• 한국재료학회지
• /
• 제33권1호
• /
• pp.21-28
• /
• 2023

The electromembrane process, which has advantages such as scalability, sustainability, and eco-friendliness, is used in renewable energy fields such as fuel cells and reverse electrodialysis power generation. Most of the research to visualize the internal flow in the electromembrane process has mainly been conducted on heterogeneous ion exchange membranes, because of the non-uniform swelling characteristics of the homogeneous membrane. In this study, we successfully visualize the electro-convective vortices near the Nafion homogeneous membrane in PDMS-based microfluidic devices. To reinforce the mechanical rigidity and minimize the non-uniform swelling characteristics of the homogeneous membrane, a newly developed swelling supporter was additionally adapted to the Nafion membrane. Thus, a clear image of electroconvective vortices near the Nafion membrane could be obtained and visualized. As a result, we observed that the heterogeneous membrane has relatively stronger electroconvective vortices compared to the Nafion homogeneous membranes. Regarding electrical response, the Nafion membrane has a higher limiting current and less overlimiting current compared to the heterogeneous membrane. Based on our visualization, it is assumed that the heterogeneous membrane has more activated electroconvective vortices, which lower electrical resistance in the overlimiting current regime. We anticipate that this work can contribute to the fundamental understanding of the ion transport characteristics depending on the homogeneity of ion exchange membranes.

• 소성∙가공
• /
• 제15권5호
• /
• pp.382-386
• /
• 2006

Preform design is an effective means of achieving the homogeneous deformation of workpiece materials and decreased load in metal forming. However, this approach has not been applied to equal channel angula. pressing (ECAP). In this paper, plastic deformation behavior of workpieces having four different preform shapes during ECAP was investigated using finite element analyses. The results indicated that a preform design of the workpiece head has a beneficial effect on homogeneous deformation, reducing the maximum pressing load at the initial stage and eliminating folding defects at strain concentration points.

• Geomechanics and Engineering
• /
• 제9권5호
• /
• pp.631-644
• /
• 2015

This article considers the problems of cylindrical bending of functionally graded plates in which material properties vary through the thickness. The variation of the material properties follows two power-law distributions in terms of the volume fractions of constituents. In addition, this paper considers orthotropic materials rather than isotropic materials. The traction-free condition on the top surface is replaced with the condition of uniform load applied on the top surface. Numerical results are presented to show the effect of the material distribution on the deflections and stresses. Results show that, all other parameters remaining the same, the studied quantities (stress, deflection) of P-FGM and E-FGM plates are always proportional to those of homogeneous isotropic plates. Therefore, one can predict the behaviour of P-FGM and E-FGM plates knowing that of similar homogeneous plates.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.20-21
• /
• 2006

Through different projects, CETIM and its scientific and industrial partners have evaluated the potential of the High Velocityy Compaction Technology in terms of materials and component shape. Various kinds of powder materials were studied: metals, ceramics and polymers. The HVC process was used with success to manufacture gears, large parts and multilevel components. Due to the high density of HVC parts, the green machining process enables shapes to be produced that would otherwise be impossible to compact and components to be produced with very hard sintered and homogeneous materials.

• 한국결정성장학회지
• /
• 제14권3호
• /
• pp.110-114
• /
• 2004

반응온도 $75^{\circ}C$에서 $Ca(OH)_2$ slurry 및 NaOH의 혼합용액에 $Na_2CO_3$ 수용액의 농도 및 첨가방법을 변화시키면서 아라고나이트 침강성 탄산칼슘의 생성거동을 관찰하였다. 이 반응에서 $Na^+$ 이온은 탄산칼슘 격자내의 $Ca^{2+}$ 이온 자리에 치환되어 칼사이트의 성장을 지연시키고, 특정방향으로의 결정성장이 진행되어 침상형 아라고나이트의 생성을 유리하게 하는 것을 알 수 있었다. 또한, $CO_3^{2-}$ 이온농도 조절에 의한 반응속도의 감소는 균일침전반응을 유도하고, $Na^+$ 이온의 치환능력을 증대시켜 아라고나이트의 생성 및 성장을 촉진하는 것으로 판단되었다.

• 한국분말재료학회지
• /
• 제13권5호
• /
• pp.321-326
• /
• 2006

Electronic packaging involves interconnecting, powering, protecting, and cooling of semiconductor circuits fur the use in a variety of microelectronic applications. For microelectronic circuits, the main type of failure is thermal fatigue, owing to the different thermal expansion coefficients of semiconductor chips and packaging materials. Therefore, the search for matched coefficients of thermal expansion (CTE) of packaging materials in combination with a high thermal conductivity is the main task for developments of heat sink materials electronics, and good mechanical properties are also required. The aim of this work is to develop copper matrix composites reinforced with carbon nanofibers. The advantages of carbon nanofibers, especially the good thermal conductivity, are utlized to obtain a composite material having a thermal conductivity higher than 400 W/mK. The main challenge is to obtain a homogeneous dispersion of carbon nanofibers in copper. In this paper, a technology for obtaining a homogeneous mixture of copper and nanofibers will be presented and the microstructure and properties of consolidated samples will be discussed. In order to improve the bonding strength between copper and nanofibers, different alloying elements were added. The microstructure and the properties will be presented and the influence of interface modification will be discussed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.368-368
• /
• 2009

• 공업화학
• /
• 제26권1호
• /
• pp.1-16
• /
• 2015

본 리뷰에서는 에너지분야 응용을 위해 사용된 이온교환막을 이용한 분리막 공정에 대하여 정리하였다. 이온교환막은 기능, 균일상, 불균일상과 같은 형태, 사용된 고분자의 종류에 따라 구분되었으며, 양이온 및 음이온 교환막을 제조하기 위한 다양한 방법에 대하여 논문을 참조하여 정리하였다. 이온교환막을 제조하기 위한 최신 연구결과 동향이 보고되었으며, 본 리뷰에서는 분리막의 제조 및 발전되어온 내용과, 분리막을 미래지향적 기술에 사용하기 위한 잠재적 응용분야에 대하여 논의하였다.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.503-509
• /
• 2004

Dispersion stabilities and photocatalytic activities of rutile $TiO_{2}$ powders with unique nano-structure synthesized by homogeneous precipitation process at low temperature(HPPLT) have been investigated in the acrylic resin containing fluorostyrene in the range of 0~0.16 mole. Isoelectric point of $TiO_{2}$ in the acrylic resin placed in the neutral region whereas that of $TiO_{2}$ in the water placed in the acidic region, indicating that zeta potential and agglomeration of $TiO_{2}$ powder is strongly dependent on the pH and the type of solvent. To prepare an adhesion, an acrylic resin containing fluorostyrene was synthesized by a radical polymerization. The adhesion of coating layer was increased with increasing fluorostyrene's contents without changing the dispersion stabilities and degrading photocatalytic properties.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.288-296
• /
• 2009

In this study, the silica-based hybrid material with high barrier property was prepared by incorporating ethylene-vinyl alcohol (EVOH) copolymer, which has been utilized as packaging materials due to its superior gas permeation resistance, during sol-gel process. In preparation of this EVOH/$SiO_2$ hybrid coating materials, the (3-glycidoxy-propyl)-trimethoxysilane (GPTMS) as a silane coupling agent was employed to promote interfacial adhesion between organic and inorganic phases. As confirmed from FT-IR analysis, the physical interaction between two phases was improved due to the increased hydrogen bonding, resulting in homogeneous microstructure with dispersion of nano-sized silica particles. However, depending on the range of content of added silane coupling agent (GPTMS), micro-phase separated microstructure in the hybrid could be observed due to insufficient interfacial attraction or possibility of polymerization reaction of epoxide ring in GPTMS. The oxygen barrier property of the mono-layer coated BOPP (biaxially oriented polypropylene) film was examined for the hybrids containing various GPTMS contents. Consequently, it is revealed that GPTMS should be used in an optimum level of content to produce the high barrier EVOH/$SiO_2$ hybrid material with an improved optical transparency and homogeneous phase morphology.