• Journal of Microbiology
• /
• v.45 no.3
• /
• pp.205-212
• /
• 2007

Anoxygenic photosynthesis, performed primarily by anoxygenic photosynthetic bacteria (APB), has been supposed to arise on Earth more than 3 billion years ago. The long established APB are distributed in almost every corner where light can reach. However, the relationship between APB phylogeny and source environments has been largely unexplored. Here we retrieved the pufM sequences and related source information of 89 pufM containing species from the public database. Phylogenetic analysis revealed that horizontal gene transfer (HGT) most likely occurred within 11 out of a total 21 pufM subgroups, not only among species within the same class but also among species of different phyla or subphyla. A clear source environment feature related phylogenetic distribution pattern was observed, with all species from oxic habitats and those from anoxic habitats clustering into independent subgroups, respectively. HGT among ancient APB and subsequent long term evolution and adaptation to separated niches may have contributed to the coupling of environment and pufM phylogeny.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.103-110
• /
• 2005

In this paper, the characteristics of excessive horizontal stress components in Korea were studied using more than five hundred measured data set of in-situ hydraulic fracturing test. Based on the in-situ testing data, the magnitude and orientation of the horizontal stress component and variation of stress ratio (K) with depth were investigated. And also horizontal stress magnitude versus depth relationships and distribution limits of stress ratio components were suggested. For the depth less than 310 m in the entire territory, the stress ratio has a tendency to diminish and stabilize with depth, but fur some areas, it was revealed that the excessive horizontal stress fields with stress ratio close to 3.0 below 200 m in depth have formed. The results from the investigation of excessive horizontal stress regions showed that there existed several regions where the localized excessive horizontal stress was big enough to potentially induce brittle failure around the openings at less than 300 m in depth.

• Journal of the Korea Convergence Society
• /
• v.10 no.7
• /
• pp.47-54
• /
• 2019

The purpose of this study was to investigate the effect of visual conditions on the static balance of stable and unstable surfaces. Thirty healthy adults participated in this study (13 men, 17 women). Visual conditions were set as vertical, horizontal, and diagonal. It was performed on the pad to measure the balance on the unstable support surface. Using the balance measuring instrument, the General Stability Index, Weight Distribution Index, and Weight Distribution was measured. Paired t-tests were used for ground-based comparisons and one-way ANOVAs were used for comparisons within the same ground. The general stability index showed a significant difference according to the horizontal and vertical line directions on the stable support surface(p<.05). According to the comparison between the grounds, the weight distribution index on the unstable support surface showed a significant difference(p<.05). Weight distribution showed significant differences between the left and right eyes on the support surface with the stable and the unstable horizontal visual condition(p<.05). In static balance training, vertical and diagonal visual direction conditions are predicted to be helpful for training.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.403-408
• /
• 1999

An efficient method is developed for classifying fingerprint data based on 2-D discrete wavelet transform. Fingerprint data is first converted to a binary image. Then a multi-level 2-D wavelet transform is performed. Vertical and horizontal subbands of the transformed data show typical energy distribution patterns relevant to the fingerprint categories. The proposed method with moderate level of wavelet transform is successful in classifying fingerprints into 5 different types. Finer classification is possible by higher frequency subbands and closer analysis of energy distribution.

• Journal of Environmental Science International
• /
• v.20 no.9
• /
• pp.1141-1149
• /
• 2011

The three-dimensional hydrodynamic model was simulated to understand coastal sea front of formation and seasonal variation in the Southern Sea of Korea. In this study, we used to concept of stratification factor, to realize seasonal distribution of stratification coefficient which of seasonal residual flow, considered with, tide, wind and density effect. Tidal current tends to flow westward during the flood and eastward during ebb. The current by the wind stress showed to be much stronger the coastal than the offshore area in the surface layer. And the current by the horizontal gradient of water density showed to be relatively weak in the coastal area, with little seasonal differences. On the other hand, the flow in the offshore area showed results similar to that of the Tsushima Warm Current. The stratification factor (SHv) was calculated by taking into account the total flow of tide, wind and density effect. In summer, the calculated SHv distribution ranged from 2.0 to 2.5, similar to that of the coastal sea front. The horizontal temperature gradient showed to be strong during the winter, when the vertical stratification is weak. On the other hand, the horizontal gradient became weak in summer, during which vertical stratification is strong. Therefore, it is presume that the strength of vertical stratification and the horizontal temperature gradient affect the position of the coastal sea front.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.477-485
• /
• 2012

Fluid flow and heat transfer in horizontal ducts are strongly coupled with large changes in thermodynamic and transport properties near the critical region as well as the gravity force. Numerical analysis has been carried out to investigate convective heat transfer in horizontal rectangular ducts for water near the thermodynamic critical point. Convective heat transfer characteristics, including velocity, temperature, and the properties as well as local heat transfer coefficients along the ducts are compared with the effect of proximity on the critical point. When there is flow acceleration because of a density decrease, convective heat transfer characteristics in the ducts show transition behavior between liquid-like and gas-like phases. There is a large variation in the local heat transfer coefficient distributions at the top, side, and bottom surfaces, and close to the pseudocritical temperature, a peak in the heat transfer coefficient distribution resulting from improved turbulent transport is observed. The Nusselt number distribution depends on pressure and duct aspect ratio, while the Nusselt number peak rapidly increases as the pressure approaches the critical pressure. The predicted Nusselt number is also compared with other heat transfer correlations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.41-51
• /
• 2004

In this paper, the beam steering dipole phased array antenna systems for IMT-2000 base station have been designed. The designed beam steering dipole phased array antenna systems are constituted by the antenna part and the beam steering control system part. The antenna part is designed by the proposed flat dipole for the broadband characteristics, and the 8${\times}$8 dipole array antenna is constructed by the proposed flat dipole for the directional radiation pattern. Besides the vertical power divider is designed for the vertical power distribution. The beam steering control system part is designed the horizontal power divider for the horizontal power distribution, the 4-bit phase shifters and the driving circuit of phase shifters for the horizontal beam tilting. In order to evaluate a performance of the designed antenna systems, they were fabricated and the radiation characteristics were measured. From the measured results, we found that the horizontal beams were tilted by the each control signals, and the measured radiation characteristics showed good agreement with the design goals.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.19-29
• /
• 2004

In this paper, the beam steering dipole phased array antenna systems for IMT-2000 base station have been designed. The designed beam steering dipole phased array antenna systems are constituted by the antenna part and the beam steering control system part. The antenna part is designed by the proposed flat dipole for the broadband characteristics, and the 8${\times}$8 dipole way antenna is constructed by the Proposed flat dipole for the directional radiation pattern. Besides the vertical Power divider is designed for the vertical power distribution. The beam steering control system part is designed the horizontal power divider for the horizontal power distribution, the 4-bit phase shifters and the driving circuit of phase shifters for the horizontal beam tilting. In order to evaluate a performance of the designed antenna systems, they were fabricated and the radiation characteristics were measured. From the measured results, we found that the horizontal beams were tilted by the each control signals, and the measured radiation characteristics showed good agreement with the design goals.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.449-458
• /
• 2010

This study attempted to investigate the effect of panel thickness on the horizontal density distribution (HDD) of medium density fiberboard (MDF) in a destructive way. Full size MDF panels with five different thicknesses such as 2 mm, 4.5 mm, 9 mm, 18 mm and 30 mm were cut into two different specimen sizes, i.e., $500{\times}500\;mm$ and $120{\times}120\;mm$ to measure the HDD. In general, the overall density of MDF panel diminished as the thickness increased, showing the highest density for the thinnest MDF panels. The HDD variation was significant for the samples of smaller specimen size ($120{\times}120\;mm$). MDF panel thickness significantly influenced to the HDD, which increased as the thickness decreased. In addition, the thinner panels showed much wider range in the HDD than those of thicker panels. The coefficient of variation (COV) of HDD also followed a similar trend to the panel density as the thickness increased. In summary, MDF panel thickness had a significant impact on the HDD within a panel. The sample size also showed a considerable effect to the HDD of MDF panels.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.827-833
• /
• 1995

Temperature distribution tests for a water cascading horizontal retort utilizing superheated water with overpressure as a heating medium were carried out under three different loading conditions, that is, empty(P-0), half-fully(P-3000) and fully(P-6000) loaded operating conditions. Tank volume and full loading capacity of sterilizer used for this study were about 5,900 liter and 1,140 kg(6000 pouches having 190 g weight each), respectively. Set point condition for sterilization was $122^{\circ}C$, 23 minutes and pressure was maintained in the range of $1.8{\sim}2.0\;kg/cm^2$ during sterilization. For each experiment, time-temperature data and F values were obtained from temperature microprocessor($F_0$ monitor). There were significant variations in the temperature distribution at different positions in the sterilizer. The temperature distribution was also affected by the pouch loading condition significantly. The application of the temperature distribution test to a product (retort pouched curry sauce) was conducted at the fully(P-6000) loading condition. Although heat transfer parameters($f_h\;and\;f_c$), and F values were varied with the position of sterilizer, sensory evaluation showed that the temperature distribution of the sterilizer used in this study didn't affect the quality of retorted curry sauce.