• Elastomers and Composites
• /
• 제55권4호
• /
• pp.277-280
• /
• 2020

In this study, mesoporous hollow silica spheres were synthesized using a polystyrene core and cetyltriammonium chloride (CTACl) as a pore template, and a low-cost water glass instead of expensive tetraethyl orthosilicate (TEOS) as a precursor. In addition, the material was synthesized by varying the concentration of polystyrene. Later, the polystyrene core and CTACl were removed by firing in a high-temperature heat-treatment process. The synthesized product was analyzed by various methods, such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), and N2-sorption analysis. It was confirmed that the hollow silica sphere had a hexagonal structure with a Brunauer-Emmett-Teller (BET) specific area of 1623 ㎡/g.

• Journal of Mechanical Science and Technology
• /
• 제20권11호
• /
• pp.1920-1933
• /
• 2006

Piezoelectric materials produce an electric field by deformation, and deform when subjected to an electric field. The coupling nature of piezoelectric materials has acquired wide applications in electric-mechanical and electric devices, including electric-mechanical actuators, sensors and structures. In this paper, a hollow sphere composed of a radially polarized spherically anisotropic piezoelectric material, e.g., PZT_5 or (Pb) (CoW) $TiO_3$ under internal or external uniform pressure and a constant potential difference between its inner and outer surfaces or combination of these loadings has been studied. Electrodes attached to the inner and outer surfaces of the sphere induce the potential difference. The governing equilibrium equations in radially polarized form are shown to reduce to a coupled system of second-order ordinary differential equations for the radial displacement and electric potential field. These differential equations are solved analytically for seven different sets of boundary conditions. The stress and the electric potential distributions in the sphere are discussed in detail for two piezoceramics, namely PZT _5 and (Pb) (CoW) $TiO_3$. It is shown that the hoop stresses in hollow sphere composed of these materials can be made virtually uniform across the thickness of the sphere by applying an appropriate set of boundary conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.59-60
• /
• 2010

본 연구는 도넛형 중공 형성체를 적용한 중공 슬래브의 뚫림 전단 성능을 실험적으로 파악하였다. 그리고 이를 통하여, 위험단면 내 중공 슬래브 적용가능성을 검토하였으며, 중공형성체 고정철물의 뚫림 전단 보강성능을 파악하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.309-314
• /
• 1999

With a view to seek the influence of hollow sphere pigments of latex upon the printed color on coated paper surface, the hollow sphere pigments were compared with filled ones in a variety of experimental approaches. Colloidal properties of latices were determined by measuring zeta potential and particle size distribution. For the amphoteric filled sphere pigment of latex, the polarity was reversed from the negative side to the positive side with decreasing pH. An extraordinarily high peak in the particle size distribution of the amphoteric filled evidenced aggregation between latex particles near the isoelectric point, depending on the electrolyte concentration and pH of the suspending medium. Coated papers containing the hollow sphere pigment in their coating improved optical properties like gloss and brightness. Optical parameters solely of the coating could account for this finding. An equation derived from the Kubelka-Munk equation calculated them fro twice measurements of reflectance of a coated paper over two substrates of different reflectances. This method permitted to predict brightness of coated paper of which coat weight would be different fro the actual one. The colorimetric parameters of solid-printed surfaces of the coated papers closely related to optical and structural properties of the coated papers. The color of the printed surfaces was dominated by the brightness and the smoothness of the coated papers. The hollow sphere pigments were proved to improve optical properties of coated paper and to control minutely colorimetric parameters of printed surfaces.

• Structural Engineering and Mechanics
• /
• 제23권5호
• /
• pp.525-542
• /
• 2006

On the basis of equilibrium equations for static electric and magnetic fields, two unknown functions related to electric and magnetic fields were firstly introduced to rewrite the governing equations, boundary conditions and initial conditions for mechanical field. Then by introducing a dependent variable and a special function satisfying the inhomogeneous mechanical boundary conditions, the governing equation for a new variable with homogeneous mechanical boundary conditions is obtained. By using the separation of variables technique as well as the electric and magnetic boundary conditions, the dynamic problem of a functionally graded magneto-electro-elastic hollow sphere under spherically symmetric deformation is transformed to two Volterra integral equations of the second kind about two unknown functions of time. Cubic Hermite polynomials are adopted to approximate the two undetermined functions at each time subinterval and the recursive formula for solving the integral equations is derived. Transient responses of displacements, stresses, electric and magnetic potentials are completely determined at the end. Numerical results are presented and discussed.

• 한국화재소방학회논문지
• /
• 제25권6호
• /
• pp.89-97
• /
• 2011

본 연구는 RC조 슬래브의 자중을 줄이기 위하여 구조적 역할을 담당하지 않은 상 하부 철근 사이의 중앙부 콘크리트를 제거하고, 중량감소 및 단열성능을 확보할 수 있는 경량 중공체를 적용한 중공슬래브에 대하여 현장 적용을 위한 최소 요구내화성능(1~2시간)을 평가하기 위한 것이다. 이에 피복두께 및 적재하중, 경간길이를 실험인자로 설정하여 실험을 수행하였다. 내화실험을 실시한 결과, 실험인자에 상관없이 모두 목표 내화성능인 120분을 만족하였고 피복두께 보다 적재하중이 내화성능에 더 큰 영향을 미치는 것으로 나타났다. 경간길이는 짧을수록 내화성능에 유리한 것으로 나타났다. 기존 RC조 슬래브에 적용되지 않던 경량 중공체로 사용된 발포폴리스티렌(EPS: Expanded Polystyrene)의 고온시 특성을 파악한 결과 $100^{\circ}C$에서 유리천이현상(Glass Transition)으로 인한 온도상승 지연구간이 발생하는 것으로 나타났다. 또한 발포폴리스티렌의 polystyrene는 녹는점이 $185^{\circ}C$로 낮은 온도에서 용융된다. 따라서 낮은 온도에서 중공체가 용융되어 온도센서 주변에서 전도에 의한 열전달 매개체가 사라지게 된다. 이에 중공체의 온도는 철근 및 콘크리트에 비해 낮게 나타나는 것으로 판단된다. 따라서 경량 중공체는 낮은 온도에서 용융되어 중공슬래브의 내화성능에 큰 영향을 미치지 않는 것으로 판단된다.

• Steel and Composite Structures
• /
• 제46권2호
• /
• pp.211-220
• /
• 2023

Welded hollow spherical joints are commonly used joints in space grid structures. An internal stiffener is generally adopted to strengthen the joints when large hollow spheres are used. To further strengthen it, external stiffeners can be used at the same time. In this study, axial compression tests are conducted on four full-scale 550 mm spherical joints. The failure modes and strengths of the tested joints are investigated. It shows that the external stiffeners are able to increase the strength of the joint up to 25%. A numerical model for large spherical joints with stiffeners is established and verified against the experimental results. Parametric studies are executed considering six main design factors using the verified model. It is found that the strength of the spherical joint increases as the thickness, height and number of the external stiffeners increase, and the hollow sphere's diameter has a neglectable effect on the enhancement caused by the external stiffeners. Based on the experimental and numerical results, a practical formula for the compressive bearing capacity of large welded hollow spherical joints with both internal and external stiffeners is proposed. The proposed formula gives a conservative prediction on the compressive capacity of large welded hollow spherical joints with both internal and external stiffeners.

• KSTLE International Journal
• /
• 제8권1호
• /
• pp.7-10
• /
• 2007

The rheological property of hollow PANI malonate suspension in silicone oil was investigated by varying the electric fields and shear rates, respectively. The hollow PANI malonate susepnsion showed a typical electrorheological (ER) response caused by the polarizability of an amide polar group and shear yield stress due to the formation of chains upon application of an electric field. The shear stress for the hollow PANI malonate suspension exhibited an electric field power of 0.90. On the basis of the experimental results, the newly synthesized hollow PANI malonate suspension was found to be an anhydrous ER fluid.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권3호
• /
• pp.160-166
• /
• 2014

본 연구에서는 건축물의 외피를 통해 손실되는 냉난방 에너지를 감소시킬 수 있는 방안으로써, 구조용 콘크리트에 단열성능을 향상시킬 수 있는 할로마이크로스피어 (Hollow Micro Sphere, 이하 HMS)를 사용하였다. 중공구조의 마이크로 크기의 입자인 HMS를 사용한 콘크리트를 실험한 결과는 아래와 같다. HMS의 사용으로 인해 슬럼프에 감소가 나타나 고성능감수제의 사용이 필요할 것으로 판단된다. 공기량은 HMS의 치환율이 증가할수록 감소하는 경향을 보였으며, 압축강도는 HMS의 계면부착력이 형성되지 않는 것에 기인하여 치환율 증가에 따라 감소하는 것으로 나타났다. 열전도율과 단위용적질량은 치환율이 증가할수록 감소하였다. 열전도율은 보통콘크리트 약 30.0~46.5% 감소한 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.258-259
• /
• 2014

Modern concrete high safety, constructability and economy due to advantages such as buildings used for more than about 70%, but due to the low thermal performance is essential, such as installation of additional insulation is required, and therefore increase the cost of construction, as well as the construction period and condensation Symptoms such as a domestic environment, such as to inhibit the problem by generating such an improvement has been desired. In this study, we want to present the base line data for the development of improved insulation performance concrete with analyzing and evaluating the Durable Properties of the concrete combination of hollow glass microsphere and lightweight aggregate.