• Progress in Superconductivity and Cryogenics
• /
• v.11 no.2
• /
• pp.15-19
• /
• 2009

Bulk $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) superconductor was manufactured with the top-seeded melt grown method. The 9, 16, and 25 holes, as small as 0.7mm in diameter, parallel to the c-axis were mechanically drilled. Magnetic flux mapping and levitation force were measured and compared to estimate the influence of multiple holes on the magnetic properties of YBCO superconductor at 77K. According to the measurements, the maximum magnetic flux density obtained from the plain sample was 2.48kG, while the maximum magnetic flux density of the sample with 25 holes was low as around 2.29kG. The levitation force measured on the sample with 9 holes increased from 91N to 105N. The levitation force measured on the samples with 9 holes is relatively higher than the plain sample without any holes. In this case, increase of the levitation force in the perforated samples could be explained by enhancement of the cooling efficiency more effectively. We investigated that the magnetic properties of YBCO superconductor were strongly influenced by the artificial holes.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.3
• /
• pp.27-34
• /
• 1991

Screw withdrawal test was carried out on the face and edge of domestic particleboard and medium density fiberboard in order to evaluate optimum pilot hole diameter. The obtained results were as follows: 1. Maximum withdrawal strengths on the face and edge of particleboard were obtained with pilot hole diameters at about 50% of root diameters of screw. 2. Maximum withdrawal strength on the face and edge of medium density fiberboard were obtained with pilot hole diameters that were about 60% and 50% of root diameters of screw, respectively. 3. Withdrawal strength showed about 91% of maximum withdrawal strength when pilot holes were not pre bored at particleboard. but when pilot holes at 90% of root diameter of screw withdrawal strength showed about as 51.3% of maximum withdrawal strength. 4. Withdrawal strength showed about 88% of maximum strength when pilot holes were not used, but withdrawal strength indicated 55.4% of maximum strength in case of 90% of root diameters of screw. 5. Maximum withdrawal strength on the face of particleboard was about 70.5% higher than that of the edge, and however medium density fiberboard was about 19.6% higher than that of the edge.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.86.3-86.3
• /
• 2015

There could be significant numbers of isolated stellar mass black holes in our Galaxy. The detection of these black holes will provide important clues on the origin of supermassive black holes. Interstellar gas will be accreted to these isolated black holes in nearly spherical flow. The gas and the interstellar magnetic field will be compressed and emit bremsstrahlung and magnetic bremsstrahlung. We calculate the density, temperature, magnetic field of the accretion flow onto a 10 solar mass black hole as well as its radiative emission; special attention is given to cyclotron radiation and synchrotron radiation, which covers from microwave to X-ray. We consider the possibility to detect these radiation from isolated Galactic black holes with current instruments and surveys.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.9-18
• /
• 2007

This study shows an implementation of partial holes in an initial design domain in order to improve convergences of topology optimization algorithms. The method is associated with a bubble method as introduced by Eschenauer et al. to overcome slow convergence of boundary-based shape optimization methods. However, contrary to the bubble method, initial holes are only implemented for initializations of optimization algorithm in this approach, and there is no need to consider a characteristic function which defines hole's deposition during every optimization procedure. In addition, solid and void regions within the initial design domain are not fixed but merged or split during optimization Procedures. Since this phenomenon activates finite changes of design parameters without numerically calculating movements and positions of holes, convergences of topology optimization algorithm can be improved. In the present study, material topology optimization designs of Michell-type beam utilizing the initial design domain with initial holes of varied sizes and shapes is carried out by using SIMP like a density distribution method. Numerical examples demonstrate the efficiency and simplicity of the present method.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.6
• /
• pp.50-56
• /
• 2004

This study was conducted to investigate the performance of sound absorption type-noise barriers manufactured with a combination of wood particles used for particleboard, recycled waste newspaper, and cement. An average density of wood-combined cement board was in the range from 0.83 to 0.96 g/cm³, showing relatively low-density board. Regardless of types of cement bonded board or wooden board, the board with concave holes(凹)-formed surfaces showed greater sound absorption coefficient compared to those of flat surface boards. The board density was not related with those coefficients. Accordingly, it was concluded that concave or deep corrugated surface structure has played an important role in sound absorption for the application of sound absorption type-noise barrier.

• Tribology and Lubricants
• /
• v.31 no.1
• /
• pp.21-27
• /
• 2015

We carry out experiments to characterize textured bearing steel with varying hole density and depth. Textured surface is believed to reduce the friction coefficient, and improve performance and wearing caused by third-body contact. We employ three lubrication regime conditions based on the Stribeck curve: boundary lubrication, mixed lubrication, and hydrodynamic lubrication. Ultrasonic machining is an untraditional machining method wherein abrasive grit particles are used. The hammering process on the work piece surface by abrasive provides the desired form. In this study, we create multi-holes on the bearing steel surface for texturing purposes. Holes are formed by an ultrasonic machine with a diameter of 0.534 mm and a depth of about 2-4 mm, and they are distributed on the contact surface with a density between 1.37-2.23%. The hole density over the surface area is an important factor affecting the friction. We test nine types of textured specimens using four times replication and compare them with the untextured specimen using graphs, as well as photographs taken using a scanning electron microscope. We use Analyzes variant in this experiment to find the correlation between each pair of treatments. Finally, we report the effect of hole density and depth on the friction coefficient.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.14-22
• /
• 2010

The most costly and time-consuming process in the fabrication of today's multi-layer circuit board is drilling interconnection holes between adjacent layers and via holes within a layer. Decreasing size of via holes being demanded and growing number of via holes per panel increase drilling costs. Component density and electronic functionality of today's multi-layer circuit boards can be improved with the introduction of cost-effective, variable depth laser drilled blind micro via holes, and interconnection holes. Laser technology is being quickly adopted into the circuit board industry but can be accelerated with the introduction of a true production laser drilling system. In order to get optimized condition for drilling to FPCB (Flexible Printed Circuit Board), we use various drill pattern as drill step. For productivity, we investigate drill path optimization method. And for the precise drilling the thermal drift of scanner and temperature change of scan system are tested.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.73-82
• /
• 2005

We constructed a series of calibration models in the campus of Kangwon National University. A series of experiment for calibrating sonde response as well as casing effect in field measurement. Here we explained the process of construction of calibrating facility which consists of three model holes of different density and three model holes of different diameter. It was discussed the calibration equations obtained from its sonde response calibration test. A density correction chart for different separation of detector from hole wall was suggested, and verified the possibility of determining true density from measurements in cased hole.

• Journal of the Korean Magnetics Society
• /
• v.19 no.2
• /
• pp.67-73
• /
• 2009

The changes of geomagnetic flux density distribution on the ground surface by underground empty spaces had been investigated through the variations of the soil density and measuring heights. The geomagnetic flux density distributions were monitored for the surfaces of different density, sink-hole and tunnel by fluxgate-type magnetometer. The underground empty space and low soil density decreased the geomagnetic flux densities, which were decreased from the boundary of raw and low-density (empty) grounds, and showed the lowest value at the center of low-density (empty) ground. The decreases of geomagnetic flux density by underground empty spaces could be found at the surface with the tunnel located at 80 m underground. And, the underground defects of empty spaces, low density zone, fracture zone and sink holes could be monitored by the phenomena of this decreasing flux density.

• Korean Journal of Environment and Ecology
• /
• v.23 no.2
• /
• pp.220-232
• /
• 2009

The objective of this study was to understand the relationships between forest vegetation characteristics and the damage of Oak wilt disease. Field surveys were carried out for two groups. One group(Group A) consists of Oak wilt infected 18 sites from 7 provinces, and the other group(Group B) consists of 5 permanent sites where data on the relative density of entrance holes drilled by Platypus koryoensis., the vector of Oak wilt disease, were available. Survey results showed that 17 of 18 sites were dominated by Quercus spp.(Group A) and also showed a significant positive relationship($R^2=0.89$, P<0.05) between the relative density of entrance holes and the relative density of Quercus spp.(Group B) implying that the susceptibility to Oak wilt disease is related with the high dominance of Quecus spp. in a forest stand.