• 한국농촌건축학회논문집
• /
• 제15권2호
• /
• pp.9-16
• /
• 2013

This paper is to discover how the photogrammetry method can be utilized for recording modern architectural properties. As a result of conducting photogrammetry aimed at the main building and water supply tower of Goesan Middle School, it was possible to measure actually either complicated patterns or a damaged area on the facade. However, there appeared errors in the actual measurement of the hollow or protruded area on the facade to measure actually or of an object in the cylinder form. First, for the actual measurement of the protruded area, it is possible to complete a facade by measuring actually the protruded area separately after dividing it and complementing it on the facade, Second, concerning an object in the cylinder form, it is possible to complete one facade by matching a facade which is measured actually with a Diaver method among the MSR photogrammetry methods, and three dimensional standard coordinates which are obtained through Totalstation.

• 한국기계연구소 소보
• /
• 통권14호
• /
• pp.33-43
• /
• 1985

Thick cylindrical structures, such as assemblies with electrical induction heaters or nuclear fuel element, are sometimes subjected to thermal stresses from internal heating. Such stresses are produced by temperature gradients between the inside and outside surfaces. These problems possess symmetry about either a point or an axis. the objective of this paper is to present the determination of the temperature distribution and thermal stress-strain within a conducting body by finite element method.

• 전기의세계
• /
• 제29권9호
• /
• pp.599-603
• /
• 1980

Mathematically, the Electromagnetic phenomena can be represented by the Maxwell's equations, but it is very difficult to solve these equations, especially, having complex structural boundaries. By the way, the development of a computer system made us easy to solve these kind of partial differential equations. The Finite Element Method, one of the numerical methods, is very this. This paper shows the power of F.E.M. by examining, with an example of a hollow cylinder in a uniform magnetic field which is analytically solvable, the errors and the tendency of magnetic flux lines.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.703-723
• /
• 2015

In this paper optimization of volume fraction distribution in a thick hollow cylinder with finite length made of two-dimensional functionally graded material (2D-FGM) and subjected to steady state thermal and mechanical loadings is considered. The finite element method with graded material properties within each element (graded finite elements) is used to model the structure. Volume fractions of constituent materials on a finite number of design points are taken as design variables and the volume fractions at any arbitrary point in the cylinder are obtained via cubic spline interpolation functions. The objective function selected as having the normalized effective stress equal to one at all points that leads to a uniform stress distribution in the structure. Genetic Algorithm jointed with interior penalty-function method for implementing constraints is effectively employed to find the global solution of the optimization problem. Obtained results indicates that by using the uniform distribution of normalized effective stress as objective function, considerably more efficient usage of materials can be achieved compared with the power law volume fraction distribution. Also considering uniform distribution of safety factor as design criteria instead of minimizing peak effective stress affects remarkably the optimum volume fractions.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.656-665
• /
• 1993

Two types of baby corn silk detachment systems called fixing and moving baby corn and based on applying frictional force on the silk were developed and evaluated. In the fixing mode the baby corn was fixed on a pin and a hollow frictional cylinder was moved concentrically and vertically along the baby corn towards the branch end. In the moving mode the baby corn was forced vertically towards the tip to pass through the same silk detachment cylinder. Traveling speeds of the detachment cylinder and the baby corn were 44.5 and 166.9 mm/s. In the fixing mode at silk moisture content of 91 % (w.b) silk detachment efficiencies at low and high speeds were 99.1 and 99.2%. The silk detachment efficiencies in the moving mode at low and high speeds were 96.6 and 98.5%. Damaged baby corn at low speed was less than at high speed in both modes. Minimum damage was nil in the fixing mode at low speed and the maximum was 47.5% in the moving mode at high speed. The damaged was due to ovaries r moval at the base near the joint between the baby corn and the branch.

• Structural Engineering and Mechanics
• /
• 제47권1호
• /
• pp.131-147
• /
• 2013

In this paper, constraint-based fracture mechanics analyses of hollow cylinders with internal circumferential crack under tensile loading are conducted. Finite element analyses of the cracked cylinders are carried out to determine the fracture parameters including elastic T-stresses, and fully-plastic J-integrals. Linear elastic finite element analysis is conducted to obtain the T-stresses, and elastic-plastic analysis is conducted to obtain the fully plastic J-integrals. A wide range of cylinder geometries are studied, with cylinder radius ratios of $r_i/r_o$ = 0.2 to 0.8 and crack depth ratio a/t = 0.2 to 0.8. Fully plastic J-integrals are obtained for Ramberg-Osgood power law hardening material of n = 3, 5 and 10. These fracture parameters are then used to construct conventional and constraint-based failure assessment diagrams (FADs) to determine the maximum load carrying capacity of cracked cylinders. It is demonstrated that these tensile loaded cylinders with circumferential cracks are under low constraint conditions, and the load carrying capacity are higher when the low constraint effects are properly accounted for, using constraint-based FADs, comparing to the predictions from the conventional FADs.

• 대한토목학회논문집
• /
• 제8권1호
• /
• pp.33-40
• /
• 1988

흙과 보강재 사이의 거동을 측정하는 수단으로서 hollow cylinder type의 샘플 내에 보강재를 인장방향으로 삽입하여 주위압력을 일정하게 유지한 가운데 축력(軸力)을 감소시키는 소위 삼축인장시험을 실시하였다. 인장특성(引張特性)(extensibility)이 상이(相異)한 3종류의 보강재를 사용한 결과 파괴변형율(failure strain), 최대강도후의 응력강소(loss of post-peak strength), 변형모양(deformation mode) 등이 보강재에 따라 각각 독특하였고, 파괴의 양상은 breakage 또는 pull-out 이 발생하였으며, 보강재단(補强材端)의 고정여부에 따라 보강효과가 영향을 받음이 확인되었다. 따라서 보강토해석 및 설계시 흙 및 보강재 자체의 강도(强度)와 더불어 보강재의 인장특성(引張特性)과 경계조건(境界條件)이 매우 중요한 고려요소임을 알 수 있었다.

• 한국전자파학회논문지
• /
• 제19권4호
• /
• pp.404-410
• /
• 2008

이 논문에서는 900 MHz 대 RFID 휴대 리더용 안테나의 대역폭을 광역화하기 위해 동축 프로브 주위에 실린더 형태의 비아를 갖는 구조의 원편파 마이크로스트립 안테나를 제안한다. 유전율 4.4의 FR4 기판으로 제작한 두께 6.4 mm, 크기 $84{\times}84\;mm$ 안테나의 반사 손실 10 dB 대역폭은 92 MHz로 비아가 없는 같은 치수의 마이크로 스트립 안테나에 비해 대역폭이 약 3배 이상 확장되는 것을 측정을 통해 확인하였다. 10 dB 대역폭 내에서 이득과 축비는 각각 $0.01{\sim}1.825\;dB$, $2.3{\sim}8.2\;dB$ 범위에 있다.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.137-146
• /
• 1997

A Study on the 본 연구에서는 플라스틱드레인을 이용하여 진공수평배수에 의해 개량된 준설 점토 지반의 압밀거동을 파악하기 위하여 대형 압밀시험을 실시하였으며, 실험 결과가 포텐결중공원주의 압밀이론을 이용한 수치해석에 의해 비교 검토되었다. 본 연구 실험결과에 의하면 수평배수진공압밀시험은 점토층 내부의 함수비 및 간극수압과 드레인 배수 속도 등이 진공압밀 시간 경과에 따라 감소되어 압밀이 급속하게 진행되고 있음이 확인되었다. 점토층 중공원주의 방사류에 대한 선형포텐샬압밀이론을 이용하여 수치 압밀해석 결과 간극수압은 확산 형태보다 흙의 변형과 투수에 의해 크게 좌우되고 있으므로, 지표면 부근에서의 실측 침하량은 압밀응력증가율 a가 -0.5정도에서 수치해석과 일치하며 또한 드레인 설치 부근에서의 점토층 침하량은 Baryon 압밀이론과 유사한 거동을 나타내고 있다. 최종적으로 수평 배수에 대한 적당한 선택과정을 포함한 설계 및 시공관리가 시험결과에 의하여 설명 되었으며 포텐셜압밀이론은 진공배수시 수평드레인에 의한 압밀거동을 정확하게 예측할 수 있다.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.241-250
• /
• 1990

본 연구에서는 낙구식 점도계를 이용하여 낮은 농도의 용액을 실험할 때 종말 속도측정의 어려움을 해결하기 위하여 레이저와 특수 타이머를 설치하였으며 정확한 특성시간을 결정하기 위하여 실린더 내부의 시험유체를 교란시키지 않고, 떨어뜨린 구 를 회수하는 장치를 제작하였다. 또한 주로 rheogoniometer에 의존하던 영 전단률 점성계수를 측정하기 위하여 속이 빈 알루미늄 구(hollow aluminium ball)의 밀도를 시험 유체와 거의 같은 정도까지 변화시켜가며 종말 속도를 측정하였으며 점탄성 유체 로써 Separan AP-273의 낮은 농도인 300에서 2000wppm까지의 저농도 용액에 대한 특성 시간을 여러모델에 의하여 실험적으로 결정하고 저농도 폴리머 용액에서 퇴화로 인한 점탄성유체의 특성 변화를 분석하였다.