• 한국정보통신학회논문지
• /
• 제24권11호
• /
• pp.1519-1527
• /
• 2020

일반적인 방사선 측정장치는 방사능 오염원에 대한 선량률을 측정하는 공간 선량률 탐지 장치와 방사능 오염정보에 대한 2차원 또는 3차원 영상화 장치의 형태로 개발되었다. 이러한 방사선 계측 기법은 각각의 장단점을 가지고 있으나 방사능 사고 지역에서 인명피해를 최소화하며, 빠른 제염을 위해서는 두 가지 탐지 장치의 장점이 모두 필요하다. 방사능 오염원으로부터 방사능 피해를 최소화하기 위해서는 방출되는 방사선에 대한 선량률 뿐만 아니라 어디에서 방출되고 있는지를 빠르게 확인해야 하기 때문이다. 본 논문에서는 방사능 오염원 탐지를 위한 검출 센서와 회전체, 방향성을 갖는 콜리메이터를 이용하여 방사능 오염원에 대한 선량률 및 방향 정보를 실시간으로 측정 할 수 있는 기법을 고안하였다. 회전형 기반의 방사능 탐지 장치는 탐지 센서를 둘러싼 회전체가 회전하며 개구부와 일치할 때 획득되는 방사능 정보와 회전체의 위치정보를 통해 선량률과 방향을 확인할 수 있도록 구성하였으며, 다수개의 홀을 통해 수직, 수평 방향에 대한 측정 기법을 제안하였다. 탐지 결과 수평 방향에서의 탐지 시 방향 정보에 대한 측정오차는 1% 미만으로 확인하였다.

• 한국군사과학기술학회지
• /
• 제19권6호
• /
• pp.675-680
• /
• 2016

This is a study for the improvement of the defected elevator spar in operating aircraft. The elevator spar web holes were analyzed to find out the cause of the cracks. The fatigue striations were observed and the cracks occurred by the repetitive stresses during the elevator works. Also the outboard connection structure of the elevator and horizontal stabilizer was more weak shape than the inboard. The design changes were recommended and the analyses were performed to verify the improvement of the changed shapes.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.89-92
• /
• 2006

본 연구는 원통형 탱크에서의 유동의 배수 특성을 메시형 회전억제장치의 중앙 구멍의 크기를 변화하면서 연구하였다. 그리고 원통 탱크 내부의 회전을 억제하는 다른 형태의 회전 억제장치를 사용하여 그에 따른 유동의 변화를 규명하고자 하였다. 측정 장치는 PIV을 이용하여 수행하였으며, 회전이 탱크 내부에 회전이 없는 경우와 있는 경우에 측정하였으며, 배수가 없는 경우와 배수가 있는 경우도 측정하였고 원통 탱크의 수직면과 수평면을 측정하였다.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.820-829
• /
• 2004

The In-Containment Refueling Water Storage Tank (IRWST), one of the design improvements applied to the APR -1400, has a function to condense the high enthalpy fluid discharged from the Reactor Coolant System (RCS). The condensation of discharged fluid by the tank water drives the tank temperature high and causes oscillatory condensation. Also if the tank cooling water temperature approaches the saturated state, the steam bubble may escape from the water uncondensed. These oscillatory condensation and bubble escape would burden the undue load to the tank structure, pressurize the tank, and degrade its intended function. For these reasons simple analytical modeling and experimental works were performed in order to predict exact tank temperature distribution and to find the effective cooling method to keep the tank temperature below the bubble escape limit (93.3$^{\circ}C$), which was experimentally proven by other researchers. Both the analytical model and experimental results show that the temperature distributions are horizontally stratified. Particularly, the hot liquid produced by the condensation around the sparger holes goes up straight like a thermal plume. Also, the momentum of the discharged fluid is not so strong to interrupt this horizontal thermal stratification significantly. Therefore the layout and shape of sparger is not so important as long as the location of the sparger hole is sufficiently close to the bottom of the tank. Finally, for the effective tank cooling it is recommended that the locations of the discharge and intake lines of the cooling system be cautiously selected considering the temperature distribution, the water level change, and the cooling effectiveness.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.557-564
• /
• 2002

Corrugated board is an efficient low-cost structure material fur the boxes that are widely used for transporting, storing and distributing goods. Corrugated board is also considered as an orthotropic because the principal material directions are the same as in paperboard. The purpose of this study was to elucidate the principal design parameters of ventilating box through the FEA on the various types of ventilating hole. From the viewpoint of the stress distribution and stress level, the optimum pattern and location of the ventilating hole were vertically oblong, and symmetry position with a short distance to the right and left from the center of front and rear panel. And, the optimum location and pattern of hand hole were a short distance to the top from the center of both side panels, and modified shape to increase the radius of curvature of both side in horizontal oblong. In general, the optimum pattern and location of both the ventilating hole and hand hole based on the FEM analysis were well verified by experimental investigation. It is suggested that decrease in compressive strength of the box could be minimized in the same ventilating hole area under the condition of the length of major axis of ventilating hole is less than 1/4 of box length, the ratio of minor axis/major axis is 113.5∼l/2.5, and number of the ventilating holes is even and symmetrical.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1315-1320
• /
• 2008

An experimental study was carried out to study the solid-liquid mixture upward flow in a vertical and inclined annulus with rotating inner cylinder. Lift forces acting on a fluidized particle plays a central role in many importance applications, such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, sediment transport and cleaning of particles from surfaces, etc. Field measurements have revealed that the pressure drop over a borehole during drilling of a slim oil well or a well with a long reach can depend significantly on the rotation speed of the drill pipe. An accurate prediction of the annular frictional pressure drop is therefore important for conditions where the annular clearance is small. Effect of annulus inclination and drill pipe rotation on the carrying capacity of drilling fluid, particle rising velocity, and pressure drop in the slim hole annulus have been measured for fully developed flows of water and of aqueous solutions.

• Journal of Ginseng Research
• /
• 제25권2호
• /
• pp.82-88
• /
• 2001

This study was carried out to investigate a point of difference between normal and inferior Korean red ginseng (Naeback red ginseng = red ginseng with white part of clear boundary in phloem and/or xylem of ginseng body, saengnaeback red ginseng red ginseng with white part of indistinct boundary). White part with clear or indistinct boundary in center of ginseng body was observed in inferior red ginseng (naeback and saengnaeback red ginseng), and the differences in the internal color intensity was also found with naked eye. In hunter color values of normal and inferior parts of red ginseng in accordance with particle size, L value was increased with a diminishment in particle size, while a and b value were decreased. Absorbance at visible spectrum did not differ from water and 70% ethanol extract from normal and inferior parts of red ginseng, but absorbance in UV spectrum of extract from naeback part showed higher than those of normal and saengnaeback part. In comparison of intrastructure by electron microscope, the horizontal and vertical section of cortex and pith layer from normal part showed the very dense state, but small holes were found in naeback part of red ginseng by naked eye and electron microscope. The specific surface area of normal, naeback and saengnaeback part appeared 3.02, 3.33 and 6.55 ㎡/g, respectively. From above results, we consider saengnaeback red ginseng is red ginseng in the intermediate process which normal red ginseng changes to naeback red ginseng.

• Journal of Welding and Joining
• /
• 제16권4호
• /
• pp.125-135
• /
• 1998

The shielded metal arc welding (SMAW) by AC power source was performed to evaluate the arc stability by arc monitoring and analysing. In this study, the arc stability index was evaluated quantitatively by using he coefficient of resistance variation for welding time. This coefficient was obtained for the long time (20sec.) by analysing the waveforms of welding current, voltage and resistance. The coefficient was applied to indicate numerically the variation level of arc length and the degree of arc extinction. Using the coefficient of resistance variation in practical welding, the arc stability of the high titanium oxide electrode (KS E4313) turned out to be better than that of the low hydrogen electrode (KS E4316). In evaluating the skill level of welders by the coefficient, the horizontal fillet weaving welding became clear to be very discriminating because the higher level welder could weave in keeping constant arc length, but the lower level welder showed the characteristics of weaving with the unstable arc length. And it was confirmed that the welding defects as blow holes was formed when the arc stability index were high.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.412-417
• /
• 2005

To ensure the safety of the tunnelling without the loss of economy, the tunnel seismic profiling(TSP) method for the prediction ahead of tunnel face, begins to be used routinely in these days. TSP method does not interfere the tunnelling works while the horizontal drilling does, and its prediction length is longer than that of the drilling. Yet the most frequently adopted technique of TSP in Korea is the multi-shot and 2 receiver array using in-hole receivers, even though this array requires as many as 26 drill-holes for receiver installation and ballasting, which results in 3-6 hours of suspension in excavation work. In this paper, multi-receiver and lesser shot array using side-wall attached 3 component geophones is to be described to prove the efficiency in terms of the survey time as well as the reliability of the method by comparison of the predicted weak points and the face mapping results. The predictions mostly agreed with the real fractures or joint developed zones which have been confirmed during the excavation. It also has been found that TSP method can be effectively applied to perform draining ground water ahead of tunnel face by imaging the geologic discontinuities.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.46-51
• /
• 2007

포항가속기연구소의 HFMX(High Flux Macromolecular X-ray crystallography) 빔라인은 다극 위글러의 방사광을 이용한다. 따라서 고 열량부하에 적합한 두 개의 수평 및 수직 슬릿이 빔라인의 프론트엔드 영역에 설치되었다. 빔 산란을 피하면서 고 열량부하를 처리하기 위하여, 빔을 차단하는 수평 슬릿의 두 글리드콥 블록은 수직면 상에서 기울어진, $10^{\circ}$의 스침각 경사면 구조를 이루고 있다. 글리드콥 블록들은 두 개의 구동막대에 의해서 궤도대를 따라 각각 병진함으로써 슬릿의 간격을 조정한다. 구동막대 내부에 가공된 유로를 통하여 흐르는 냉각수가 두 블록의 열량부하를 냉각시킨다. 수직 슬릿은 진공용기에 대한 설치 방향과 스침각 경사면 구조의 경사각만 다를 뿐 수평 슬릿과 동일한 구조를 가지고 있다. 블록들이 궤도대 상에서 정밀하게 조정되므로 두 블록 간의 정렬이 필요치 않은 장점이 있으며 설치된 슬릿들은 안정적인 작동 성능을 보이고 있다. 또한, 두 슬릿의 냉각 성능도 만족할 만한 것으로 나타났다. 본 논문에서는 두 슬릿의 설계에 대한 상세한 설명이 제시되고 그 작동 성능을 검토한다.