• Korean Journal of Veterinary Research
• /
• v.40 no.3
• /
• pp.635-643
• /
• 2000

The aim of this study was to determine the effectiveness of carboxymethyl chitosan(CMC) solution on preventing intraperitoneal adhesions. In this study, 44 rats were divided into four groups ; an untreated control group and three experimental groups that were treated with 3 ml of 1, 2 or 3% CMC solution, respectively. The anti-mesenteric serosa of the ileum was exteriorized and then abraded in a standard manner by scraping with a scalpel blade to create homogenous petechial hemorrhagic surface over a $0.5{\times}1cm$ area. The adhesions were blindly assessed 2 weeks later by using a computerized tensiometer. The mean tensile strength(Newton) of formed adhesions was $2.48{\pm}0.88$ in control group, $1.86{\pm}0.56$ in the 1% CMC-treated group, $1.75{\pm}0.71$ in the 2% CMC-treated group and $1.55{\pm}0.60$ in the 3% CMC-treated group. The most favorable prevention against adhesion was achieved in the 3% CMC-treated group(p<0.01). We could conclude that CMC was effective on preventing the formation of postoperative small intestinal adhesions in the rat.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.4
• /
• pp.241-250
• /
• 1982

Time course of alkaline inorganic PPase activity with different parts of mung-bean sprout and some properties of partially purified enzyme from mung-bean leaves were investigated. The enzyme activity in leaf, root and cotyledon showed a tendency to increase at an early stage and then decrease gradually as germination continued. However, the crude homogenate of epicotyl showed the continuous decline of the enzyme activity but that of hypocotyl showed the continuous increase. In particular, the enzyme activity of leaf fraction was about 2-4 times as high as those of other fractions. The specific activity of the leaf enzyme was increased 86-fold, with a 23.9% yield, upon purification procedures. The purified enzyme from leaves had the Rm value of 0.35 and was not homogenous when judged by disc gel electrophoresis. Using tetrasodium pyrophosphate as a substrate, the apparent Km value for the partially purified enzyme was 0.89 mM. The enzyme was highly specific for $Mg^{2+}$ $CU^{2+}$ and $Fe^{2+}$ was also showed the activating effect of 56% and 55% with $Mg^{2+}$, respectively. However, $Ca^{2+}$), $Zn^{2+}$, $Mn^{2+}$, $Co^{2+}$ and $Ni^{2+}$ acted as inhibitors for the enzyme. The pH optimum for the enzyme shifted from 9.0 to 8.0 as the concentration of $Mg^{2+}$ was increased. The enzyme from mun-bean leaf was the most active at $50^{\circ}C$ and considerably stable on heat.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.659-666
• /
• 2003

Endoglucanase A from Clostridium thermocellum which is resistant to pancreatic proteinase was selected out of numbers cellulases then were expressed in lactobacilli. Recombinant lactobacilli expression vector, pSD1, harboring the endoglucanase gene from C. thermocellum under the control of its own promoter, was constructed. Both L. bulgaricus and L. plantarum were electrotransformed with pSD1. The endoglucanase activities of 0.120 and 0.144 U/ml were found in culture media of L. bulgaricus and L. plantarum containing pSD1, respectively. In vitro survival characteristics of the transformed lactobacilli were tested. Both L. bulgaricus and L. plantarum showed a similar resistance to low pH 3. Moreover, L. plantarum was bile-salt resistant in the presence of 0.3 and 1% oxgall. L. bulgaricus and L. plantarum showed a rather homogenous resistant pattern against the tested antibiotics. Both of the strains were resistant to amikacin, gentamicin, streptomycin, kanamycin, and colistin.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.33-42
• /
• 1988

The abdominal tumors in children are different from those of adult. These tumors are the third most common one, preceded by leukemia and brain tumors, in children under 15 years. X-ray examination is the most important method among diagnostic approaches. The role of diagnostic imaging is to identify the precise anatomic location and extent of pathologic process with the minimal number of imaging procedures. 23 cases of abdominal tumors were reviewed in respect of age incidence, site of origin, radiologic findings. The results are briefly summarized as follows : 1. Neuroblastoma was the most common(6 cases) and wi1m's tumor(5 cases), choledocal cyst(4 cases), ovarian mass(3 cases), hydronephrosis(2 cases), were descending order in frequency. 2. The most common site was retroperitoneum(60%). Kidney was the single most common site of origin. 3. Radiologic findings. The most common findings of plain radiography was ill defined soft tissue mass and this method was helpful in the presence of calcification especially in neuroblastoma. Ultrasonographic pattern was anechoic(cystic), echoic or mixed pattern, but this method provide less precise anatomical details, nevertheless ultrasonography wes paticullary useful imaging modality for the pediatric abdominal tumors. IVP findings were renal displacement, caliceopelvic system distortion or nonvisualization of kidney, these information was helpful in determining the location of tumors. CT scan showed homogenous or inhomogenous, cystic or solid, mass with their anatomic location. 4. Ultrasonography was the most widely used specific diagnostic method, but had limited value in detecting the anatomic location of tumors. CT scan was superior to ultrasound for determining the extent of tumors.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.18 no.2
• /
• pp.130-137
• /
• 2007

Objectives: Studies investigating problematic internet use have increased rapidly and have been focused on its causes, psychopathology, prevalence, characteristics and so on. However, there are few studies concerning the correlation between problematic internet use and youth health risk behavior. Therefore, the purpose of this study was to examine the relationship between problematic internet use and youth health risk behavior. Methods: A community sample of 632 high school students in grades 10 and 11 was collected for the survey. The sample was assessed using the Youth Risk Behavior Surveillance System(YRBSS) and Young's Diagnostic Questionnaire of Internet Addiction(YDQ). The subjects were classified into two groups: normal and problematic internet use, and the problematic internet use group was further divided into at-risk use and addiction groups. Results: There were 56 subjects(8.9%) in the internet addiction group and 56 subjects(8.9%) in the at-risk internet use group. The other 507 subjects were classified as normal. The subjects in the internet addiction group kissed more frequently and ate less fruit than those in the normal group. They also showed a relatively higher tendency to watch TV, ride in a car driven by a drunk driver and to carry a weapon than those in the normal group. There were no differences in health risk behaviors between the subjects in the internet addiction group and those in the at-risk internet use group, except for the possibility of riding in a car driven by a drunk driver. Conclusion: Unlike the normal group, there was very little difference in health risk behavior between the internet addiction group and the at-risk internet use group, which indicates that the addiction group and the at-risk internet use groups are homogenous. It is important to focus on the behavior of individuals in the at-risk group, and preventive measures should be taken in order to reduce the possibility of at-risk adolescents becoming addicted.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.2
• /
• pp.31-36
• /
• 2001

Teflon-like fluorocarbon thin film was deposited by using difluoromethane$(CH_2F_2$) added with Ar, $O_2$, and $CH_4$ on Si, $SiO_2$, TEOS, and Al substrate. The deposited thin film was characterized by static contact angles for measuring hydrophobicity in various additive gas ratio. temperature, and working pressure. In case of addition with Ar, the static contact angles decreased as additive gas ratio and power increased. But the static contact angles increased as working pressure increased. Specially, super-hydrophobic surface was obtained using the powder-like fluorocarbon thin film above 2 Torr. Added with $O_2$, the static contact angles decreased as the $O_2$ ratio and working pressure increased. And the static contact angles did not change in 100W, but hydrophilic surface was obtained at 200W. In case of addition of CE$_4$, static contact angles dramatically increased in $CH_4/CH_2F_2$ ratio 5. And continuous static contact angles obtained above ratio 5. As compare with previous experiments by thermal evaporation, the fluorocarbon thin film by plasma polymerization was obtained very low hysteresis. This results shows more homogenous surface by plasma polymerization than thermal evaporation process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.2 no.1
• /
• pp.1-21
• /
• 1973

The muscle of abalone, Notohaliotis discus (REEVE), and top-shell, Turbo cornutus Solander, were examined for protein composition. Then paramyosins which are known as one of the important structural protein of the muscle fibrils were isolated from the both muscle and their physico-chemical properties such as solubility, salting-out behaviour, intrinsic viscosity, ATPase activity, etc. involving amino acid composition and N-terminal amino acid residues were investigated to elucidate phylogenie characteristics more intensively from the viewpoint of comparative biochemistry. The analysis of protein composition resulted in the following estimations: abalone muscle; water-soluble protein of 22 %, salt-soluble protein, 34%, alkali-soluble protein, 20%, and stroma protein, 24%, and top-shell muscle; water-soluble protein of 16%, salt-soluble protein, 30%, alkali-soluble protein, 29%, and stroma protein, 25%, respectively. It is demonstrated in sedimentation analysis that paramyosin and myosin-actomyosin account for approximately 65% and 35% of the salt-soluble protein of abalone, and that the composition of both sediments in top-shell was approximately 70% and 30%, respectively. The ultracentrifugally homogenous paramyosins isolated essentially according to Bailey's ethanol-dried method from both of the muscle showed a $S^{\circ}_{20,w}$ of 3. 14s for abalone and a $S^{\circ}_{20,w}$ of 3.50s for top-shell. The both paramyosins were commonly rich in arginine, aspartic acid, and glutamic acid, while scarcely contained proline and tryptophan, in rough accord with the other paramyosins thus far reported. It is clear that these gastropod paramyosins showed of having the characteristic N-terminal amino acid residues such as N-aspartic acid, N-valine, N-serine, and N-threonine in common. The abalone paramyosin completely salted in with KCl beyond $0.35{\mu}$ and the top-shell paramyosin beyond $0.30{\mu}$. The abalone paramyosin was salted-out between 18% and 30% saturation of ammonium sulphate and the top-shell paramyosin between 22% and 29% saturation. The intrinsic viscosities at abalone and top-shell paramyosins at $25^{\circ}C$ were estimated respectively to be 3.1 dl/g and 2.6 dl/g showing somewhat higher than the values for some other paramyosins from lamellibranchs. In regard with the ATPase activity, the para myosin specimens did not exhibit any significant activity over through the pH conditions of 5 to 9.5. irrespective of the presence of $Ca^{++}$ or $Mg^{++}$. So was the case with the abalone paramyosin prepared by a slightly modified Bailey's wet-extraction method.

• Journal of Korean Academy of Nursing
• /
• v.18 no.1
• /
• pp.5-18
• /
• 1988

Herzberg and his associates concluded from their findings that job satisfaction consisted on two independent dimension ; the first dimension was related to job satisfaction, the second to job dissatisfaction. According to the Herzberg theory, the satisfiers are related to the nature of the work itself and the rewards that flow directly from the performance of that work. The dissatisfaction factors are associated with the individual's relation to the context or environment in which he works. The purpose of this study was to investigate selected factors which result in job satisfaction / dissatisfaction of nurses employed in general hospital. In a study of this nature, it is important that the population be as homogenous as possible in order to reduce the effects of the different environments and backgrounds on job satisfaction. A job satisfaction questionnaire developed by Slabitt et als. was used for this study. It contains 45 statements and utilizes a Likert type scale of 5. Participants were asked to select response which were congruent with their perceptions of the item. It was decided to conduct the study in one general hospital in Seoul. A sample of 505 clinical nurses were selected to participate in this study. The results of this study were as follows ; 1. The overall mean score for the 45 five-point scales of job satisfaction items was 2.945, showing that the subjects of this study were neither satisfied nor dissatisfied. 2. To identify the specific job related factors that result in Job satisfaction / dissatisfaction, the 45 items of job satisfaction were divided into 6 areas and the mean scores and % of agreement were compared. The specific job related factor that resulted in job satisfaction was the job status and those that resulted in job dissatisfaction were salaries, task requirements and organization requirements. But the areas of autonomy and interaction did not belong to either side of the specific job related factors. 3. To identify the relationship between the job satisfaction and the subject's general characteristic, data was analyzed using the t-test and the Pearson correlation coefficient. It was found that the relationship between the job satisfaction and the request for rotation and intention to remain on the job were statistically significant at .05 level, but the relationship between the job satisfaction and age, work experience, and educational background were nor statistically significant at the .05 level.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.341-353
• /
• 1995

Previous study had shown the diversities in the propriety for optimal bond strength on the concentration of the etchant. The aim of present study in vitro was to evaluate and compare the shear bond strength of orthodontic brackets to enamel and to measure the depth of etch on the phosphoric acid concentrations. A hundred and seventy six extracted bovine lower centrals were ground to yield flat surfaces and etched by the concentration $0%,\;5%,\;10%,\;20%,\;30%,\;40%,\;50%,\;60%,\;70%,\;80%\;and\;85\%$ of phosphoric acid respectively during 60 seconds. The shear bond strength of orthodontic brackets, the depth of etch and surface roughness of the enamel were measured, and scanning electron microscopic observations on the etched enamel surfaces were carried out. The data obtained from the very experiments were processed and statistically analyzed and evaluated. The gradual increase in the depth of etch to enamel as the accretion of the concentration of the phosphoric acid upto $40-50\%$ and decline henceforth were manifested. The surface roughness showed no correlation with the depth of etch, yet moderate correlation with the shear bond strength of brackets. Scanning electron microscopic investigation revealed that morphological patterns of the etched enamel surfaces for $5\%\;to\;40\%$ of concentrations were even and homogenous, and those for $50\%$ as well as $60\%$ exhibited the overetched and unhomogenous. The shear bond strengths kom $10\%\;to\;60\%$ of concentration showed no statistically significant differences. It was suggested that the shear bond strengths at $5\%\;and\;70\%$ were sufficient to tolerate the force levels of the ordinary orthodontic treatment notwithstanding to be significantly lower than those from $10\%\;to\;60\%$ phosphoric acid solution.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.3
• /
• pp.255-265
• /
• 2009

Recently many studies have been published on application of immediate loaded implants. However, the immediate loading protocol has not been well documented. The purpose of the present study was to evaluate the stress distribution between bone-implant interfaces and the effect of implant length in the anterior maxilla using 3 dimensional finite element analyses. The diameter 4.0 mm threaded type implants with different length(8.5 mm, 10.0 mm, 11.5 mm, 13.0 mm, 15.0 mm) were used in this study. The bone quality of anterior maxillary bone block was assumed to D3 bone. Bone-implant interfaces of immediately loaded implant were constructed using a contact element for simulating the non osseointegration status. For simplification of all the processing procedures, all of the material assumed to be homogenous, isotropic, and linearly elastic. The 178 N of static force was applied on the middle of the palatoincisal line angle of the abutment with $120^{\circ}$ angle to the long axis of abutment. Maximum von Mises stress were concentrated on the labial cortical bone of the implant neck area, especially at the cortical-cancellous bone interfaces. Compared the different length, highest peak stress value was observed at the 8.5 mm implants and the results indicated a tendency towards favorable stress distribution on the bone, when the length was increased. Presence of cortical bone was very important to immediate loading, and it appears that implants of a length more than 13 mm are preferable for immediate loading at the anterior maxilla.