• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2004년도 학술발표논문집 Proceedings of Coastal and Ocean Engineering in Korea
• /
• pp.150-159
• /
• 2004

In the present paper, the hydrodynamics properties of a Rahmen type flexible porous breakwater with dual fixed-pontoon system interacting with obliquely or normally incident small amplitude waves are numerically investigated. This system is composed of dual vertical porous membranes hinged a the side edges of dual fixed pontoons, and a submerged horizontal membrane that both ends are hinged at the steel frames mounted pontoons. The dual vertical membranes are extended downward and hinged at bottom steal frame fixed into seabed. The wave blocking and dissipation mechanism and its effects of permeability, Rahmen type membrane and pontoon geometry, pre-tensions on membranes, relative dimensionless wave number, and incident wave headings are thoroughly examined.

• Journal of Periodontal and Implant Science
• /
• 제49권1호
• /
• pp.14-24
• /
• 2019

Purpose: To assess the influence of using different combinations of guided bone regeneration (GBR) materials on volume changes after wound closure at peri-implant dehiscence defects. Methods: In 5 pig mandibles, standardized bone defects were created and implants were centrally placed. The defects were augmented using different combinations of GBR materials: xenogeneic granulate and collagen membrane (group 1, n=10), xenogeneic granulate and alloplastic membrane (group 2, n=10), alloplastic granulates and alloplastic membrane (group 3, n=10). The horizontal thickness was assessed using cone-beam computed tomography before and after suturing. Measurements were performed at the implant shoulder (HT0) and at 1 mm (HT1) and 2mm (HT2) below. The data were statistically analysed using the Wilcoxon signed-rank test to evaluate within-group differences. Bonferroni correction was applied when calculating statistical significance between the groups. Results: The mean horizontal thickness before suturing was $2.55{\pm}0.53mm$ (group 1), $1.94{\pm}0.56mm$ (group 2), and $2.49{\pm}0.73mm$ (group 3). Post-suturing, the values were $1.47{\pm}0.31mm$ (group 1), $1.77{\pm}0.27mm$ (group 2), and $2.00{\pm}0.48mm$ (group 3). All groups demonstrated a loss of horizontal dimension. Intragroup changes exhibited significant differences in group 1 (P<0.001) and group 3 (P<0.01). Intergroup comparisons revealed statistically significant differences of the relative changes between groups 1 and 2 (P=0.033) and groups 1 and 3 (P=0.015). Conclusions: Volume change after wound closure was minimized by using an alloplastic membrane. The stability of the augmented horizontal thickness was most ensured by using this type of membrane irrespective of the bone substitute material used for membrane support.

• The Korean Journal of Physiology and Pharmacology
• /
• 제2권1호
• /
• pp.21-30
• /
• 1998

The effects of GABA and glutamate on the horizontal cells were explored by an intracellular recording method to discern the mechanisms of receptive field formation by chemical coupling in the catfish outer retina. The results suggest that the horizontal cells of the catfish retina might use GABA as their transmitters and that the GABAergic system contributes to the formation of receptive fields of the horizontal cells. GABAC receptors may be involved in a chemical coupling between horizontal cells and concerned with the depolarizing actions by GABA on horizontal cells in the catfish retina. Since the chloride equilibrium potential is more positive than the dark membrane potential in horizontal cells, GABA released from a horizontal cell may depolarize the neighboring horizontal cells. Thus a chemical coupling between horizontal cells may be formed. $GABA_A$ receptors also may be involved in the negative feedback mechanism between photoreceptor and horizontal cell. And glutamate may be involved in connecting positive and negative feedback systems since it potentiated the GABA's actions. Therefore, it is presumed that large receptive fields in the catfish retina are formed not only by electrical coupling but also by chemical coupling between horizontal cells. And information travels laterally by pathways involving both electrical coupling composed of gap junctions and chemical coupling in the retinal network.

• Wind and Structures
• /
• 제36권3호
• /
• pp.149-160
• /
• 2023

Lightness and flexibility of membrane roofs make them very sensitive to any external load. One of the most important parameters that controls their behavior, especially under wind load is the sag/span ratio of edge cables. Based on the value of the pretension force in the edge cables and the horizontal projection of the actual area covered by the membrane, an optimized design range of cable sag/span ratios has been determined through carrying on several membrane form-finding analyses. Fully coupled fluid structure dynamic analyses of these membrane roofs are performed under wind load with several conditions using the CFD method. Through investigating the numerical results of these analyses, the behavior of membrane roofs with cables sag/span ratios selected from the previously determined optimized design range has been evaluated.

• 한국수소및신에너지학회논문집
• /
• 제25권4호
• /
• pp.419-424
• /
• 2014

Direct ethanol fuel cell has been fabricated with ceramic membrane. A porous silicon carbide (SiC) membrane having approximately 30% porosity has been applied for a direct ethanol proton exchange membrane (DE-PEM) fuel cell. A horizontal type cell having Pt ($18mg/cm^2$) catalyst layer on both side of the ceramic membrane was used for the demonstration test. The ethanol oxidation based-fuel cell stack showed very high voltage (1.289V) and measurable current level (68mA) even though at room temperature.

• 한국해양공학회지
• /
• 제17권1호
• /
• pp.8-15
• /
• 2003

본 논문에서는 투과성 유연막이 수면밑 일정한 깊이에 수평으로 잠겨있을 때 투과성 유연막에 의한 파랑제어성능을 살펴보았다. 해석 방법으로는 유체문제는 고유함수전개법 (Eigenfunction expansion method)을 사용하였고, 유연막과 파랑의 상호작용문제는 Newmann 이 제시한 유탄성 이론 (hydro-elastic theory)을 채택하였다. 막의 투과성 효과를 고려하기 위하여 수평막에서의 수직속도는 수평막 상하의 압력차에 선형적으로 비례하며 그들 사이에는 위상차가 없다고 가정한 Darcy 법칙을 사용하였다. 투과성 수평막의 설계변수 (초기장력, 길이, 잠긴 깊이, 공극율)와 입사파의 주파수를 바꿔가면서 반사율과 투과율 그리고 에너지 손실율을 살펴보았다.

• 한국해안·해양공학회논문집
• /
• 제21권4호
• /
• pp.290-300
• /
• 2009

연직 막체방파제에 대한 기존의 수치해석에서는 막체의 운동 중 발생하는 변동장력성분이 초기장력에 비하여 미미하다는 가정 하에 운동 중의 막체 장력을 초기장력으로 대체하는 선형해석을 수행하였다. 본 수치해 석에서는 막체장력의 비선형 변화를 한 주기 동안의 평균장력으로 대체하며 이 평균장력을 반복계산을 통하여 구해나가는 준 비선형 해석을 수행하였다. 상기 선형해석 결과와 비교하여 입사파 주기가 증가할수록 반사율은 증가하며 전달율은 감소하는 것으로 나타났다. 아울러, 본 준 비선형해석을 계류형태를 달리하는 두 구조물에 적용한 결과, 막체의 수평변위의 제어가 방파성능에 밀접한 효과가 있는 것으로 나타났다. 막체의 수평변위를 억제하기 위해서는 막체의 초기장력을 증가시키거나 막체의 중간부에 계류라인을 추가 결속시키는 방법들이 있으나 이를 위해서는 연직 하향 계류력을 지지하기 위한 대형 수면 부표의 설치가 요구된다.

• Journal of Periodontal and Implant Science
• /
• 제34권3호
• /
• pp.509-522
• /
• 2004

This study was performed to compare the clinical effectiveness of two regenerative techniques for class II furcation involvements in human: a combination of bone grafts with PRP vs. GTR with bone grafts. The e-PTFE group was treated with non-absorbable membrane and bone grafts, the PRP group was treated with PRP and bone grafts Pocket depth, clinical attachment level, and gingival recession were measured at baseline and postoperative 6 months. Vertical and horizontal furcation depth were measured by re-entry surgeries at 6 months post-treatment Both groups were statistically analyzed by Wilcoxon signed Ranks Test & Mann-whitney Test using SPSS program (5% significance level). The results were as follows: 1. The change of pocket depth, clinical attachment level, vertical furcation depth and horizontal furcation depth in both groups was decreased significantly at 6 months than at baseline. (p<0.05) 2. The change of gingival recession in both groups was increased significantly at 6 months than at baseline. (p<0.05) 3. The change of alveolar crest absorption in both groups was increased at 6 months than at baseline but there were no statistically significant differences. 4. The change of pocket depth, clinical attachment level, vertical furcation depth and horizontal furcation depth in both groups was increased significantly at 6 months, but there were no statistically or clinically significant differences with both groups. 5. The change of gingival recession and alveolar crest absorption in both groups was increased at 6 months, but there were no statistically or clinically significant differences with both groups. In conclusion, the use of bone graft with PRP or GTR technique improved clinical index of the soft and hard tissue in mandibular class II furcation involvement but there were no statistically or clinically significant differences between bone graft with PRP and GTR technique.

• 멤브레인
• /
• 제6권1호
• /
• pp.32-36
• /
• 1996

키토산에 acylation을 하여 acylate된 키토산을 합성하였으며 이 acylate된 키토산을 trough 위에 spreading하여 $\pi-A$ curve를 얻었다. 이 $\pi-A$ curve로부터 glucose unit 당의 제한 면적을 계산할 수 있었으며 온도에 따른 $\pi-A$ curve의 변화도 측정하였다. 또한 유리판을 수평적으로 접하는 방법으로 이 단분자막을 유리판 위에 transfer할 수 있었다.

• 대한구강악안면임플란트학회지
• /
• 제22권4호
• /
• pp.242-254
• /
• 2018

The aim of the current study was to evaluate the results of horizontal guided bone regeneration (GBR) with xenograf t (deproteinized bovine bone mineral, DBBM), allograf t (irradiated allogenic cancellous bone and marrow), titanium membrane, resorbable collagen membrane, and advanced platelet-rich fibrin (A-PRF) in the anterior maxilla. The titanium membrane was used in this study has a three-dimensional (3D) shape that can cover ridge defects. Case 1. A 32-year-old female patient presented with discomfort due to mobility and pus discharge on tooth #11. Three months after extracting tooth #11, diagnostic software (R2 GATE diagnostic software, Megagen, Daegu, Korea) was used to establish the treatment plan for implant placement. At the first stage of implant surgery, GBR for horizontal augmentation was performed with DBBM ($Bio-Oss^{(R)}$, Geistlich, Wolhusen, Switzerland), irradiated allogenic cancellous bone and marrow (ICB $cancellous^{(R)}$, Rocky Mountain Tissue Bank, Denver, USA), 3D-titanium membrane ($i-Gen^{(R)}$, Megagen, Daegu, Korea), resorbable collagen membrane (Collagen $membrane^{(R)}$, Genoss, Suwon, Korea), and A-PRF because there was approximately 4 mm labial dehiscence after implant placement. Five months after placing the implant, the second stage of implant surgery was performed, and healing abutment was connected after removal of the 3D-titanium membrane. Five months after the second stage of implant surgery was done, the final prosthesis was then delivered. Case 2. A 35-year-old female patient presented with discomfort due to pain and mobility of implant #21. Removal of implant #21 fixture was planned simultaneously with placement of the new implant fixture. At the first stage of implant surgery, GBR for horizontal augmentation was performed with DBBM ($Bio-Oss^{(R)}$), irradiated allogenic cancellous bone and marrow (ICB $cancellous^{(R)}$), 3D-titanium membrane ($i-Gen^{(R)}$), resorbable collagen membrane (Ossix $plus^{(R)}$, Datum, Telrad, Israel), and A-PRF because there was approximately 7 mm labial dehiscence after implant placement. At the second stage of implant surgery six months after implant placement, healing abutment was connected after removing the 3D-titanium membrane. Nine months after the second stage of implant surgery was done, the final prosthesis was then delivered. In these two clinical cases, wound healing of the operation sites was uneventful. All implants were clinically stable without inflammation or additional bone loss, and there was no discomfort to the patient. With the non-resorbable titanium membrane, the ability of bone formation in the space was stably maintained in three dimensions, and A-PRF might influence soft tissue healing. This limited study suggests that aesthetic results can be achieved with GBR using 3D-titanium membrane and A-PRF in the anterior maxilla. However, long-term follow-up evaluation should be performed.