• Geomechanics and Engineering
• /
• 제21권3호
• /
• pp.289-300
• /
• 2020

Estimating the damage induced by an explosion around a blast hole has always been a challenging issue in geotechnical engineering. It is difficult to determine an exact dimension for damage zone since many parameters are involved in the formation of failures, and there are some uncertainties lying in these parameters. Thus, the present study adopted a probabilistic approach towards this problem. First, a reliability model of the problem was established and the failure probability of induced damage was calculated. Then, the corresponding exceedance risk curve was developed indicating the relation between the failure probability and the cracked zone radius. The obtained risk curve indicated that the failure probability drops dramatically by increasing the cracked zone radius so that the probability of exceedance for any crack length greater than 4.5 m is less than 5%. Moreover, the effect of each parameter involved in the probability of failure, including blast hole radius, explosive density, detonation velocity, and tensile strength of the rock, was evaluated by using a sensitivity analysis. Finally, the impact of the decoupling ratio on the reduction of failures was investigated and the location of its maximum influence was demonstrated around the blast point.

• 대한전자공학회논문지SD
• /
• 제45권5호
• /
• pp.19-25
• /
• 2008

본 연구에서는 유기반도체인 펜타센과 소스-드레인 금속전극사이에 $C_{60}$을 홀주입층으로 적용한 유기박막트랜지스터를 제작하여 $C_{60}$을 삽입하지 않은 소자와의 전기적특성을 비교하였다. $C_{60}/Au$ 이중전극을 사용한 소자의 경우 Au단일전극을 사용한 소자와 비교하였을 때 전하이동도는 0.298 $cm^2/V{\cdot}s$에서 0.452 $cm^2/V{\cdot}s$ 문턱전압의 경우 -13.3V에서 -10.8V로 향상되었으며, contact resistance를 추출하여 비교하였을 경우 감소함을 확인할 수 있었다. 이러한 성능의 향상은 $C_{60}$을 Au와 pentacene 사이에 삽입하였을 경우 Au-pentacene 간의 원하지 않는 화학적 반응을 막아줌으로써 홀 주입장벽를 감소시켜 홀 주입이 향상되었기 때문이다. 또한 Al을 전극으로 적용한 OTFT도 제작하였다. 기존에 Al은 OTFT에 단일전극으로 사용하였을 경우 둘간의 높은 홀 주입장벽으로 인해 채널이 거의 형성되지 않았으나, $C_{60}/Al$ 이중전극을 사용한 소자의 경우 전하이동도와 전류점멸비은 0.165 $cm^2/V{\cdot}s$, $1.4{\times}10^4$ 으로써 Al를 단일전극으로 사용하는 소자의 전기적 특성에 비해 크게 향상되어진 소자를 제작할 수 있었다. 이는 $C_{60}$과 Al이 접합시에 interface dipole의 형성으로 Al의 vacuum energy level이 변화로 인한 Al의 work function이 증가되어 pentacene과 Al간의 hole injection barrier가 감소되었기 때문이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.429-429
• /
• 2009

Nanoporous anodic alumina membranes (NAAM) with high-density through-hole pores fabricated by hard anodization of aluminum in 0.3 M oxalic acid under the applied voltage of 40 (mild anodization), 80, 100, 120 and 140 V were investigated. The current-time responses monitored using a PC-controlled anodization cell and the corresponding pore structures attainable from field-enhanced scanning electron microscopy (FE-SEM) were analyzed in order to establish the optimum fabrication process. The nanoporous structure can be produced for all the voltage conditions, while the stabilized through-hole pore formation seems to occur at 40, 80 and 140 V. The growth rate under 140 V hard anodization was over 30 times higher than under 40 V mild anodization (1.5 um/hr).

• 천문학회보
• /
• 제38권2호
• /
• pp.60.1-60.1
• /
• 2013

We study tidal disruption and subsequent mass fallback process for stars approaching supermassive black holes on bound orbits, by performing three dimensional Smoothed Particle Hydrodynamics simulations with a pseudo-Newtonian potential. We find that the mass fallback rate decays with the expected -5/3 power of time for parabolic orbits, albeit with a slight deviation due to the self-gravity of the stellar debris. For eccentric orbits, however, there is a critical value of the orbital eccentricity, significantly below which all of the stellar debris is bound to the supermassive black hole. All the mass therefore falls back to the supermassive black hole in a much shorter time than in the standard, parabolic case. The resultant mass fallback rate considerably exceeds the Eddington accretion rate and substantially differs from the -5/3 power of time. We also show that general relativistic precession is crucial for accretion disk formation via circularization of stellar debris from stars on moderately eccentric orbits.

• 대한기계학회논문집B
• /
• 제22권8호
• /
• pp.1132-1140
• /
• 1998

The disintegration process of initial spray from high-pressure swirl injector was investigated at different injection pressures. The transient breakup phenomena that were difficult to observe at high injection pressure were easily observed at the low injection pressure of 0.4MPa. The effect of fuel remained inside a nozzle hole volume on the penetration of initial spray was also investigated. The disintegration process of initial spray could be classified four regions: the formation of mushroom shape, the first collision, the second collision, and the development of spray, The liquid film of cup shape was particularly found in the second collision region, and the growth ratio of its length and width at low and high injection pressures were compared.

• 천문학회보
• /
• 제41권2호
• /
• pp.29.5-30
• /
• 2016

(1) The correlation between the mass of supermassive black holes (SMBHs) and the properties of their host galaxies suggests that SMBHs and host galaxies are closely linked in their formation and evolution. While the exact origin of their relationship is still under debate, theoretical models often invoke feedback from active galactic nuclei as a crucial mechanism for establishing the BH-host correlation. In the first part of my talk, I will present our efforts to find observational sign of the AGN feedback in young luminous AGNs. (2) While intermediate-mass black hole (IMBH) is thought be cosmologically important class to understand the link between stellar mass black holes and SMBHs, it is extremely rare in the present-day Universe. In the second part of this talk, I will report a Gemini/GMOS-N IFU study of an ultraluminous X-ray source in NGC 5252, which is a possible candidate of an off-nuclear non-stellar black hole.

• 천문학회보
• /
• 제42권1호
• /
• pp.43.1-43.1
• /
• 2017

We investigate properties of black hole (BH) binaries formed in globular clusters, by using direct N-body simulations. Comparing with previous studies which usually considered single BH masses, our models consist of two-component BH masses, or continuous BH mass function with single mass ordinary cluster stars. During the early stage of dynamical evolution, initially distributed BHs are move to the cluster center by dynamical friction, then BH-BH binaries start to be formed, and eventually be ejected from the cluster due to three body interaction. Finally we find the formation efficiency of high mass BHs are alwats larger than that of lower mass BHs, implying that a BH mass spectrum expected from GW observation should be biased to high mass. In addition, mass ratios of BHs in binaries prefer similar masses (ratio~1), while the most extreme case is less than 3. Expected merger rate from our models is about 7 BH-BH mergers per $Mpc^3$ per yr.

• 천문학회보
• /
• 제42권1호
• /
• pp.27.4-27.4
• /
• 2017

(1) The correlation between the mass of supermassive black holes (SMBHs) and the properties of their host galaxies suggests that SMBHs and host galaxies are closely linked in their formation and evolution. While the exact origin of their relationship is still under debate, theoretical models often invoke feedback from active galactic nuclei as a crucial mechanism for establishing the BH-host correlation. In the first part of my talk, I will present possible observational biases in the BH-host relation, and methods to overcome these biases. I will also report our efforts to find observational sign of the AGN feedback in high-z young luminous AGNs. (2) While intermediate-mass black hole (IMBH) is thought be cosmologically important class to understand the link between stellar mass black holes and SMBHs, it is extremely rare in the present-day Universe. In the second part of this talk, I will report a Gemini/GMOS-N IFU study of an ultraluminous X-ray source in NGC 5252, which is a possible candidate of an off-nuclear non-stellar black hole.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.726-739
• /
• 2003

A multi-dimensioanl model is being increasingly used to predict the thermo-flow field in the gas turbine combustor. This article addresses an integrated survey of modeling of the liquid spray formation and fuel distribution in gas turbine with high-shear nozzle/swirler assembly. The processes of concern include breakup of a liquid jet injected through a hole type orifice into air stream, spray-wall interaction and spray-film interaction, breakup of liquid sheet into ligaments and droplet,5, and secondary droplet breakup. Atomization of liquid through hole nozzle is described using a liquid blobs model and hybrid model of Kelvin-Helmholtz wave and Rayleigh-Taylor wave. The high-speed viscous liquid sheet atomization on the pre-filmer is modeled by a linear stability analysis. Spray-wall interaction model and liquid film model over the wall surface are also considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1707-1709
• /
• 2002

Ionic wind may be produced by DC corona discharges. In this work, the electrical effect has studied to evaluate applicability in fields of electrostatic cooling, ozone generation, electrostatic precipitation, heat transfer, air flow modification, and etc. The ionic wind velocity was measured as a function of the distance of pin to plate and the diameter of punched hole. The pin to punched-plate electrode generates airflow from pin to plate and the flow direction is controlled by the hole size of punched-plate, input voltage and distance between two electrodes. As a consequence, the ionic wind velocity is nearly proportional to the applied voltages and ranges from 1 to 3 m/sec.