DOI QR코드

DOI QR Code

Evaporation Heat Transfer and Pressure Drop of Mixture Refrigerant R-407C

혼합냉매 R-407C의 증발 열전달과 압력강하

  • 노건상 (동명대학교 냉동공조공학과) ;
  • 오후규 (부경대학교 기계공학부 냉동공조공학과) ;
  • 손창효 (부경대학교 기계공학부)
  • Published : 2008.05.31

Abstract

The evaporation heat transfer coefficient and pressure drop of R-22 and R-407C in a horizontal copper tube were investigated experimentally. The main components of the refrigerant loop are a receiver, a compressor, a mass flow meter, a condenser and a double pipe type evaporator (test section). The test section consists of a smooth copper tube of 6.4 mm inner diameter. The refrigerant mass fluxes were varied from 100 to $300\;kg/m^2s$ and the saturation temperature of evaporator were $5^{\circ}C$. The evaporation heat transfer coefficients of R-22 and R-407C increase with the increase of mass flux and vapor quality. The evaporation heat transfer coefficients of R-22 is about $5.68{\times}46.6%$ higher than that of R-407C. The evaporation pressure drop of R-22 and R-407C increase with the increase of mass flux. The pressure drop of R-22 is similar to that of R-407C. In comparison with test results and existing correlations, correlations failed to predict the evaporation heat transfer coefficient of R-22 and R-407C. therefore, it is necessary to develope reliable and accurate predictions determining the evaporation heat transfer coefficient of R-22 and R-407C in a horizontal tube.

Keywords

References

  1. E. Torrella, J. N. Esbri and R. Cabello, 'Boiling heat transfer coefficient variation for R407C inside horizontal tubes of a refrigerating vapour compression plant's shell and tube evaporator', Applied Energy, Vol. 83, No. 3, pp. 239-252, 2006 https://doi.org/10.1016/j.apenergy.2005.01.010
  2. W. Targanski and J. Cieslinski, 'Evaporation of R407C/oil mixtures inside corrugated and micro-fin tubes', Applied Thermal Engineering, Vol. 27, No. 13, pp. 2226-2232, 2007 https://doi.org/10.1016/j.applthermaleng.2005.07.026
  3. C. Aprea, A. Greco and A. Rosato, 'Comparison of R407C and R417A heat transfer coefficients and pressure drops during flow boiling in a horizontal smooth tube', Energy Conversion and Management, In Press, Corrected Proof, Available online 22 January 2008
  4. E. A. Vineyard and J. K. Sand,'Evaluation of nonazeotropic refrigerant mixtures for capacity modulation', DOE/ORNL Heat Pump Conference Proceeding, pp. 47-54, 1998
  5. S. J. Kline and F. A. McClintock, 'Describing Uncertainties in Single Sample Experiments', Mechanical Engineering, Vol. 75, No. 1, pp. 3-12, 1953
  6. M. O. McLinden, S. A. Klein, E. W. Lemmon, and A. P. Peskin,'NIST Thermodynamic Properties and Refrigerant Mixtures Database (REFPROP)', Version 6.01, National Institute of Standards and Technology, Gaithersburg, MD, U.S.A., 1998
  7. Y. Taitel and A. E. Dukler,'A model for predicting flow regime transitions in horizontal and near horizontal gas-liquid flow', AIChE J, Vol. 22, pp. 47-55, 1976 https://doi.org/10.1002/aic.690220105
  8. K. Hashizume,'Flow pattern and void fraction of refrigerant two-phase flow in a horizontal pipe', Bullettin of JSME, Vol. 26, No. 219, pp. 597-602, 1983
  9. J. U. Han, S. J. Kim, D. S. Jung and Y. I. Kim, Flow boiling heat transfer characteristics of R22 alternative refrigerants in a horizontal smooth tube, Int. J. of Air-Conditioning and Refrigeration, Vol. 13, No. 4, pp. 242-251, 2001
  10. C. Aprea, F. de Rossi and A. Greco, 'Experimental evaluation of R22 and R407C evaporative heat transfer coefficients in a vapour compression plant', International Journal of Refrigeration, Vol. 23, pp. 366-377, 2000 https://doi.org/10.1016/S0140-7007(99)00068-7
  11. K. E. Gungor and R. H. S. Winterton, Simplified general correlation for saturated flow boiling and comparison with data, Chem. Eng. Res. Dev., Vol. 65, pp. 148-156, 1987
  12. S. G. Kandlikar, A general correlation for saturated two-phase flow boiling heat transfer inside horizontal and vertical tubes, J. of Heat Transfer, Vol. 112, pp. 219-228, 1989 https://doi.org/10.1115/1.2910348
  13. D. S. Jung, M. McLinden, R. Radermacher and D. Didion, A study of flow boiling heat transfer with refrigerant mixtures, Int. J. of Heat and Mass Transfer, Vol. 32, pp. 1751-1764, 1989 https://doi.org/10.1016/0017-9310(89)90057-4
  14. M. Shah, A new correlation for heat transfer during boiling flow through pipes, ASHRAE Transaction, Vol. 82, No. 2, pp. 66-86, 1976