• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.432.2-432.2
• /
• 2014

Recently, colloidal core/shell type quantum dots lighting-emitting diodes (QDLEDs) have been extensively studied and developed for the future of optoelectronic applications. In the work, we fabricate an inverted CdSe/ZnS quantum dot (QD) based light-emitting diodes (QDLED)[1]. In order to reduce work function of indium tin oxide (ITO) electrode for inverted structure, a very thin (<10 nm) polyethylenimine ethoxylated (PEIE) is used as surface modifier[2] instead of conventional metal oxide electron injection layer. The PEIE layer substantially reduces the work function of ITO electrodes which is estimated to be 3.08 eV by ultraviolet photoemission spectroscopy (UPS). From transmission electron microscopy (TEM) study, CdSe/ZnS QDs are uniformly distributed and formed by a monolayer on PEIE layer. In this inverted QD LED, two kinds of hybrid organic materials, [poly (9,9-di-n-octyl-fluorene-alt-benzothiadiazolo)(F8BT) + poly(N,N'-bis (4-butylphenyl)-N,N'-bis(phenyl)benzidine (poly-TPD)] and [4,4'-N,N'-dicarbazole-biphenyl (CBP) + poly-TPD], were adopted as hole transport layer having high highest occupied molecular orbital (HOMO) level for improving hole transport ability. At a low-operating voltage of 8 V, the device emits orange and red spectral radiation with high brightness up to 2450 and 1420 cd/m2, and luminance efficacy of 1.4 cd/A and 0.89 cd/A, respectively, at 7 V applied bias. Also, the carrier transport mechanisms for the QD LEDs are described by using several models to fit the experimental I-V data.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.791-800
• /
• 2014

4-Chlorobenzoyl (CB) group-attached multi-walled carbon nanotube (c-MWNT) was prepared via a direct Friedel-Crafts acylation of MWNT with 4-chlorobenzoic acid (CBA) in a $P_2O_5$/poly(phosphoric acid) medium. c-MWNT with a maximum chlorine content of 5.3 wt% (CB group content of 20.9 wt%) was obtained by controlling the amount of CBA during the reaction. Using a self-condensation polymerization of 4-chlorobenzenethiol (CBT) to poly(phenylene sulfide) (PPS), MWNT-g-PPS was prepared by adding c-MWNT of chlorine content of 5.3 wt% during the self-polymerization of CBT and removing homo PPS after polymerization in order to increase the interfacial interaction between PPS and MWNT. Thermal and surface properties of the MWNT-g-PPS were characterized. The results showed that PPS was formed on the surface of c-MWNT by the condensation of c-MWNT and CBT.

• Membrane Journal
• /
• v.15 no.1
• /
• pp.15-21
• /
• 2005

The integrally skinned asymmetric PAN ultrafiltration membranes were annealed for reducing the pore size. The effect of the chemical structure of two PAN polymers (homo- and copolymer) on annealing was investigated. The annealing of PAN polymer was strongly affected by the chemical structure of the polymer. In other words, the annealing effect of the copolymer was much larger than that of the homopolymer due to its less rigid structure of the main chain. Before annealing, the membranes were usually preheated in water in terms of the complete removal of remained solvents in the membranes. The annealing effect was bigger when no preheating. However, the preheating of the membrane before annealing at high temperatures leads to an increase in the pore size of membranes. The surface of the membranes was slightly negative and the salt rejection of PAN nanofiltration membrane was in the following order: R(Na₂SO₄) > R(NaCl) > R(MgSO₄) > R(CaCl₂). This salt rejection behavior could be explained by the Donnan equilibrium and the electroneutrality.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2720-2724
• /
• 2013

Polynorbornenes prepared by vinyl addition pathway are known to have some desirable characteristics for wider application but they have some critical drawbacks such as brittleness, poor solubility and adhesion. In order to improve these drawbacks, extensive research for the successful homo- and copolymerization of polar functionalized norbornene with olefin has been carried out. Even though considerable advance has been achieved in the polymerization of polar functionalized monomers, successful catalytic systems for the homopolymerization of polar functionalized norbornene are rare. In this study, a novel successful catalytic system for the polymerization of polar functionalized norborene is proposed. This system employs Pd ${\beta}$-diketiminate/borate cocatalyst in water/organic mixed solvents and it is unique due to introduction of water as a component of solvents. Polymers obtained in this study show high Mw with narrow PDI. Effects of several reaction parameters to the polymer activity and properties are investigated and optimal catalytic system are proposed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.877-880
• /
• 2003

A new class of light-emitting poly(p-phenylenevinylene) (PPV) derivatives. poly(9,9-di-n-octyfluorenyl- 2,7-vinylene) (PFV) and its PPV copolymers, poly[(9,9-di-n-octylfluorenyl-2,7-vinylene)-co-(1,4-phenylenevinylene)]s [Poly(FV-co-PV)s] was synthesized through Gilch polymerization, and their light-emitting properties were investigated. The copolymers showed almost the same UV absorption and PL emission as the PFV homopolymer, regardless of copolymer composition. Interestingly, the EL spectra of these devices were similar to the PL spectra of the corresponding polymer film. However, the EL devices constructed from the poly(FV-co-PV)s showed 10 times higher efficiency than the devices constructed from the PFV homopolymer. This higher efficiency is possibly a result of better charge carrier balance in the copolymer systems due to the lower HOMO level (${\sim}5.5$ eV) of the poly(FV-co-PV)s in comparison to the PFV (${\sim}5.7$ eV).

• Journal of the Korean Chemical Society
• /
• v.60 no.3
• /
• pp.194-202
• /
• 2016

Two conjugated semiconducting copolymers consisting of 4,7-bis(4-(2-ethylhexyl)-2-thiophene)-2,1,3-benzothiadiazole (DTBT) and benzo[1,2-b:4,5-b']dithiophene with 5-(2-ethylhexyl)-2,2'-bithiophene (BDTBT) or 5-(2-ethylhexylthio)- 2,2'-bithiophene (BDTBT-S) were designed and synthesized as donor materials for organic photovoltaic cells (OPVs). Alkylthio-substituted PBDTBT-S-DTBT showed a higher hole mobility and lower highest occupied molecular orbital (HOMO) energy level (by 0.08 eV) than the corresponding alkyl-substituted PBDTBT-DTBT. An OPV fabricated using PBDTBT-S-DTBT showed higher V_OC and J_SC values of 0.83 V and 7.56 mA/cm², respectively, than those of a device fabricated using PBDTBT-DTBT (0.74 V) leading to a power conversion efficiency of 2.05% under AM 1.5G 100 mW/cm² illumination.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.182-183
• /
• 2008

We fabricated a pentacene thin film transistor with Poly-vinylalcohol (PVA) as a dielectric. And we used Poly(9-vinylcarbazole) (PVK) as a buffer layer to improve the electrical characteristics. PVK is a material used often host material for OLED device, as it has good film forming properties, large HOMO-LUMO(highest occupied molecular orbital-lowest unoccupied molecular orbital) bandgap. The performance of a OTFT device with PVA gate dielectric was improved by using the PVK. Field effect mobility, threshold voltage, and on-off current ratio of device with PVK layer were about 0.6 $cm^2$/Vs, -17V, and $5\times10^5$, respectively.

• Archives of Pharmacal Research
• /
• v.28 no.7
• /
• pp.756-760
• /
• 2005

Polyene macrolide amphotericin B (AmB) is the drug of choice for the treatment of disseminated fungal infections. However, because of its pronounced side effects, the drug has limited applicability. There are few interesting reports, which state that co-administration of the drug with homo-peptide of polyaspartic acid reduces the side effects of the drug. In our present study, an approach has been made to systematically synthesize low molecular weight heteropeptides consisting of L-aspartic acid and its derivative. It was hypothesized that such heteropeptides will reduce the toxic side effects of the drug by facile hydrophobic binding between the polymer and the drug. We have employed the strategy of solid phase peptide synthesis (SPPS) to synthesize low molecular weight hetero-peptides by using L-aspartic acid and benzyl-L-aspartic acid to induce the hydrophobic binding between the peptide and the drug. In future, the proposed methodology can be employed to tailor other polypeptides substituted with benzyl groups to reduce the nephrotoxicity of AmB.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.539-544
• /
• 2010

We have synthesized new blue electroluminescent polyalkylfluorene-based copolymers [poly(F-co-Py)x:y, where x:y = 99:1 or 95:5 mole ratios] containing the hole-injecting pyrazole derivative [3,3'-(4,6-bis(octyloxy)-1,3-phenylene)bis(1,5-diphenyl-4,5-dihydro-1H-pyrazole] through Ni(0) mediated polymerization, and their electroluminescent properties were investigated. Electroluminescent (EL) devices were fabricated with ITO / PEDOT:PSS (110 nm) / copolymers or PF homopolymer (80 nm) / Ca (50 nm) / Al (200 nm) configuration. Each EL device constructed from the copolymer exhibited significantly enhanced brightness and efficiency compared with a device constructed from the PF homopolymer. The EL device constructed with poly(F-co-Py)99:1 exhibited the highest luminous efficiency and brightness (0.95 cd/A and $2,907\;cd/m^2$, respectively). The achieved luminous efficiency was an excellent result, providing almost a 4-fold improvement on the efficiency obtainable with the a PF homopolymer device. This enhanced efficiency of the copolymer devices results from their improved hole injection and more efficient charge carrier balance, which arises from the HOMO level (~5.83 eV) of the poly(F-co-Py)99:1 copolymer, which is higher than that of the PF homopolyme (~5.90 eV).

• Macromolecular Research
• /
• v.11 no.1
• /
• pp.47-52
• /
• 2003

The objective of this study was to develop a polymeric drug delivery system for camptothecin (CPT), capable of improving its therapeutic index and reducing its side effects. A monomeric conjugate, 3,6-endo-methylene-1,2,3,6-tetrahydrophthalimidoethanoylcamptothecin in (ETECPT) between CPT and 3,6-endo-methylene-1,2,3,6-tetrahydrophthalimidoethanoic acid was synthesized. Its homo-and copolymer with acrylic acid (AA) were prepared by photopolymerization using 2,2-dimethoxy-2-phenylacetophenone (DMP) as a photoinitiator. The monomer and its polymers were characterized by IR, $^1$H- and $^{13}$ C-NMR spectra. The ETECPT content in poly(ETECPT-co-AA) obtained by elemental analysis was 82 wt%. The number-average molecular weights of the polymers determined by gel permeation chromatography were as follows: M$_{n}$ = 11,400 for poly(ETECPT), M$_{n}$ = 17,900 for poly(ETECPT-co-AA). The $IC_{50}$/ values of ETECPT and its polymers against cancer cells were much larger than that of CPT. Our results from the in vivo antitumor activity indicated that all polymers show high antitumor activity than CPT at a dose of 100 mg/kg./kg.