• 폴리머
• /
• 제35권6호
• /
• pp.531-536
• /
• 2011

블록 공중합체/단일중합체 블렌드에서 단일중합체의 농도와 분자량 변화에 따른 단일중합체의 분포 경향을 알아 보았다. 중수소화 폴리(메틸 메타크릴레이트) 또는 폴리스티렌을 중수소화 폴리스티렌-폴리(메틸 메타크릴레이트) 이중 블록 공중합체에 20 wt%까지 혼입하였다. 시료들은 소각 X-선 산란, 중성자 반사율 및 투과 전자 현미경으로 조사하였다. 실리콘 웨이퍼에 스핀 코팅하여 얇은 필름 상으로 제조한 블록 공중합체는 기질 표면에 대해 평행하게 배향된 라멜라 모폴로지를 형성하였다. 블록 공중합체의 미세 도메인 구조는 단일중합체의 부가에 의해 상당히 교란되었다. 그 결과로 단일중합체의 농도가 15 wt% 이상인 경우에는 배열 질서도가 낮은 라멜라 모폴로지가 나타났다. 단일공중합체의 농도나 분자량이 증가하면 단일중합체가 미세 도메인을 불균일하게 팽윤시키면서 보다 많은 단일중합체가 미세 도메인의 중앙 부위로 이동하였다.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.69-72
• /
• 2003

A homopolymer having pendent t-Boc-protected quinizarin moieties has been prepared for patterned fluorescence images. The homopolymer P(t-BQN (2-norbornenylmethyl di-tert-butoxycarbonylquinizarin)) 5 was prepared by palladium-catalyzed addition polymerization. The t-Boc-protecting groups of the polymer were efficiently removed during chemical amplification process and revealed original properties of quinizarin, allowing patterned fluorescence images in the polymer film.

• Elastomers and Composites
• /
• 제14권1호
• /
• pp.7-12
• /
• 1979

Graft copolymerization of methlymethacrylate(MMA) onto sodium alginate(SA) aqueous solution by sodium metaperiodate$(NaIO_4)$ as an initiator was carried out with the variation of the reaction time, the reaction temperature and the concentrations of initiator and monomer. The results obtained were as follows: 1. SA was easily separated from the reaction mixture of homopolymer, graft polymer and sodium alginate ungrafted by the treatment of concentrated boiling $Na_3PO_4$, solution with the small amount of $Na_2SO_3$ to the mixture and then isolated as the acid form by acidifying the salts solution containing SA. 2. The amount of graft polymer was larger than that of homopolymer below $70^{\circ}C$ whereas above $70^{\circ}C$ the amount of homopolymer was larger. 3. The sum of each amount of graft polymer ana homopolymer was always increased with increase of the reaction time, the reaction temperature and the concentrations of initiator and monomer. 4. With increase of the concentration of initiator, the graft efficiency was increased below $70^{\circ}C$ while decreased above $70^{\circ}C$. 5. Graft copolymerization of MMA onto SA in aqueous solution was carried out without initiator.

• 공업화학
• /
• 제4권2호
• /
• pp.349-357
• /
• 1993

Hydroxy-difunctional polyarylate(PAR) 올리고머와 toluene diisocyanate를 반응시켜 합성한 고분자 활성체를 사용하여 ${\varepsilon}$-caprolactam을 음이온 중합하여 다양한 블록길이의 PAR-nylon 6 블록공중합체들을 합성하였다. 합성한 블록공중합체들의 열적성질을 differential scanning calorimeter(d.s.c.)로 측정한 결과, 블록공중합체를 구성하는 PAR 블록과 nylon 6 블록은 부분적 상용성을 가졌으며, 그 정도는 블록의 길이가 짧을수록 컸다. PAR-nylon 6 블록공중합체와 PAR 혹은 nylon 6 homopolymer와의 이원블렌드에서 PAR homopolymer와 PAR 블록, nylon 6 homopolymer와 nylon 6 블록 사이의 분자수준의 섞임을 시사하는 거동을 d.s.c.로 관찰할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.276-276
• /
• 2013

Time-Of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS) and Atomic Force Microscopy (AFM) are the useful instruments to measure nanostructures of material surfaces. Surface pattern formation in blending homopolymer and diblock copolymer films was investigated as a function of film thickness and annealing conditions. In this study, surface structures of blending homopolymer [deuterated polystyrene (Mn 20,000), poly (methyl methacrylate) (Mn 18,000)] and diblock copolymer [Poly (deuteratedstyrene(d8)-b-methyl methacrylate) (Mn 19,500-18,100)] films were observed. The AFM result indicated that the nanostructures and film thickness depended on temperature, concentration and solvent. TOF-SIMS depth profiling was obtained for the lamellar morphology of symmetric dPS-b-PMMA which is found to orient parallel to the surface of the substrate. Elemental and molecular depth profiles measured in the negative ion mode by a Cs+ primary ion beam demonstrate variations in hydrogen, deuterium, carbon, oxygen, hydrocarbons and deuterated hydrocarbons within the diblock copolymer according to the depth.

• Journal of Photoscience
• /
• 제9권3호
• /
• pp.57-63
• /
• 2002

A homopolymer containing anthracene groups, poly[6-(9-anthryloxy)hexyl methacrylate] (PAn) was prepared and the effect of oxygen on its photochemical reaction was studied by UV and IR absorption spectroscopy in order to understand its photochemical behavior. Photochemical reaction of the PAn in THF solution under an atmosphere of air resulted in the formation of endoperoxide at the beginning stage of reaction followed by photodimerization reaction after all the oxygen was consumed, whereas photodimerization and endoperoxide formation took place concomitantly in the film state. The photoreversible reaction of the anthracene photodimer groups in the polymer by photolysis with 254 nm UV light was not efficient. The IR absorption spectral changes of the PAn film upon irradiation indicate that various photooxidation products were produced in the atmosphere of air.

• Bulletin of the Korean Chemical Society
• /
• 제16권5호
• /
• pp.443-449
• /
• 1995

N-(Isopropyloxycarbonyloxy)maleimide (iPOCMI) has been synthesized and polymerized to give both the homopolymer and copolymers with substituted styrenes. These polymers were readily deprotected by thermolysis of the isopropyloxycarbonyl (iPOC) groups to provide the corresponding N-hydroxymaleimide (HOMI) polymers. The homopolymer and styrenic copolymers of iPOCMI were radically obtained in higher conversion and higher molecular weight than those obtained by direct polymerizations of N-hydroxymaleimide. The homopolymer of iPOCMI was transformed into poly(N-hydroxymaleimide)P(HOMI) by thermolysis of iPOC groups at 205 $^{\circ}C$ with concurrent release of propene and carbon dioxide. The copolymer of iPOCMI and styrene was thermally deprotected to the copolymer of HOMI and styrene at 235 $^{\circ}C.$ The mass loss was 28% and the Tg of the resulting copolymer was 250 $^{\circ}C.$ The thermal deprotection readily provided the desired, polar HOMI polymers which have Tgs above 240 $^{\circ}C.$ The deprotection was accompanied by large changes in aqueous base solubility.

• Journal of Microbiology and Biotechnology
• /
• 제7권6호
• /
• pp.391-396
• /
• 1997

Two series of carbon sources, linear primary $C_1$~$C_9$ alcohols and linear $C_2$~$C_{10}$ monocarboxylic acids were tested for PHA synthesis in Paracoccus denitrificans. The results showed that the growth-associated synthesis of PHA could be referred only to the carbon sources with odd number of carbon except methanol. For all carbon sources with even number of carbon, nitrogen limitation was required to induce PHA synthesis in P. denitrificans. Poly(3-hydroxyvalerate)[P(3HV)] homopolymer was synthesized from $C_5$, $C_7$, and $C_9$ while growing in the presence of nitrogen, but the nitrogen depletion in the later growth period incorporated 3-hydroxybutyrate(3HB) unit into the polymer chain. The optimum C/N ratio for P(3HV) homopolymer production was found to be 10 when the strain was grown on 10 ml/l of valeric acid for 96 h. P. denitrificans synthesized P(3HB-co-3HV) copolymers from n-hexanoic and n-octanoic acid. The microstructural characterics of the P(3HB-co-3HV) copolymer from n-propanol was investigated using $^13C$-nuclear magnetic resonance spectroscopy, showing a structural heterogeneity.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.539-544
• /
• 2010

We have synthesized new blue electroluminescent polyalkylfluorene-based copolymers [poly(F-co-Py)x:y, where x:y = 99:1 or 95:5 mole ratios] containing the hole-injecting pyrazole derivative [3,3'-(4,6-bis(octyloxy)-1,3-phenylene)bis(1,5-diphenyl-4,5-dihydro-1H-pyrazole] through Ni(0) mediated polymerization, and their electroluminescent properties were investigated. Electroluminescent (EL) devices were fabricated with ITO / PEDOT:PSS (110 nm) / copolymers or PF homopolymer (80 nm) / Ca (50 nm) / Al (200 nm) configuration. Each EL device constructed from the copolymer exhibited significantly enhanced brightness and efficiency compared with a device constructed from the PF homopolymer. The EL device constructed with poly(F-co-Py)99:1 exhibited the highest luminous efficiency and brightness (0.95 cd/A and $2,907\;cd/m^2$, respectively). The achieved luminous efficiency was an excellent result, providing almost a 4-fold improvement on the efficiency obtainable with the a PF homopolymer device. This enhanced efficiency of the copolymer devices results from their improved hole injection and more efficient charge carrier balance, which arises from the HOMO level (~5.83 eV) of the poly(F-co-Py)99:1 copolymer, which is higher than that of the PF homopolyme (~5.90 eV).

• Bulletin of the Korean Chemical Society
• /
• 제16권9호
• /
• pp.873-885
• /
• 1995

The local structural and thermodynamical properties of blends A-B/H of a diblock copolymer A-B and a homopolymer H are studied using the polymer reference interaction site model (RISM) integral equation theory with the mean-spherical approximation closure. The random phase approximation (RPA)-like static scattering function is derived and the interaction parameter is obtained to investigate the phase transition behaviors in A-B/H blends effectively. The dependences of the microscopic interaction parameter and the macrophase-microphase separation on temperature, molecular weight, block composition and segment size ratio of the diblock copolymer, density, and concentration of the added homopolymer, are investigated numerically within the framework of Gaussian chain statistics. The numerical calculations of site-site interchain pair correlation functions are performed to see the local structures for the model blends. The calculated phase diagrams for A-B/H blends from the polymer RISM theory are compared with results by the RPA model and transmission electron microscopy (TEM). Our extended formal version shows the different feature from RPA in the microscopic phase separation behavior, but shows the consistency with TEM qualitatively. Scaling relationships of scattering peak, interaction parameter, and temperature at the microphase separation are obtained for the molecular weight of diblock copolymer. They are compared with the recent data by small-angle neutron scattering measurements.