• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.160-165
• /
• 2006

We have designed a high-transmission nano aperture in a perfect electric conductor film with the incident beam of 532 nm wavelength. The aperture basically has a C-shape and is known to produce a bright spot nearby the aperture in small size less than diffraction limit. The bright spot is strongly coupled with the local plasmon excited through the aperture hole. The characteristics of transmission and peak power of the aperture output were calculated using finite differential time domain (FDTD) technique, and the geometry of the aperture was determined to get a maximum transmission and peak power. To find the effect of the surface plasmon induced near by the aperture, we calculated the variations of the transmittance and the beam sizes by changing the size of the input beam irradiated on the aperture.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.203-208
• /
• 1998

Materials of the Frame hole in fishing trackle reel is made up a number large and small holes. Thus, it is difficult to effective machining. Abrasive flow machining(AFM) is useful to polish a internal or external surface of the 3-dimensional shape parts, which are used in many fields such as aerospace, automative, semi-conductor, and medical component industries. The machining process is that two hydraulic cylinders, which are located face to face, enforce abrasive media to the passage between workpiece and tooling parts alternately, and then the abrasives include in the media pass the passage and polish the surface of workpiece. The media which is made of polymer and abrasives plays the role of the tool for deburring or polishing complex shap workpiece by its viscoelastic characteristics. In this study, the abrasive media for abrasive flow machining was made by mixing viscielastic polymer with alunina and silicon carbide abrasive. Also, we present AFM device design and preliminary results of an investigation in to some aspects of the AFM process performance in fishing trackle reel.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.289-296
• /
• 1999

The integration of the LSI has been greatly improved and the circuit patters on the LSI are becoming finer line and pitch. The high-density electronic packaging technology is improved. In order to realize the high-density packaging technology, the density of the circuit wiring of the printed circuit boards have also been more dense. The build-up process multilayer printed circuit board technology have a lot of vias, possibilities of the finer conductor wirings and have a freedom of capabilities of wiring design. The build-up process printed circuit boards have the wiring rules which are the pattern width: $100-20\mu\textrm{m}$, the via hole diameter: $100-50\mu\textrm{m}$. There three kinds of build-up processes as far materials and hole drilling. In this paper, the recent technology trends of the build-up printed circuit board technologies are described.

• 폴리머
• /
• 제29권5호
• /
• pp.486-492
• /
• 2005

적색을 낼 수 있는 물질을 만들기 위해 비공액 주사슬로 되어 있는 고분자의 곁사슬에 스티렌 분자가 연결되어 있는 트리페닐아민, 반응성 있는 작용기를 가진 아미노벤즈알데히드 그룹, 및 PM(4-(dicyanomethylene)-2-(tertbutyl)4H-pyran) 그룹을 도입하였다. 이 고분자의 전자 흡수 스펙트럼은 용액과 필름 상태에서 비슷하였다. 모든 고분자는 전기화학적으로 활성을 보였으며, 전기 발광 소자를 작동하였을 때 700nm 근처에서 적색을 보였다. $ITO/PPV/P5-PM/BCP/Alq_3/Al$으로 구성된 소자는 $50mA/cm^2$의 낮은 전류 밀도에서 $120cd/m^2$의 밝기를 보였으며, 외부 양자 효율은 $0.67\%$를 나타내었다. 발광 고분자 층에서의 균형있는 전하의 재결합을 유도하여 소자의 발광 효율을 높일 수 있었다. 이중 기능성(bifunctionalized)을 도입함으로써 적색 발광을 내면서 효율이 높은 발광 고분자를 개발하였다.

• 한국통신학회논문지
• /
• 제38B권9호
• /
• pp.744-750
• /
• 2013

본 논문에서는 메타물질 특성을 구현하기 위하여 고임피던스 표면을 갖는 인공자기도체(AMC) 구조를 제안하였다. 설계한 AMC 구조는 3.2GHz에 적용하는 것을 목표로 하였으며, 특성 분석을 위해 다중의 AMC 구조를 일정하게 배열한 반사판으로 제작 및 측정하였다. AMC 반사판의 표면에 형성되는 높은 임피던스로 인하여 반사 특성이 좋아지고, 간섭 및 시스템의 크기를 줄이며, 안테나의 성능을 증가시킨다. 제안된 구조는 설계된 AMC와 접지면을 잇는 via hole을 사용하지 않고, 유전체의 두께와 유전율, 구조의 특성을 이용하여 고임피던스를 구현하였다. 기존의 연구된 via hole이 없는 구조와 비교하여 대역폭이 약 150% 증가하였다. 또한, 금속(PEC) 반사판과 동일한 반사특성을 보이는 대신, 안테나와 반사판 간의 거리를 ${\lambda}/10$까지 줄일 수 있다. 실험을 통하여 안테나와의 거리가 약 10mm 지점에서 방사 특성이 3dB 증가한 것을 확인하였다. 설계된 반사판은 반사거리가 작아 휴대용 무선통신기기의 내부에 삽입이 가능하며, 안테나의 효율을 증가시키고, 후방 방사를 차폐함으로써 전자파인체흡수율을 94% 이상 획기적으로 감소시킬 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.88.2-88.2
• /
• 2010

Dye-sensitized solar cells (DSSCs) have attracted considerable attention on account of their high solar energy-to-conversion efficiencies and low cost processes compared to conventional p-n junction solar cells. The mechanism of DSSC is based on the injection of electrons from the photo excited dyes into the conduction band of the semiconductor electrode. The oxidized dye is reduced by the hole injection into either the hole conductor or the electrolyte. Thus, the light harvesting effect of dye plays an important role in capturing the photons and generating the electron/hole pair, as well as transferring them to the interface of the semiconductor and the electrolyte, respectively. We used the organic fluorescence materials which can absorb short wavelength light and emit longer wavelength region where dye sensitize effectively. In this work, the DSSCs were fabricated with fluorescence materials added $TiO_2$ photo-electrode which were sensitized with metal-free organic dyes. The photovoltaic performances of fluorescence aided DSSCs were compared, and the recombination dark current curves and the incident photon-to-current (IPCE) efficiencies were measured in order to characterize the effects of the additional light harvesting effect in DSSC. Electro-optical measurements were also used to optimize the fluorescence material contents on TiO2 photo-electrode surface for higher conversion efficiency (${\eta}$), fill factor (FF), open-circuit voltage (VOC) and short-circuit current (ISC). The enhanced light harvesting effect by the judicious choice/design of the fluorescence materials and sensitizing dyes permits the enhancement of photovoltaic performance of DSSC.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.36-41
• /
• 2017

In this paper, $Si_3N_4/hBN$ ceramics with various hexagonal boron nitride (hBN) contents (0, 10, 20, or 30 wt%) were fabricated via spark plasma sintering (SPS) at $1500^{\circ}C$, 50MPa, and 10m holding time. The material properties such as the relative density, hardness, and fracture toughness were systematically evaluated according to the hBN content in the $Si_3N_4/hBN$ ceramics. The results show that relative density, hardness, and fracture toughness continuously decreased as the hBN content increased. In addition, peak-step drilling (with tool diameter $500{\mu}m$) was performed to observe the effects of hBN content in micro-hole shape and cutting force. A machined hole diameter of $510{\mu}m$ (entrance) and stable cutting force were obtained at 30 wt% hBN content. Consequently, $Si_3N_4/30wt%$ hBN ceramic is a feasible material upon which to apply semi-conductor components, and this study is very meaningful for determining correlations between material properties and machining performance.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.150-154
• /
• 2000

Mobilities of electrons ($\mu_p$) and holes ($\mu_p$) in 2, 5, and 10 mol% $TiO_2$-doped yttria stabilized zirconia (TD-YSZ) have been estimated by a non-steady state gas permeation method using models proposed by Weppner and Maruyama. Values of $\mu_n$ and $\mu_p$ were found to be closed to those in non-doped YSZ reported earlier. The concentration of electrons and holes were calculated from $\mu_n$ and $\mu_p$ values and the partial conductivities of electrons and holes measured by a dc-polarization method. The concentration of electrons at unit oxygen partial pressure increased with increasing $TiO_2$concentration, while the hole concentration was almost independent of $TiO_2$concentration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.693-695
• /
• 2001

A computational method for the 3 dimensional electro-magnetic induction problems has been developed. The proposed method is capable of modeling the eddy current and analyzing its characteristics using only scalar potential. A benchmark model of asymmetrical conductor with a hole is analyzed to verify the application of the developed method. The calculated value of magnetic flux density are compared with the measured value, and the results indicate that the developed method is valid.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.176-177
• /
• 2013

Surface plasmon polaritons (SPPs) have attracted the attention of scientists and engineers involved in a wide area of research, microscopy, diagnostics and sensing. SPPs are waves that propagate along the surface of a conductor, usually metals. These are essentially light waves that are trapped on the surface because of their interaction with the free electrons of conductor. In this interaction, the free electrons respond collectively by oscillating in resonance with the light wave. The resonant interaction between the surface charge oscillation and the electromagnetic field of the light constitutes the SPPs and gives rise to its unique properties. In this papers, we studied theoretical and experimental extraordinary transmittance (T) and reflectance (R) of 2 dimensional metal hole array (2D-MHA) on GaAs in consideration of the diffraction orders. The 2d-MHAs was fabricated using ultra-violet photolithography, electron-beam evaporation and standard lift-off process with pitches ranging from 1.8 to $3.2{\mu}m$ and diameter of half of pitch, and was deposited 5-nm thick layer of titanium (Ti) as an adhesion layer and 50-nm thick layer of gold (Au) on the semiinsulating GaAs substrate. We employed both the commercial software (CST Microwave Studio: Computer Simulation Technology GmbH, Darmstadt, Germany) based on a finite integration technique (FIT) and a rigorous coupled wave analysis (RCWA) to calculate transmittance and reflectance. The transmittance was measured at a normal incident, and the reflectance was measured at variable incident angle of range between $30^{\circ}{\sim}80^{\circ}$ with a Nicolet Fourier transmission infrared (FTIR) spectrometer with a KBr beam splitter and a MCT detector. For MHAs of pitch (P), the peaks ${\lambda}$ max in the normal incidence transmittance spectra can be indentified approximately from SP dispersion relation, that is frequency-dependent SP wave vector (ksp). Shown in Fig. 1 is the transmission of P=2.2 um sample at normal incidence. We attribute the observation to be a result of FTIR system may be able to collect the transmitted light with higher diffraction order than 0th order. This is confirmed by calculations: for the MHAs, diffraction efficiency in (0, 0) diffracted orders is lower than in the (${\pm}x$, ${\pm}y$) diffracted orders. To further investigate the result, we calculated the angular dependent transmission of P=2.2 um sample (Fig. 2). The incident angle varies from 30o to 70o with a 10o increment. We also found the splitting character on reflectance measurement. The splitting effect is considered a results of SPPs assisted diffraction process by oblique incidence.