• Water for future
• /
• v.16 no.4
• /
• pp.221-236
• /
• 1983

In semi-enclosed shallow sea areas typified by the Yellow sea and the East China Sea, currents and sea surface variations are predominantly tidal. During the recent years two-dimensional numerical hydrodynamic model of the Yellow Sea and the East China Sea has been developed, based on the vertically-integrated equations of motion and continuity, capable of reproducing amplitudes and phases of the principal components of tides to satisfiable accuracy. As a subsequent development a three-dimensional hydrodynamical nymerical model covering the Yellow Sea and the East China Sea has been formulated to investigate the vertical distribution of horizontal tidal current and the response of the continented to investigate the vertical distribution of horizontal tidal current and the response of the continental shelf sea to steady uniform wind stress field imposed over the surface. Features of the M2 tidal current and the wind-induced three-dimensional current structure determined from the computation have been examined and discussed.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.123-128
• /
• 2012

Computer simulation of buildings and solar energy systems is being used increasingly in energy assessments and design. The purpose of our work is to predict the surface temperature on inclined surfaces based on ISO-TRY typical weather data. To reach this goal, three studies were performed. They consisted of quantifying the accuracy of various well-known three models. The first type of models calculated diffuse horizontal irradiations from global ones and the second type models computed global irradiations on inclined planes from diffuse and global components on a horizontal surface. The third type of model calculated long-wave radiation and surface temperature from ISO-TRY typical weather data. The proposed model can provide an alternative to building designers in estimating the surface temperature and solar irradiation on inclined surfaces where only the typical meteorological data are available.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.581-585
• /
• 2012

This paper proposes an adaptive binarization algorithm which is highly effective for a degraded document image including printed Hangul and Chinese characters. Because of the attribute of character composed of thin horizontal strokes and thick vertical strokes, the conventional algorithms can't easily extract horizontal strokes which have weaker components than vertical ones in the degraded document image. The proposed algorithm solves the conventional algorithm's problem by adding a vertical-directional reference adaptive binarization algorithm to an omni-directional reference one. The simulation results show the proposed algorithm extracts well characters from various degraded document images.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.8
• /
• pp.5-11
• /
• 2014

The objective of this paper is to develop a rational reliability analysis procedure for the LRFD design provisions of bridge substructures. A bridge abutments is considered in this study. The reliability analysis is applied to determine the relationship between the major design parameters for bridge abutment and reliability index. The considered load components include dead load, vertical and horizontal earth pressure, earth surcharge, and vehicle live load. Several limit states are considered: foundation bearing capacity, sliding, and overturning. The analysis results show that the most important parameter in the reliability analysis is the effective stress friction angle of the soil. The reliability indices are calculated using Monte Carlo simulations for a selected bridge abutment. The results of the sensitivity analysis indicate that reliability index is most sensitive with regard to resistance factor and horizontal earth pressure factor.

• Smart Structures and Systems
• /
• v.22 no.4
• /
• pp.383-397
• /
• 2018

Traditional base isolation systems focus on isolating the seismic response of a structure in the horizontal direction. However, in regions where the vertical earthquake excitation is significant (such as near-fault region), a traditional base-isolated building exhibits a significant vertical vibration. To eliminate this shortcoming, a rocking-isolated system named Telescopic Column (TC) is proposed in this paper. Detailed rocking and isolation mechanism of the TC system is presented. The seismic performance of the TC is compared with the traditional elastomeric bearing (EB) and friction pendulum (FP) base-isolated systems. A 4-storey reinforced concrete moment-resisting frame (RC-MRF) is selected as the reference superstructure. The seismic response of the reference superstructure in terms of column axial forces, base shears, floor accelerations, inter-storey drift ratios (IDR) and collapse margin ratios (CMRs) are evaluated using OpenSees. The results of the nonlinear dynamic analysis subjected to multi-directional earthquake excitations show that the superstructure equipped with the newly proposed TC is more resilient and exhibits a superior response with higher margin of safety against collapse when compared with the same superstructure with the traditional base-isolation (BI) system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.542-549
• /
• 2008

The evaporation heat transfer coefficient and pressure drop of R-22 and R-407C in a horizontal copper tube were investigated experimentally. The main components of the refrigerant loop are a receiver, a compressor, a mass flow meter, a condenser and a double pipe type evaporator (test section). The test section consists of a smooth copper tube of 6.4 mm inner diameter. The refrigerant mass fluxes were varied from 100 to $300\;kg/m^2s$ and the saturation temperature of evaporator were $5^{\circ}C$. The evaporation heat transfer coefficients of R-22 and R-407C increase with the increase of mass flux and vapor quality. The evaporation heat transfer coefficients of R-22 is about $5.68{\times}46.6%$ higher than that of R-407C. The evaporation pressure drop of R-22 and R-407C increase with the increase of mass flux. The pressure drop of R-22 is similar to that of R-407C. In comparison with test results and existing correlations, correlations failed to predict the evaporation heat transfer coefficient of R-22 and R-407C. therefore, it is necessary to develope reliable and accurate predictions determining the evaporation heat transfer coefficient of R-22 and R-407C in a horizontal tube.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.32-40
• /
• 2004

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design for axisymmetric products. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system is composed of four main modules. The process planning and the die design modules consider several factors, such as the complexities of preform geometry, punch and die profiles, specifications of available multi former, and the availability of standard parts. They can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution on the level of the required forming loads by controlling the forming ratios. Especially in die design module an optimal design technique and horizontal split die were investigated for determining appropriate dimensions of components of multi-former die set. It is constructed that the proposed method can be beneficial for improving the tool life of die set at practice.

• Structural Engineering and Mechanics
• /
• v.35 no.3
• /
• pp.335-348
• /
• 2010

Cutouts are often provided in structural and aircraft components for ventilation, for access, inspection, electric lines and fuel lines or sometimes to lighten the structure. This paper addresses the effects of cutout shape (i.e., circular, square, diamond, elliptical-vertical and elliptical-horizontal) and size on buckling and postbuckling response of quasi-isotropic (i.e., $(+45/-45/0/90)_{2s}$) composite laminate under uni-axial compression. The finite element method is used to carry out the investigation. The formulation is based on first order shear deformation theory and von Karman's assumptions are used to incorporate geometric nonlinearity. The 3-D Tsai-Hill criterion is used to predict the failure of a lamina while the onset of delamination is predicted by the interlaminar failure criterion. It is observed that for the smaller size cutout area there is no significant effect of cutout shape on load-deflection response of the laminate. It is also concluded that the cutout size has substantial influence on the buckling and postbuckling response of the laminate with elliptical-horizontal cutout, while this effect is observed to be the least in case of laminate with elliptical-vertical cutout.

• International Journal of High-Rise Buildings
• /
• v.8 no.2
• /
• pp.137-154
• /
• 2019

Singapore has seen a phenomenal and an unprecedented transformation from a swampland to a high density urban environment since its independence in 1965, made possible largely and single-handedly by the sustained efforts of its government. Indeed, urban space is a key vehicle for achieving urban social, environmental, economic, and cultural sustainability. The dense urban context in Singapore has seen an emergence and increase in elevated spaces in the form of sky-gardens, sky-bridges and sky-courts in a range of building types, seemingly seeking to tie together the different horizontal and vertical components of the city. This paper, therefore, examines the effectiveness of elevated urban spaces and pedestrian networks in Singapore and their ability to contribute to the horizontal to vertical transitions, and consequently to the urban vitality and accessibility. It does this through the analysis of two key developments: Marina Bay Sands and the Jurong Gateway. In particular, it considers the implications of certain constraints placed on urban spaces by their inherent location at height, in addition to the familiar privatization of public spaces, over-management of spaces, and their somewhat utilitarian characteristics. The paper argues that some of these issues may pose detrimental effects on the publicness of these spaces that in turn may lead to such spaces being underused and therefore adding redundancies and further stress to Singapore's urban land. Finally, the paper outlines key strategies that may help overcome the aforementioned issues, including the disjuncture associated with elevated spaces such that they may become a seamless extension of the urban spaces on ground.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.5
• /
• pp.853-872
• /
• 2023

This study analyzed the body shape of adult women aged 20 to 59 with a waist and hip circumference difference of 22.00 cm or more to characterize the lower body shape of women with slender waist. The researchers analyzed the data using SPSS 26.0. Among the lower body measurements of women with slender waists, the waist circumference was 70.79 cm and the hip circumference was 95.25 cm, with a difference of 24.56 cm between the waist and hip circumferences. We categorized the components of a slender waist body type into four factors: lower body horizontal, lower body vertical, lower calf horizontal, and hip and crotch length. We categorized women with slender waists into four body types: slender long crane legs, short thick lamb legs, short thin ladder legs, and thick long pole legs. In their twenties, many people have slender, long-legged lower body, but as they age, they are more likely to have thicker lower bodies and short, thin ankles. Body types with slender waist had larger proportions of abdominal and hip dimensions in the width, circumference, and thickness categories based on waist dimensions than those with average or thick waists.