• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.339-343
• /
• 2005

Laser material processing is a very fast growing technology for various industrial applications, because of many advantages. Its major advantage of less and controlled heat input has been exploited successfully for the very critical application of aluminium alloy welding. This study suggested the occurrence source of weld-defects and its solution methods in a welding of lithium ion battery by pulsed Nd:YAG laser. In experiment, battery case has changed over joint geometry from welding of side position to flat one. In case of a electrolyte injection hole in order to seal it, welding is carried out after pressing Al ball. At this time, an eccentric degree, contact length and gap are worked as a major parameters. As improving the method of Al ball pressing, it was able to reduce an eccentricity, increase the contact length and decrease gap. As a results of a experiment, a sound weld bead shape and crack-free weld bead can be obtained.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.51-56
• /
• 2021

Piercing is the process of shearing a circular hole in sheet metal, whose high shear force makes it difficult to secure the durability of tools. In addition, uneven clearance between tools due to poor alignment of the piercing punch causes accelerated die wear and breakage of the tool. This study reviewed the feasibility of in-situ determining alignment failure during the piercing process by analyzing the signal deviation of a bolt-type piezo sensor installed inside the tool whose alignment level was controlled. Finite element analysis was performed to select the optimal sensor location on the piercing tool for sensitive detection of process signals. A well-aligned piercing process results in uniform deformation in the circumferential direction, and shearing is completed at a stroke similar to the sheet thickness. Afterward, a sharp decrease in shear load is observed. The misaligned piecing punch leads to a gradual decrease in the load after the maximum shear load. This gradual decrease is due to the progressive shear deformation that proceeds in the circumferential direction after the initial crack occurs at the narrow clearance site. Therefore, analyzing the stroke at which the maximum shear load occurs and the load reduction rate after that could detect the misalignment of the piercing punch in real-time.

• 한국조경학회지
• /
• 제33권6호
• /
• pp.51-77
• /
• 2006

Pond management is a critical part of overall golf course management, both during growth and maintenance modes of turf care. This study investigated 48 ponds in nine 18- or 27-hole golf courses to analyze the environmental characteristics of ponds. The research process had three phases: (1) inventory and analysis of grading plans and drainage plans, (2) field verification and interviews with greenskeepers, and (3) analyses of water quality and statistics. All data were collected from May to August in 2004. The results of this study can be summarized as follows: 1. It is desirable to site a golf course in a small watershed with high watershed eccentricity to control storm water runoff efficiently and to minimize soil erosion during construction. 2. The siting and size of a pond should be determined through a land-use analysis of the watershed for the purpose of ecological management. The bigger the forest-to-golf course ratio, the better the water quality will be. 3. The size and capacity of each individual ponds varied and there were many somewhat longish rather than round ponds. 4. There were many differences among golf courses in naturalness of the ponds, and the correlation between naturalness and area of aquatic plants was very high. 5. Analyses of pond water quality indicated that the degrees of Dissolved Oxygen, Chemical Oxygen Demanded and Suspended Solids were relatively low values but Total Phosphorus and Total Nitrogen were too high. Therefore a systematic approach is needed to solve e problem. Pesticide residues were not detected in all ponds. 6. Water depth and area of hydrophyte should be considered when designing an ecological pond. 7. All ponds used storm water as a main source of water supply and added underground water. Aquatic plants and physical methods such as water aeration and spray fountains were the main choices for maintaining a healthy aquatic environment.

• 한국전산구조공학회논문집
• /
• 제28권6호
• /
• pp.715-722
• /
• 2015

프리스트레스(PS) 긴장재의 긴장력 관리는 거더 성능관리에 있어 매우 중요한 항목이나 현재는 시공시 설계 긴장력의 도입 여부만을 검증한 후 공용시에는 그 관리가 이루어지지 않는 실정이다. 이에 본 연구에서는 PSC 거더의 제작단계에서부터 공용시까지 생애주기 동안의 긴장력 관리가 가능한 PSC 거더를 제안하기 위한 기초 연구로서, 현재의 기술수준으로 사용 가능한 센서들을 이용하여 PS 긴장력을 측정하는 실험 연구를 수행하였다. 소규모 거더를 제작하여 4종류의 센서를 설치하였고, 긴장력을 도입하면서 각 센서들의 적용성과 정확성을 평가하였다. 실험결과에 따르면, 중공로드셀은 편심하중이 작용하는 경우 기준값보다 하중을 높게 평가하는 경향이 있었다. EM 센서는 실용이 가능한 정확도를 보여주었으며, 콘크리트 내부의 긴장재를 따라 어느 위치에서도 설치할 수 있다.

• 전자공학회논문지
• /
• 제51권12호
• /
• pp.163-173
• /
• 2014

CT 표준팬텀을 이용한 대조도 분해능 평가와 공간 분해능 영상 평가 시 평가자의 주관적 판단에 의한 오류를 최소화하기 위한 자동화된 정량적 평가 방법을 제시하고, 그 유용성을 평가하고자 한다. Nuclear Associates사(社) AAPM CT Performance Phantom(Model 76-410)을 사용하여 120kVp와 250mAs, 10mm collimation과 25cm 이상의 SFOV(scan field of view), 25cm의 DFOV(display field of view)의 촬영조건으로, standard reconstruction algorithm을 이용하여 촬영한 24개의 적합 팬텀 영상과 20개의 부적합 팬텀 영상을 대상으로 평가하였다. 대조도 분해능과 공간 분해능 영상을 정량적으로 평가하기 위해 Mathwork사(社) Matlab(Ver. 7.6. (R2008a)) software를 이용하여 자체 개발한 평가 프로그램을 사용하였다. 본 연구에서는 자체 개발한 자동화된 평가 프로그램을 이용하여 평가한 결과, 정성적 평가 항목을 객관적 수치로 평가할 수 있었다. 첫째, 대조도 분해능의 경우 이심률 지수(eccentricity index, EI)가 0.50, 0.51, 0.52, 0.53 일 때 정성적으로 평가한 결과와 정량적으로 평가한 결과가 일치했다. 둘째, 대조도 분해능에서 대조도 대 잡음비(contrast to noise ratio, CNR)이 -0.0018~-0.0010인 경우에 정성적으로 평가한 결과와 정량적으로 평가한 결과가 일치했다. 셋째, 공간 분해능의 경우 영상 분할 기법을 통해 구멍의 외곽선 윤곽을 자동으로 분할 추출한 결과, 정성적으로 평가한 결과와 정량적으로 평가한 결과가 일치했다.