gore Tex, Flagstaff, AZ, USA), and high-density polytetrafluoroethylene (d-PTFE) (Cytoplast membrane, Oraltronics, Bremen, Germany). Materials and Methods: The analysis was performed on patients treated with GBR and implant placement from January 2007 to October 2007 in the department of the Seoul National University Bundang Hospital. The patients were divided into two groups based on the type of non-resorbable barrier used, and the amount of bone regeneration, marginal bone resorption after prosthetics, implant survival rate and surgical complication in both groups were evaluated. Results: The implants in both groups showed high survival rates, and the implant-supported prostheses functioned stably during the follow-up period. During the second surgery of the implant, all horizontal defects were filled with new bone, and there was no significant difference in the amount of vertical bone defect. Conclusion: In bone defect areas, GBR with non-resorbable barriers can produce favorable results with adequate postoperative management. There was no significant difference in bone regeneration between e-PTFE and d-PTFE.

• Journal of Periodontal and Implant Science
• /
• 제27권1호
• /
• pp.249-262
• /
• 1997

The present study investigates the effects of calcium sulfate graft on the periodontal healing in intrabony periodontal defects of dogs. Following the general anesthesia with 30mg/kg pentobarbital injected intravenously, the first premolar was extracted and full-thickness periodontal flap was elevated from the second premolar to the fourth premolar. The portion of premolars coronal to the alveolar crest was removed and mesial and distal roots were separated. Exposed root canals were sealed with Caviton and covered completely with flaps sutured. Following the healing period of 12 weeks, the surgical sited were uncovered and $4{\times}4mm$ intrabony defects were surgically created. Those defects with calcium sulfate graft following the root planing was designated as the test sites and those with flap surgery-only were designated as control sites. The animals were sacrificed after 8 weeks and the healing was histologically analyzed. The results were as follows. 1. No foreign body reaction or inflammation were observed in either groups. Calcium sulfate was completely resorbed in the test sites. 2. New cementum was observed coronal to the notch in both groups. Connective tissue fibers were oriented parallel to the root surface in the controls. Connective tissues were formed in large amount in the sites. 3. Test sites showed marked amount of new bone formation while the control sites showed minimal bone gain. 4. Root resorption was observed in coronal portions of th control Sites. The results suggest that calcium sulfate is a biocompatible graft material with a potential for new bone and cementum formation.

• 대한치과의사협회지
• /
• 제55권1호
• /
• pp.30-41
• /
• 2017

Inadequate keratinized mucosa around dental implants can lead to more plaque accumulation, tissue inflammation, marginal recession and attachment loss. We evaluated the effects of free gingival and extracellular matrix membrane grafts performed to increase the insufficient width of keratinized tissue around dental implants in the posterior mandible. A 47-year-old female patient presented with discomfort due to swelling of the lower right second premolar area. Due to severe destruction of alveolar bone, the tooth was extracted. After 3 months, a guided bone regeneration (GBR) procedure was performed and then a dental implant was placed 6 months later. During the second-stage implant surgery, free gingival grafting was performed to increase the width of the keratinized tissue. After 12 months, a clinical evaluation was performed. A 64-year-old female patient had a missing tooth area of bilateral lower molar region with narrow zone of keratinized gingiva and horizontal alveolar bone loss. Simultaneous implant placement and GBR were performed. Five months after the first-stage implant surgery, a gingival augmentation procedure was performed with an extracellular matrix membrane graft to improve the width of the keratinized tissue in the second-stage implant surgery. After 12 months, a clinical evaluation was performed. In these two clinical cases, 12 months of follow-up, revealed that the increased width of the keratinized tissue and the deepened oral vestibule was well maintained. A patient showed a good oral hygiene status. In conclusion, increased width of keratinized tissue around dental implants could improve oral hygiene and could have positive effects on the long-term stability and survival rate of dental implants. When planning a keratinized tissue augmentation procedure, clinicians should consider patient-reported outcomes.

• Structural Engineering and Mechanics
• /
• 제13권5호
• /
• pp.557-568
• /
• 2002

For the evaluation of the capability of a tubular member of an offshore structure to absorb the collision energy, a simple method can be employed for the collision analysis without performing the detailed analysis. The most common simple method is the rigid-plastic method. However, in this method any characteristics for horizontal movement and rotation at the ends of the corresponding tubular member are not included. In a real structural system of an offshore structure, tubular members sustain a certain degree of elastic support from the adjacent structure. End fixity has influences in the behaviors of a tubular member. Three-dimensional FEM analysis can include the effect of end fixity fully, however in viewpoints of the inherent computational complexities of the 3-D approach, this is not the recommendable analysis at the initial design stage. In this paper, influence of end fixity on the behaviors of a tubular member is investigated, through a new approach and other approaches. A new analysis approach that includes the flexibility of the boundary points of the member is developed here. The flexibility at the ends of a tubular element is extracted using the rational reduction of the modeling characteristics. The property reduction is based on the static condensation of the related global stiffness matrix of a model to end nodal points of the tubular element. The load-displacement relation at the collision point of the tubular member with and without the end flexibility is obtained and compared. The new method lies between the rigid-plastic method and the 3-demensional analysis. It is self-evident that the rigid-plastic method gives high strengthening membrane effect of the member during global deformation, resulting in a steeper slope than the present method. On the while, full 3-D analysis gives less strengthening membrane effect on the member, resulting in a slow going load-displacement curve. Comparison of the load-displacement curves by the new approach with those by conventional methods gives the figures of the influence of end fixity on post-yielding behaviors of the relevant tubular member. One of the main contributions of this investigation is the development of an analytical rational procedure to figure out the post-yielding behaviors of a tubular member in offshore structures.

• 대한화학회지
• /
• 제6권1호
• /
• pp.1-9
• /
• 1962

高純度의 $UO^2$ pellets나 或은 $UF_4$를 얻는 것을 目標로 하여 그 計劃의 一郡으로 純粹한 $UO_2^{++}$ 溶液을 $U^{+4}$溶液으로 電解還元하는 方法을 實驗하였다. 現在 實施되고 있는 方法으로서는 純粹한 $UO_3$粉末을 水素 或은 ADU(ammonium diuranate)를 熱分解하여 生成되는 分解된 암모니아로서 600 내지 900$^{\circ}C$ 還元하거나 혹은 복잡한 構造를 가진 Excer cell로서 濕式電解하는 方法들이 있다. 이 報告는 從來의 Excer cell을 改造하여 水銀陰極과 陽이온 交換樹脂의 膈膜 및 鉛陽極으로 구성되는 간단한 電解裝置로서 $UO_2^{++}$ 溶液을 連續的으로 電解시켰을 때 가장 適合한 電解槽의 構造, 電解液의 溫度, 電解液의 種類와 濃度 또 各 流量과 電流密度에 따르는 電流效率, 電解槽電壓等을 測定한 結果를 記錄하고 電解反應을 說明한 것이다. 實驗結果에 依하면 電解槽는 水平式으로 하여 길이와 폭의 比가 20對 1이고 電解液은 還元에 所要될 때 理論量 以上의 遊離黃酸이 共存하는 可及的 高農度의 $UO_2SO_4$ 溶液과 그에 比例하는 電流密度를 使用하여 電解함으로써 單一過程의 電解에 依하여 $UO_2^{++}$ 를 $U^{+4}$로 80 내지 95%의 電流效率로서 還元시킬 수 있다는 것을 알았다.

• Applied Microscopy
• /
• 제26권1호
• /
• pp.79-93
• /
• 1996

The differentiation of nail matrix and fine structure of matrix cells were studied with light and electron microscope using specimens from nails of thumb finger in Korean fetuses 14 to 24 weeks old. Fetal nail matrix consisted of two horizontal layers, thicker ventral and thinner dorsal matrices, originating from invagination of epidermis in proximal nail field. Matrix being generally thicker in its distal region than the apex became gradually thickened with increase of the fetal age. Each matrix consisted of single layer of basal cells and multiple layers of squamous cells which are arranged close to and parallel to the central axis of the nail mairix. The process of keratinization of fetal nail matrix was noted to be occured concurrently in the ventral and dorsal matrices along the central axis of matrix toward distal and dorsal direction. Squamous cells became matured with accumulation of tonofilaments, increase of keratohyalin granules, discharge of membrane coating granules, and narrowing of intercellular spaces, thickening of plasma membrane and finally being transformed into horny cells of nail plate. Horny cells of nail plate filled with fibrous elements in the electron dense amorphous substance. These findings of keratinization process of fetal nail matrix appeared to be similar to those of keratinization in epidermis and inner root sheath of the hair. In the nail matrix, however, corresponding region to the keratogenous zone of growing hair follicle was not observed. Vacuolated squamous cells of nail matrix seen on light microscopy was considered to be artefactual product, but squamous cells with condensed small nuclei rarely found adjacent nail plate was considered to be one of the squamous cells with unknown function. Proximal end of nail plate was observed on dorsal surface of nail field distal to the proximal nail fold at 14 and 16 weeks old human embryos. Proximal prolongation of the proximal end of nail plate was occured with advancing fetal age and afterward 21 weeks nail plate invaded into nail matrix. Melanin granule containing cells and Merkel cells were present only on the basal layer of dorsal nail matirx.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.375-387
• /
• 2018

This paper presents a review on progressive collapse mechanism of steel framed buildings exposed to fire. The influence of load ratios, strength of structural members (beam, column, slab, connection), fire scenarios, bracing systems, fire protections on the collapse mode and collapse time of structures is comprehensively reviewed. It is found that the key influencing factors include load ratio, fire scenario, bracing layout and fire protection. The application of strong beams, high load ratios, multi-compartment fires will lead to global downward collapse which is undesirable. The catenary action in beams and tensile membrane action in slabs contribute to the enhancement of structural collapse resistance, leading to a ductile collapse mechanism. It is recommended to increase the reinforcement ratio in the sagging and hogging region of slabs to not only enhance the tensile membrane action in the slab, but to prevent the failure of beam-to-column connections. It is also found that a frame may collapse in the cooling phase of compartment fires or under travelling fires. This is because that the steel members may experience maximum temperatures and maximum displacements under these two fire scenarios. An edge bay fire is more prone to induce the collapse of structures than a central bay fire. The progressive collapse of buildings can be effectively prevented by using bracing systems and fire protections. A combination of horizontal and vertical bracing systems as well as increasing the strength and stiffness of bracing members is recommended to enhance the collapse resistance. A protected frame dose not collapse immediately after the local failure but experiences a relatively long withstanding period of at least 60 mins. It is suggested to use three-dimensional models for accurate predictions of whether, when and how a structure collapses under various fire scenarios.

• 한국강구조학회 논문집
• /
• 제16권3호통권70호
• /
• pp.377-385
• /
• 2004

본 논문에서는 강판-콘크리트 벽체구조에 부착되는 기기를 지지하기 위하여 설치되는 지지대와 벽채와의 접합 성능을 파악하기 위하여 구조실험 및 유한요소해석을 수행하였다. 구조실험은 9개의 시험체를 제작하여 파괴모드 및 최대내력을 파악하였으며 유한요소해석모델을 작성하여 이를 실험결과와 비교 검증한 후 강판두께, 스터드 볼트 간격, 지지대의 위치 및 크기 등의 영향인자가 벽체 접합부의 거동 및 내력에 미치는 변화를 살펴보았다. 해석 시험체의 하중-변형의 관계로부터 시험체의 항복내력 및 최대내력을 정의 하였으며 향후 항복선 해석을 위한 토대를 마련하였다.