• Korean Institute of Interior Design Journal
• /
• no.3
• /
• pp.33-37
• /
• 1994

Increasing interest and providing educational experience for the public have long been a major ARt Museum goal. This interest raises the question of how visitors respond to museum exhibits. Much researches have been done which indicate the newer and more interactive exhibits are indeed more didactic and enjoyable than conventional exhibits. This study examined the effectiveness of art exhibits which display information about the creative process of developing a work art along with the final work of art to test if they results in more viewer interest and greater appreciation of the final work of art than those which display only the final work of art. In the early part of the 1991 spring, a counterblancing AB/BA quasi-experiment was carried out in the Jhnson Museum of Art, Cornell University. Methods used to collect and measure visitory interest and appreciation were unobtrusive observation and survey questionnaire. As the indirect measurement of visitor interest, attracting power and holding power were measured by unobstrusive observation of visitor time spent, while the direct measurement of visitor interest and appreciation, visitor's interest, understanding , and degree of favorableness were measured by survey questinnaire. Data analysis reached conclusion that the process approach fine art exhibit designs significantly resulted in more viewer interest and greater appreciation of art work than the conventional fine art exhibit design.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.2
• /
• pp.84-94
• /
• 2013

In case when the existing TRIAC phase controlled dimmer is drove for the LED lighting equipments, there are many problems such as the LED flicker in low phase-angles, the acoustic noise and elements damage by increase of the peak voltage in the input filter capacitor, mulfunction by insufficiency of the TRIAC holding current, and the abnormal oscillation by LC resonant. In this paper, we proposes the single-stage quasi-resonant PSR(Primary Side Regulation) PWM converter, and the design, the simulation and experiment are performed. As a result, it could confirm that the proposed PWM converter is the lighting equipments for LED drive which can alternate the existing 60W class incandescent bulbs and it has the high drive performance of the efficiency 80% and over, the power factor 0.95 and over under the normal voltage 220V. Finally, total harmonic distortion(THD) is gratified with a standard[1] of the lighting equipments and the durability is evaluated as the high reliablilty of 150,000 hours and over.

• Journal of Power System Engineering
• /
• v.15 no.2
• /
• pp.42-48
• /
• 2011

440A martensitic stainless steels which were modified with reduced carbon content(~0.5%) and addition of small amount of nickel, vanadium, tungsten and molybdenum were manufactured. Effects of alloying elements and tempering temperatures on the uniform corrosion in the solution of lN H2S04 were investigated through the electrochemical polarization test. When tempering temperature is constant, corrosion current density in active-passive transition point, Icorr, decreased a little with an increase of austenitizing temperature. In addition to this, when austenitizing temperature is constant, longer holding time showed a little lower Icorr and Ipass, passive current density. And when austenitized at $1050^{\circ}C$ and tempered in a range of $350{\sim}750^{\circ}C$, best anti-corrosion properties were obtained at $350^{\circ}C$ tempering temperature while worst at $450^{\circ}C$ or $550^{\circ}C$. The specimens tempered at below $450^{\circ}C$ and above $550^{\circ}C$, similar and good anti-corrosion characteristics were obtained regardless of alloying elements added, showing anti-corrosion characteristics are influenced more by tempering temperature than by alloying elements.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1397-1405
• /
• 2009

In recent decades, exergy analysis has been holding spotlight as a useful tool in the design, assessment, optimization, and improvement of energy system. This paper presents the results of the energy and exergy analysis of a steam turbine cogeneration system for industrial complex using two efficiency concepts of conventional one and exergetic one. In order to obtain the destroyed exergy of each component, mathematical analysis is conducted by using exergy balance and the second law of thermodynamics, according as the parameters are changed, such as the ratio of returned process steam, process steam supplied, temperature and pressure of boiler and power. The computer program developed in this study can determine the efficiencies and exergy destroyed at each component of cogeneration system. As a result of this study, a component having the largest destroyed exergy was boiler. And closed and opened feedwater heater had the lowest one. The affects to the cogeneration system due to the variation of process steam flow and return rate of condensed water is shown that the total electric power efficiency(${\eta}_E$) is decreased as increasing the return rate of condensed water under constant process steam flow. As the boiler pressure is increased for the more production of electricity, the efficiency of cogeneration system was decreased.

• Journal of the Korean Society of Earth Science Education
• /
• v.6 no.3
• /
• pp.185-195
• /
• 2013

This study has been analyzed various exhibition in Ulsan Museum of Science which was opened in March 2011 and found out the connections between elementary school science and its curriculum. In addition, this study has pointed out how visitors' behavioral patterns change depending on the characteristics of exhibition. The Study has also examined the visitors' satisfaction on the educational effectiveness, facilities and environment of the museum and aimed to seek ways to revitalize and improve the general conditions of exhibition rooms which is essential for Ulsan Museum of Science. The results of analysis on the form exhibition showed that 31.7% were in a passive form and the other 68.2% were in active form which was 43 out of 63 exhibition. After analyzing the visitors behavioral patterns, the majority of exhibition with higher attraction power and holding power were active-type exhibition and especially the experience-type exhibition takes the large portion. Based on the survey, we found out that both students and teachers represent high expectations of pleasure through active experience. They showed high satisfaction rates on the number of exhibition, guide facilities, inside temperature and accessibility of Ulsan Museum of Science.

• Journal of the Korean Society of Safety
• /
• v.15 no.1
• /
• pp.28-35
• /
• 2000

As huge energy transfer systems like a nuclear power plant, steam power plant and petrochemical plant are operated for a long time, mechanical properties are changed by degradation. The life time of the systems can be affected by the mechanical properties. So determination of the integrity of the metallic structure is required either to en4sure that failure will not occur during the service life of the components or to evaluate the lifetime extension of the structure. An automated ball indentation(ABI) method was developed as a non-destructive technique for evaluating the integrity of such metallic components. In this paper, we would like to present the aging evaluation technique by the ABI method. The five classes of the thermally aged CF8M specimens were prepared using an artificially accelerated aging method. After holding 100, 300, 900, 1800 and 3600 hours at 43$0^{\circ}C$, the specimens were cooled down using water to room temperature respectively. The tensile test, hardness test, charpy impact test, ABI test were performed. The results of the fracture test were compared with those of ABI test and the new evaluation technique of the integrity of metallic structures was developed.

• Journal of Power System Engineering
• /
• v.7 no.3
• /
• pp.74-79
• /
• 2003

Alumina($Al_2O_3$) and Al 6061 were brazed by using Al-12wt% Si filler metal in a high vacuum environment. The interfacial microstructure and mechanical properties of the joints were investigated. The results obtained were as follows. (1) The maximum tensile strength of 54Mpa was acquired at the processing conditions of high vacuum ($3{\times}10^{-6}Torr$), $620^{\circ}C$ and 10min, but this condition will not be used in the industrial area due to high evaporation of Al alloy composition. (2) Reaction products for holding time and brazing temperature worked as stress relieve layer and the fractures after the mechanical properties test were occurred to the ceramic side or reaction layer. (3) The glancing angle X-ray diffraction analysis for the reaction product of $Al_2O_3/Al$ 6061 were processed. the joint strengths were low due to existed $Al_2Si_5\;and\;SiO_2$.

• Korean Journal of Food Science and Technology
• /
• v.15 no.4
• /
• pp.379-384
• /
• 1983

Textural changes of glutinous rice cakes during storage at $4^{\circ}C$ were evaluated by ${\beta}$-amylase digestibility and hardness. Some physical properties of starch including X-ray diffraction, swelling power, water holding capacity and gelatinization temperature were investigated. Changes in hardness were inversely related to the enzyme digestibility. The initial hardness for Tongil glutinous rice cake is much higher than that for Traditional one. Both parameters were changed rapidly during one and two days of storage for Tongil and Traditional glutinous rice cakes, respectively. These results implied that the differences in the strach structure might have significant influences on the texture of rice cakes. Sensory evalution revealed that hardness of the rice cakes was highly significant to the storage time and rice variety.

• Design & Manufacturing
• /
• v.2 no.3
• /
• pp.32-39
• /
• 2008

after using dom die, this sheet pressed from a variation condition of size, of die holder power,of rpm speed, accordingly the kind of material, the conditionof deformation movement between both sheets is analyzed, is investigated in the Press machine. even if the change quantity which formed raises a blank holder pressure, the change quantity which is special is not visible from the segment where there is not a bead, the segment where there is a bead to the other side does change quantity schedule to initially and the features of press holding power which the change quantity diminishes is showed consequently from pressurization change quantity it is visible but until a rupture territory from the rpm, it goes but the features where the change quantity does not change a lot is observationd, from the CR2-sheet the quality comes out though well but a possibility of getting a result under same conditions of AL-sheet does not become the formation which stands is. It is like that though press-die which uses the drawing-sheet it exchanges the sheets, when AL-sheet with doing, the conclusion for maintain which have a formation sincerity healthy characteristic is same with afterwords.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.234-241
• /
• 2011

This paper proposes a simple static overmodulation strategy that extends the linearity of the inverter output voltage. The proposed method obtains the reference vector having the instantaneous value directly from the modulation index based on the magnitude of fundamental voltage, and has a simplified form of phase command. This method does not need trigonometric functions for calculating the magnitude of the reference vector. The magnitude of reference voltage and holding angle in the overmodulation region corresponding to the modulation index are determined in advance to have the same fundamental voltage magnitude by using the result of Fourier series expansion.