• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.497-503
• /
• 2015

This paper analyses the harmonic pollution to power grids caused by several high-power rectifiers, summarizes the requirements for rectifiers in suppressing grid-side current harmonics and optimizes a new-type of current source PWM rectifier with a hybrid switch. The rectifier with a hybrid switch boasts significant current characteristics and cost advantages in the high-power area. To further enhance the working frequency of the current source rectifier with a hybrid switch for suppressing grid-side harmonics and reducing the inductance size, this paper proposes an optimal control strategy based on space vector. It also verifies that the optimal control strategy based on space vector can reduce the total harmonic distortion of the grid-side current of the rectifier with a hybrid switch via circuit simulation and experimental results.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1480-1489
• /
• 2017

In this study, a carrier-based pulse-width modulation (PWM) method for two-level voltage source inverters in the over-modulation region is proposed. Based on the superposition principle, the reference voltage vectors outside the linear modulation boundary are adjusted to relocate to the vector hexagon, while their fundamental magnitudes are retained. In accordance with the adjusted reference vector, the corresponding modulated waves are respectively deduced in over-modulation mode I and II to generate the gate signals of the power switches, guaranteeing the linearity of the fundamental output phase voltage in the over-modulation region. Moreover, due to the linear relationship between the voltage vector and the duty ratios, the complicated sector identification and holding angle calculation found in previous methods are avoided in the modulated wave synthesis, which provides great simplicity for the proposed carrier-based over-modulation strategy. Experimental results demonstrate the effectiveness and validity of the proposed method.

• 한국군사과학기술학회지
• /
• 제25권5호
• /
• pp.539-544
• /
• 2022

This research shows the test performance of a 6 kW-scale hybrid electric power system for the high endurance drone. The power system is composed of a two-stroke reciprocal engine, starter-generator and battery, and they are integrated as one power unit. The engine is designed to provide the house for holding the starter-generator at the end of a crankshaft in turn the engine and starter-generator can maintain the same speed during the operational period. In this way, the generated power is readily controlled by just manipulating an engine throttle movement. Moreover, the starter-generator can initiate an engine operation with an aid of battery power until the combustion process becomes stabilized. In consequence, integration mechanism between an engine and generator is simplified, which results in weight reduction achieved. The duty of back-up battery is to provide a starting power to generator via a system controller in addition to covering momentarily power shortage. Therefore, the electric power system is vindicated to provide 6 kW power through a ground test.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.297-302
• /
• 2014

In this paper, a LED driver compatible with TRIAC-dimmer applying active bleeder is proposed. If TRIAC-dimmer is connected with LED driver, flicker phenomenon occurs by TRIAC malfunction. In order to prevent this problem, a current over holding current must flow into TRIAC. Therefore, additional circuit compatible with TRIAC-dimmer is required to provide enough current. Passive bleeder has power loss in whole operation period. The proposed circuit apply a valley-fill circuit for power-factor-correction and a novel active bleeder detecting malfunction point of TRIAC. Therefore, it prevent malfunction of TRIAC-dimmer and have advantage of higher efficiency than passive bleeder. To verify the validity of proposed circuit, 13W-lighting LED driver prototype has been proposed.

• Journal of Power Electronics
• /
• 제2권2호
• /
• pp.77-87
• /
• 2002

The purpose of this paper is to improve power conversion efficiency of three-phase soft-switching voltage-source inverter with an auxiliary resonant dc link (ARDCL) snubber circuit. Firstly, the operation principle of ARDCL snubber circuit is described. Secondly, this paper proposes an effictive generation method of zero voltage vector for three-phase voltage-source soft-switching inverter in power losses in which power losses in the ARDCL snubber circuit can be reduced. In particular, zero voltage holding interval in the inverter DC busline can be controlled due to the new generation scheme of zero voltage vector. Thirdly, a simulator for power loss analysis for power loss characteristics based on actual system, is developed. the validity of developed. The validity of developed simulator of proved with experimental results. Finally, power efficency of three-phase inverter is estimated according to high carrier frequency by using the simulatior.

• 해양환경안전학회지
• /
• 제24권6호
• /
• pp.646-653
• /
• 2018

선박의 대형화와 기상 이변 등으로 인한 정박 중 주묘 사고는 꾸준히 발생하고 있으나 선박에서는 실제 파주력과 외력의 계산이 복잡하고 번거로워 경험에 의존하고 있다. 이에 본 연구에서는 본선의 선원과 해상교통관제사가 주묘의 위험성을 사전에 판단하여 적절한 조치를 취하거나 정보를 제공할 수 있도록 주묘 위험성 계산 프로그램을 개발하고 이를 검증하였다. 본 프로그램에서는 선박의 풍압력, 마찰력, 표류력, 파주력 등 계산 과정에 필요한 입력 요소들을 사용자가 최대한 손쉽게 입력할 수 있도록 선박의 기본 제원, 정박상태, 외력 환경 등으로 구성하였다. 기존에 발생한 주묘 사례 3건을 주묘 위험성 계산 프로그램에 적용하여 계산한 결과 A선박은 풍속 32 knots(16 m/s), B선박은 풍속 40 knots(21 m/s), 그리고 C선박은 35 knots(18 m/s)에서 'warning'으로 평가되었다. 이는 주묘 선박의 주묘 당시의 풍속과 매우 근접한 값에 해당되어 프로그램의 높은 신뢰성을 보여주었다. 향후 추가적인 주묘 사례를 통한 프로그램의 신뢰성 향상과 기상요소의 자동 입력을 통한 실시간 계산 및 전자해도표시장치와의 연동을 통한 기능 확장이 요구된다.

• Food Science and Biotechnology
• /
• 제15권3호
• /
• pp.374-379
• /
• 2006

This study was carried out to investigate the physicochemical properties of frozen pork muscle which has been thawed using the ohmic thawing process, and to establish the optimal ohmic power intensity. The samples were frozen at $-40^{\circ}C$ and thawed at 0, 10, 20, 30, and 40 V by ohmic thawing. Increasing ohmic power intensity correlated with increased thawing rates. The relationship between ohmic power intensity and thawing rate can be represented as a polynomial function. The pH value decreased with increasing ohmic power intensity (p<0.05). With regard to color measurement, the $L^*$, a, and b values of thawing at all ohmic power intensities were not significantly different. The water holding capacity showed a peak value of 41.62% with an ohmic thawing intensity of 30 V. Cooking losses were lowest at the lowest ohmic thawing intensity of 10 V. Thiobarbituric acid reactive substance (TBARS) levels with all thawing processes were slightly higher than that of the control (p<0.05). Increasing ohmic power intensity did not tend to change the total volatile basic nitrogen (TVBN) value.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.171-174
• /
• 2001

This paper proposes a nonlinear impedance circuit composed by diodes and inductors or capacitors. This circuit needs no control circuits and switches, and the impedance .value is changed by the polarity of current or voltage. and this paper presents one of these applications to improve the input current of capacitor input diode rectifiers. The rectifier using the nonlinear impedance circuit id constructed with four diodes and four capacitors in addition to the conventional rectifiers, that is, it has eight diodes and five capacitors, including a DC link capacitor. It makes harmonic components of the input current reduce and the power factor improve. A circuit design method is shown by experimentation and confirmed simulation. It explained that compared conventional pulse width modulated (PWM) inverter with half pulse-width modulated (HPWM) inverter. Proposed HPWM inverter eliminated dead-time by lowering switching loss and holding over-shooting.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.210-212
• /
• 2018

A new switching mode has been proposed to obtain high power factor and low THD in single stage AC-DC converter. The conventional voltage mode control in critical conduction mode distorts input current shape with poor THD in flyback topology. Once TRIAC dimmer is connected, visible flicker in the LED lamp is easily detected due to a lack of TRAIC holding current near the input voltage zero cross. The newly proposed method can shape the input current by providing a desired reference voltage so that low THD is obtained by ideal sinusoidal input current in case of no dimmer connection and flat input current performs good TRIAC dimmer compatibility in phase-cut dimming condition. To confirm the validity of the proposed method, theoretical analysis and experimental result from 8W dimmable LED lighting system are presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.833-836
• /
• 2007

A low power and small area source driver using LTPS TFTs is proposed for mobile applications. This source driver adopts level shifter with holding latch function and new R-to-R type digital-to-analog converter (DAC). The power consumption and layout area of the proposed source driver are reduced by 23% and 25% for 16M colors and qVGA AM-OLED panel, respectively.