• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.3-44
• /
• 1999

This paper discusses the lateral behavior of single and group piles in homogeneous and non-homogeneous(two layered) soil. In the single pile, the model tests were conducted to investigate the effects on ratio of lower layer height to embedded pile length, ratio of soil modules of upper layer to lower layer, boundary rendition of pile head and tip, embedded pile length, pile construction condition, ground condition with saturate and moisture state in Nak-Dong river sand. Also, in the group pile, the model tests were to investigate the effects on spacing-to-diameter ratio of pile, pile array, ratio of pile spacing, boundary condition of pile head and tip, eccentric load and ground condition. The maximum bending moment and deflection induced in active piles were found to be highly dependent on the relative density, pile construction condition, boundary condition of pile head and tip. Based on the results obtained, it was found that the decrease of lateral bearing capacity in saturated sand was in the range of 31% - 53% as compared with the case of dry sand. Also, in the group pile, a spacing-to-diameter of 6.0 seems to be large enough to eliminate the group effect for the case of relative density of 61.8%, and 32.8%, and then each pile in such a case behaves essentially the same as a single pile. In this study, the program is developed by using the modified Chang method which used p - y method and the exact solution of governing equation of pile and it can be used to calculate the deflection, bending moment and soil reaction with FDM in non-homogeneous soil. In comparing the modified Chang method with field test results, the predict results shows better agreement with measured results in field tests.

• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.136-143
• /
• 2010

Realistic Modeling is to maximize the reality of the environment in which perception is made by virtual environment or remote control using two or more senses of human. Especially, the field of haptic rendering, which provides reality through interaction of visual and tactual sense in realistic model, has brought attention. Haptic rendering calculates the force caused by model deformation during interaction with a virtual model and returns it to the user. Deformable model in the haptic rendering has more complexity than a rigid body because the deformation is calculated inside as well as the outside the model. For this model, Gibson suggested the 3D ChainMail algorithm using volumetric data. However, in case of the deformable model with non-homogeneous materials, there were some discordances between visual and tactual sense information when calculating the force-feedback in real time. Therefore, we propose an algorithm for the Volume Haptic Rendering of non-homogeneous deformable object that reflects the force-feedback consistently in real time, depending on visual information (the amount of deformation), without any post-processing.

• 대한수학회지
• /
• 제55권5호
• /
• pp.1235-1255
• /
• 2018

We provide definitions for the helicoidal Killing field and the helicoid in arbitrary three-manifolds, and investigate helicoids and ruled minimal surfaces in homogeneous three-manifolds, mainly in $SL_2{\mathbb{R}}$ and Sol(3). In so doing we finish our classification of ruled minimal surfaces in homogeneous three-manifolds with the isometry group of dimension 4.

• Journal of Mechanical Science and Technology
• /
• 제15권8호
• /
• pp.1079-1089
• /
• 2001

This paper proposes J and CTOD estimation schemes applied to fracture toughness testing, covering typical homogeneous and bi-material specimens. Recommendations are based on the plastic limit analysis (either slip line field or finite element limit analyses), assuming the rigid plastic material behavior. The main outcome of the present study is that the J and CTOD estimation schemes (both codified and non-codified), recommended for homogeneous specimens, can be equally used for bi-material specimens with interface cracks. The effect of yield strength mismatch in bi-material specimens on the J-integral CTOD is discussed.

• 센서학회지
• /
• 제27권1호
• /
• pp.25-30
• /
• 2018

Closed-form analytical expressions and 3-dimensional normalized charts for the homogeneous sensing and surface sensing structures are derived to provide the conditions for the maximum sensitivity of integrated-optic biosensors based on evanescent-wave and stepindex planar optical waveguides. The analysis is made for transverse electric (TE) polarization mode, in both cases where the measurand is homogeneously distributed in the cover (namely, homogeneous sensing), and where it is an ultrathin film on the waveguide-cover interface (namely, surface sensing).

• 대한수학회보
• /
• 제59권6호
• /
• pp.1567-1594
• /
• 2022

In this article, we first introduce the notion of commuting Ricci tensor and pseudo-anti commuting Ricci tensor for Hopf hypersurfaces in the homogeneous nearly Kähler 𝕊³ × 𝕊³ and prove that the mean curvature of hypersurface is constant under certain assumptions. Next, we prove the nonexistence of Ricci soliton on Hopf hypersurface with potential Reeb vector field, which improves a result of Hu et al. on the nonexistence of Einstein Hopf hypersurfaces in the homogeneous nearly Kähler 𝕊³ × 𝕊³.

• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.555-563
• /
• 2016

Uniformity and leveled distributions of soil chemicals across paddy fields are critical to manage optimal crop yields, reduce environmental risks and efficiently use water in rice cultivation. In this study, an investigation of spatial distributions on soil chemical properties was conducted to evaluate the effect of land leveling on mitigation of soil chemical property heterogeneity from a remodeled paddy field. The spatial variabilities of chemical properties were analyzed by geostatistical analyses; semivariograms and kriged simulations. The soil samples were taken from a 1 ha paddy field before and after land leveling with sufficient water. The study site was located at Bon-ri site of Dalseong and river sediments were dredged from Nakdong river basins. The sediments were buried into the paddy field after 50 cm of top soils at the paddy field were removed. The top soils were recovered after the sediments were piled up. In order to obtain the most accurate spatial field information, the soil samples were taken at every 5 m by 5 m grid point and total number of samples was 100 before and after land leveling with sufficient water. Soil pH increased from 6.59 to 6.85. Geostatistical analyses showed that chemical distributions had a high spatial dependence within a paddy field. The parameters of semivariogram analysis showed similar trends across the properties except pH comparing results from before and after land leveling. These properties had smaller "sill" values and greater "range" values after land leveling than ones from before land leveling. These results can be interpreted as land leveling induced more homogeneous distributions of soil chemical properties. The homogeneous distributions were confirmed by kriged simulations and distribution maps. As a conclusion, land leveling with sufficient water may induce better managements of fertilizer and water use in rice cultivation at disturbed paddy fields.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.736-743
• /
• 2003

A process of 3-D particle image velocimetry, called here, as '3-D stereo PIV' was developed for the measurement of an illuminated slied section field of 3-D complex flows. The present method includes modeling of camera by a calibrator based on the homogeneous coordinate system, transfromation of the oblique-angled image to the right-angled image, identification of 2-D velocity vectors by 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criterior, and finally 3-D animation as the post processing. An experimental system was also used for the application of the proposed method. Three analog CCD cameras and an Argon-Ion Laser(300mW) for illumination were adopted to capture the wake flow behind a bluff obstacle.

• 한국자기학회지
• /
• 제26권5호
• /
• pp.159-167
• /
• 2016

초등학교 6학년 과학교과 영구자석 주위의 자기장에 대한 학습에서 나타나는 학생들의 자기장 개념 유형을 조사하였다. 그리고 학생들의 영구자석 주위의 자기장에 대한 오개념 개선을 위한 나침반을 사용하는 대안실험을 제안하였으며 학생들의 인지양식에 따른 효과를 비교하였다. 영구자석 주위에 철가루를 뿌려 관찰한 자기장에 대해 부분 분포 모형, 극 분리 모형, 균질 분포 모형, 장 모형의 4가지 개념 모형이 나타났으며, 영구자석과 나침반을 이용하여 자기장을 관찰한 실험에서는 철가루 실험에서 나타났던 자기장 모형들이 연속, 변형, 복잡화되었는데 극 분리 모형, 복합 균질 분포 모형, 장 모형의 3가지 자기장 개념 모형으로 나타났다. 대안실험을 통해서 올바른 자기장 개념의 형성 비율이 장의존적인 학생들에게 유의미하게 높은 것으로 나타났다.

• 한국해안해양공학회지
• /
• 제4권2호
• /
• pp.91-107
• /
• 1992

Heaps(1972)가 사용한 천해균질류에 대한 선형 기본방정식을 수심평균류속과 해수면변리를 계산하는 External mode와 수심변이 유속을 계산하는 Internal mode로 분리시킨 다음, Internal mode식에 Galerkin Method를 적용하였다. Internal mode유속을 수평좌표, 시간에 따라 변하는 계수와 대직좌표에 따라 변하는 Basis function들의 곱의 형태로 선형전개하며, 난류확산계수를 포함하는 2차미분항으로부터 해수면에 Homogeneous boundary condition과 해저면에 Sheared boundary condition이 가해지는 Sturm-Liouville system을 구성, Eigenfunctions 해를 구하여 Basis function으로 사용하였다. 모델의 성능을 검토하기 위하여 수립된 모델을 정상균일풍이 가해지는 1차원 수노에 적용하여 Cooper and Pearce(1977)가 제시한 해저면 비활동조건하의 무한 및 유한수노 연직류원분포에 대한 해석각와 비교하였으며, North Sea 규모의 등수심 장방형 Basin(Heaps' Basin)에 적용하여 정상균일풍에 대한 Heaps(1972)의 계산결과와 비교하였다.