• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1552-1557
• /
• 2004

This paper introduced about characteristics on the non-steady heat transfer of STS 304 hollow cylinder, In the non-steady state, the specific heat and conductivity are depended on the temperature variations, and these properties affect to the governing equation on heat conduction. But the most of numerical analysis on heat conduction is assumed to constant properties which is conductivity and specific heat. Assuming that conduction is assumed to constant properties which is conductivity and specific heat. Assuming that the properties are reacted sensitively, the numerical results can have the difference of between constant properties with non-constant properties. The main parameters are specific heat and conductivity. The temperature distributions of the STS 304 hollow cylinder became in steady state after 4 minutes in case of the constant properties. As the conductivity in varied with temperature, the temperature distributions became in steady state after 15 minutes. Therefore, a numerical analysis of the non steady state heat transfer will has to apply that conductivity varied with temperature.

• 터널과지하공간
• /
• 제23권5호
• /
• pp.362-371
• /
• 2013

수압파쇄법으로 최대수평주응력 크기 규명에 필요한 요소 중 하나인 암반의 인장강도를 측정하는 방법에 대해 연구하였다. 석모도 시추공에서 회수한 화강암 시료에 대해 두 가지 실내시험(중공원통 인장시험 및 압열인장시험)으로 인장강도를 측정하고 두 결과가 차이를 보이는지 비교하였다. 중공원통 인장시험에서는 높은 수압증가율 상태에서 더 높은 인장강도를 보여, 현장의 수압파쇄시험에서 보인 수압 증가율 상태에서 측정된 인장강도나 그 증가율로 보정된 인장강도를 이용해야한다는 점을 보였다. 인장강도에 대한 수압 증가율 효과와 크기효과를 보정하면 중공원통 인장시험 결과는 압열인장시험 결과와 유사하게 나타났으며 이는 수압파쇄 인장강도를 위해 압열인장강도를 이용할 수도 있다는 점을 시사한다.

• Smart Structures and Systems
• /
• 제15권6호
• /
• pp.1411-1437
• /
• 2015

The electro-magneto- thermo-elastic behavior of a rotating functionally graded long hollow cylinder with functionally graded piezoelectric (FGPM) layers is analytically analyzed. The layers are imperfectly bonded to its inner and outer surfaces. The hybrid cylinder is placed in a constant magnetic field subjected to a thermo-electro-mechanical loading and could be rested on a Winkler-type elastic foundation. The material properties of the FGM cylinder and radially polarized FGPM layers are assumed to be graded in the radial direction according to the power law. The hybrid cylinder is rotating about its axis at a constant angular velocity. The governing equations are solved analytically and then stresses, displacement and electric potential distribution are calculated. Numerical examples are given to illustrate the effects of material in-homogeneity, magnetic field, elastic foundation, applied voltage, imperfect interface and thermo-mechanical boundary condition on the static behavior of a FG smart cylinder.

• Structural Engineering and Mechanics
• /
• 제71권6호
• /
• pp.713-738
• /
• 2019

In the paper the dynamics of the oscillating moving load acting in the interior of the hollow cylinder surrounded with elastic medium is studied within the scope of the exact field equations of 3D elastodynamics. It is assumed that the oscillating load act on the certain arc of the internal circle of the cylinder's cross section and this load moves with constant velocity along the cylinder's axis. The corresponding 3D dynamic problem is solved by employing moving coordinate system, the exponential Fourier transform and the presentation these transforms with the Fourier series. The expressions of the transforms are determined analytically, however their originals are found numerically. Under the investigations carried out in the paper the main attention is focused on the so-called "gyroscopic effect", according to which, the influence of the vibration frequency on the values of the critical velocity and interface stresses are determined. Numerical results illustrated this effect are presented and discussed. In particular, it is established how the non-axisymmetricity of the problem acts on the influence of the load oscillation on its critical velocity and on the interface stresses.

• Structural Engineering and Mechanics
• /
• 제77권5호
• /
• pp.571-586
• /
• 2021

The present paper studies the influence of the inhomogeneous initial stresses in the bi-layered hollow cylinder and it is assumed that these stresses are caused by the hydrostatic pressures acting on the interior and outer free surfaces of the cylinder. The study is made by utilizing the version of the three-dimensional linearized theory of elastic waves in bodies with initial stresses for which the initial stress-strain state in bodies is determined within the scope of the classical linear theory of elasticity. For the solution to the corresponding eigenvalue problem, the discrete-analytical method is employed. Numerical results are presented and analyzed for concrete selected pairs of materials. According to these results and their analyses, it is established that, unlike homogeneous initial stresses, the influence of the inhomogeneous initial stresses on the torsional wave dispersion has not only quantitative but also qualitative character. For instance, in particular, it is established that as a result of the initial stresses caused by the hydrostatic pressure acting in the interior free surface of the cylinder, the cut-off frequency appears for the fundamental dispersive mode and the values of this frequency increase with the intensity of this pressure.

• 대한공업교육학회지
• /
• 제34권2호
• /
• pp.331-345
• /
• 2009

본 연구에서는 변압기 열화 진단에 사용되는 Sagnac형 간섭계의 핵심 기술인 광섬유 음향 센서의 설계를 위하여 세 가지 서로 다른 형태의 맨드릴형을 제안하였고 이의 진동 특성을 살펴봄으로서 보다 뛰어난 감도를 가진 센서를 구현하고자 하였다. 광섬유 음향 센서용 맨드릴을 외경 요철형, 중공 원통형, 내경 요철형등의 세 가지로 분류하고 이의 고유진동수와 고유 모드를 해석하였다. 2kHz 미만의 고유진동수는 제외하고 주로 2~20kHz 범위 내에 속한 고유진동수를 검출하여 고유모드를 나타내었다. 설계된 맨드릴의 기본 형상 치수는 외경 30 mm, 길이 50mm이다. 원통의 두께는 1 mm이며 요철의 크기는 $2mm{\times}2mm$이다. 유한요소해석 결과 외부 음압 주파수가 2~20 kHz 범위에서 11 kHz 인근의 주파수인 경우 외경 요철형과 중공 원통형의 맨드릴을 선택하면 높은 감도를 얻을 수 있다. 17 kHz 인근 주파수에서는 외경 요철형과 내경 요철형이 유리하며 20 kHz인근에서는 중공 원통형과 내경 요철형이 높은 감도를 얻을 수 있음을 알 수 있었다. 본 연구의 결과는 향후 변압기 내에 삽입되어 각종 열화 진단용 모니터링 센서로 활용되는 광섬유 음향 센서의 맨드릴 설계에 매우 효과적으로 이용할 수 있으며 본 연구에서 제시한 기법을 이용하여 MHz 단위의 초음파 감지에도 충분히 활용될 수 있으리라 기대된다.

• 한국군사과학기술학회지
• /
• 제2권1호
• /
• pp.110-120
• /
• 1999

본 논문은 흡습환경에서 온도변화를 겪는 무한히 긴 속빈 실린더의 시간변화에 따른 흡습열 응력 변화에 관해서 연구한 것이다. 평면변형률 가정에 기초한 흡습열탄성론의 방정식이 열과 습기 사이의 연성효과를 고려하여 수립되었다. 시간경과에 따른 흡습열 응력을 구하기 위한 완전한 형태의 해가 연성분리기법과 변수분리방법을 이용하여 구하였으며, 온도와 습도 집중치의 분포를 포함한 수치적인 적용 예에 대한 결과를 분석하였다. 시간경과에 따른 흡습열 특성이 직교이방성 속빈원통벽에서 변위와 응력의 변화 및 분포에 미치는 영향을 함께 제시하였다.

• Structural Engineering and Mechanics
• /
• 제83권6호
• /
• pp.825-834
• /
• 2022

The effectiveness and accuracy of the strain-based approach applied for analysis of two kinds of heterogeneous hollow cylinders subjected to thermal and mechanical loads are examined in this study. One is a multilayer cylinder in which the material in each layer is assumed to be linearly elastic, homogeneous and isotropic. Another is a hollow cylinder made of functionally graded materials with arbitrary gradient. The steady state condition without heat generation is considered. A sector in-plane finite element in the polar coordinate system based on strain approach is used. This element has only three degrees of freedom at each corner node. Analytical solutions available in the literature are presented to illustrate the accuracy of the sector element used. The obtained results for displacements and stresses are shown to be in good agreement with the analytical solutions.

• Coupled systems mechanics
• /
• 제12권1호
• /
• pp.41-68
• /
• 2023

The present work is concerned with the study of the influence of inhomogeneous initial stresses in a hollow cylinder containing a compressible inviscid fluid on the propagation of axisymmetric longitudinal waves propagating in this cylinder. The study is carried out using the so-called three-dimensional linearized theory of elastic waves in bodies with initial stresses to describe the motion of the cylinder and using the linearized Euler equations to describe the flow of the compressible inviscid fluid. It is assumed that the inhomogeneous initial stresses in the cylinder are caused by the internal pressure of the fluid. To solve the corresponding eigenvalue problem, the discrete-analytic solution method is applied and the corresponding dispersion equation is obtained, which is solved numerically, after which the corresponding dispersion curves are constructed and analyzed. To obtain these dispersion curves, parameters characterizing the magnitude of the internal pressure, the ratio of the sound velocities in the cylinder material and in the fluid, and the ratio of the material densities of the fluid and the cylinder are introduced. Based on these parameters, the influence of the inhomogeneous initial stresses in the cylinder on the dispersion of the above-mentioned waves in the considered hydro-elastic system is investigated. Moreover, based on these results, appropriate conclusions about this influence are drawn. In particular, it is found that the character of the influence depends on the wavelength. Accordingly, the inhomogeneous initial stresses before (after) a certain value of the wavelength lead to a decrease (increase) of the wave propagation velocity in the zeroth and first modes.

• Structural Engineering and Mechanics
• /
• 제34권4호
• /
• pp.449-474
• /
• 2010

A smart hollow cylinder consisting of a host functionally graded elastic core layer and two surface homogeneous piezoelectric layers is presented in this paper. The bonding between the layers can be perfect or imperfect, depending on the parameters taken in the general linear spring-layer interface model. The effect of such weak interfaces on free vibration and steady-state response is then investigated. Piezoelectric layers at inner and outer surfaces are polarized axially or radially and act as a sensor and an actuator respectively. For a simply supported condition, the state equations with non-constant coefficients are obtained directly from the formulations of elasticity/piezoelasticity. An approximate laminated model is then introduced for the sake of solving the state equations conveniently. It is further assumed that the hollow cylinder is embedded in an elastic medium and is simultaneously filled with compressible fluid. The interaction between the structure and its surrounding media is taken into account. Numerical examples are finally given with discussions on the effect of some related parameters.