• Wind and Structures
• /
• 제5권6호
• /
• pp.493-514
• /
• 2002

Seven hip roof building models for $10^{\circ}$, $15^{\circ}$, $20^{\circ}$, $25^{\circ}$, $30^{\circ}$, $35^{\circ}$ and $40^{\circ}$ roof pitch with large overhangs of 1.1 m were tested in a wind tunnel at the university of Roorkee, India to investigate wind pressure distributions over hip roofs for various roof pitch and wind direction. The results show that the roof pitch and wind direction do significantly affect the magnitude and distribution of the roof pressures. The $40^{\circ}$ roof pitch has been found to experience the highest peak suctions at the roof corners amongst the seven hip roofs tested. Pressures on $15^{\circ}$, $20^{\circ}$ and $30^{\circ}$ hip roofs are comparable with those reported by Xu and Reardon (1998). Meecham et al. (1991) for $18.4^{\circ}$ hip roof is compatible with $15^{\circ}$ hip roof of the present study. Holmes's works (1994) on gable roof have also been compared with the present work. Zoning for codification has also been attempted since IS875 (Part-3) does not include this information. A comparison for design value has also been made with BRE Report No. 346.

• 건축역사연구
• /
• 제28권4호
• /
• pp.7-16
• /
• 2019

In this study, I would like to inquire about the composition of oegi(外機) on the hip and gable roof. Oegi purlin compose the basic member of framework of a hip and gable roof in both sides roof, supporting the inside end of the side rafter. However, the oegi purlin is not simply used to form hip and gable roof. The effects of using oegi purlin have the advantages of spatial. The spatial advantages are the width of the toekan(退間) increases as the oegi purlin escapes from column row and to increase the ceiling height by becoming a point of staying the ceiling. That reflect the desire to expand indoor space due to changes in worship behavior. Oegi purlin was used not only for structural needs, but also for altering in indoor space due to the changing times.

• 한국지역지리학회지
• /
• 제22권2호
• /
• pp.369-382
• /
• 2016

본 연구는 제주도 촌락 가옥의 유형과 특성을 고찰하는 연구이다. 제주도 촌락 가옥의 유형을 지붕 형태, 지붕 재료, 외벽 재료를 중심으로 고찰하고, 경남 촌락 가옥의 유형과 비교하면서 그 특성을 논의한다. 이러한 촌락 가옥에 대한 연구는 오늘날의 촌락 경관을 이해하기 위하여 반드시 필요한 연구라고 본다. 제주도 촌락 가옥에서는 우진각지붕이나 우진각지붕/평지붕의 지붕 형태가 가장 많고, 그 다음으로는 단순평지붕 맞배지붕 눈썹평지붕 등의 지붕 형태가 다수를 차지한다. 그리고 컬러강판, 인조슬레이트, 시멘트, 기와/시멘트, 슬레이트/시멘트 등의 지붕 재료 사용 빈도가 높다. 외벽 재료에서는 시멘트를 단일 재료로 사용한 가옥이 과반수를 차지하고, 그 다음으로 현무암석재/시멘트, 타일/시멘트, 타일, 사이딩 등을 사용한 가옥이 많다. 제주도 촌락 가옥은 지붕 형태와 외벽 재료의 특성이라는 측면에서 경남 촌락 가옥과 사뭇 다른 특성을 나타낸다. 제주도 촌락 가옥의 가장 두드러지는 특성으로는 우진각지붕 가옥이 매우 많다는 점, 팔작지붕 가옥이 매우 희귀하다는 점, 현무암석재를 외벽 재료로 사용한 가옥이 많다는 점 등을 들 수 있다.

• 대한지리학회지
• /
• 제51권3호
• /
• pp.441-454
• /
• 2016

이 연구는 지붕 형태, 지붕 재료, 외벽 재료에 초점을 두고 울릉도 산지 촌락 가옥의 유형과 특성을 고찰하는 연구이다. 그리고 울릉도 산지의 촌락 가옥 유형을 제주도와 경남의 촌락 가옥 유형과 비교하면서 그 특성도 논의한다. 울릉도 산지 촌락 가옥의 지붕 형태를 보면, 팔작지붕(42.1%)이 가장 많이 나타나고, 그 다음으로는 맞배지붕(25.8%), 우진각지붕(11.8%), 단순평지붕(10.7%) 등이 많이 나타난다. 지붕 재료를 보면, 컬러강판(69.1%), 아스팔트싱글(11.8%), 시멘트(10.7%) 등이 많이 나타난다. 컬러강판을 지붕 재료로 사용한 가옥이 압도적으로 많고, 기와나 슬레이트를 지붕 재료로 사용한 가옥은 한 채도 없다. 그리고 외벽 재료에서는 시멘트(27.5%), 사이딩(21.3%), 함석(16.8%), 목재(6.7%) 등이 많이 나타난다. 지붕 형태와 지붕 재료의 결합 관계로 본 가옥 유형에서는 팔작지붕-컬러강판 가옥 유형(73채; 41.0%)이 가장 많이 나타나고, 지붕 형태를 중심으로 해서 지붕 재료와 외벽 재료의 결합 관계로 본 가옥 유형에서는 팔작지붕-컬러강판-시멘트 가옥 유형(32채; 18.0%)이 가장 많이 나타난다. 울릉도 산지 촌락 가옥의 지붕/외벽 재료로 함석을 사용하는 빈도가 높은 것, 기와나 슬레이트를 지붕 재료로 사용하지 않는 것, 적벽돌이나 석재를 외벽 재료로 사용하는 빈도가 낮은 것 등은 건축 자재의 운송비용과 관련이 있을 것이다.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.119-123
• /
• 2005

The main purpose of this study is to define an optimum slope of the roof that demands minimum cooling load of the building, when the roof is affected by the solar and wind energy. Two different roof shapes were chosen: hip, gabled. The cooling load of building having those roof shapes was calculated through the computer simulation, using DOE program. For the simulation, the angle of the roof and angle of the orientation was changed. In the conclusion of this paper, an optimum slope of the roof which causes minimize cooling load is presented according to the roof shape and orientation. The result of this study could provide a practical design guideline for determining the roof angle for various climatic conditions.

• 한국멀티미디어학회논문지
• /
• 제17권3호
• /
• pp.393-404
• /
• 2014

본 연구는 전통건축 방식의 지붕곡을 전산학적으로 재해석하고 지붕가구부를 구성하는 부재들간의 기하학적 상관관계를 3D 데이터로 설계하기 위한 방안을 제시한다. 지붕곡을 형성하는 여러 개의 구성 요소, 즉 지붕가구부 부재들간의 상관관계를 전통건축 축조 방식에 근거하여 함수식으로 정의하고 분석된 데이터를 토대로 사용자가 원하는 지붕면을 구성하기 위한 각 부재들의 3차원 데이터 자동 생성 기법을 구현한다. 제안하는 방식은 부재간의 상관관계를 고려하여 지붕곡의 속성이 변경되면 지붕곡에 영향을 미치는 여러 개의 부재들이 자동으로 재설계되는 방식으로써 전통건축 설계의 효율을 높일 수 있다. 또한, 한옥의 다양한 지붕곡 설계를 보장하면서도 체계적인 설계와 규격화된 생산 및 가공을 가능하게 하여 한옥의 보급에 크게 기여할 수 있을 것으로 기대된다.

• 한국주거학회논문집
• /
• 제23권1호
• /
• pp.19-26
• /
• 2012

This study examines how fence demolition may change the thermal environments of external spaces of houses and suggests what factors need to be considered when a fence is demolished. The results of the research are summarized as follows. In terms of the surface temperature, there was no significant difference in all time plots after the removal of all materials. However, applying greening methods (changing the surface materials, planting trees, and building a green roof following fence demolition) could lower the surface temperatures, calling for proper plans for various greening methods. The MRT results indicates that walls block solar radiation and provide shade, reducing radiant heat from roads and surrounding structures during the daytime when solar radiation directly effects surface temperatures. Also, the application of greening methods such as planting vegetation and trees could have shading and evapotranspiration effects, leading to a lower temperature distribution. The HIP results were similar to the MRT results. They indicated that walls block solar radiation within the residential sections and provide shade, resulting in a lower temperature distribution during the daytime. However, areas where greening methods such as a green roof or tree planting were applied showed $1{\sim}2^{\circ}C$ difference in temperature distribution.

• 건축역사연구
• /
• 제8권3호
• /
• pp.23-38
• /
• 1999

The purpose of this study is to analogize the appearance of Korean Ancient Architecture in view of the Stone Remains from 3 Kingdom Period to Unificated Shilla Period. But in these period, there is no building remains but some stupas and fine arts. Especially, there are many architectural appearance and revealing signature in these Historical Stone remains. Architectural elements which are analogized by stone remains what has value as historical materials by preservation of original form from 3 Kingdom Preiod to Unificated Shilla Period are as follows : 1) Platform, the representative characteristic of Korean traditional architecture, was frame structure and accumulate structure. And circular or square footing stood a same shape column on it is put on the platform. 2) In the case of column, there used entasis column and inclined column and circular chamfer technique was applied on the top side of it. Upper side of column, capital and head pentrating tie that small bearing block was put on the center of it was joined. And longitu야nal rest(長舌) supported a cross beam. Capital and small bearing block had no bottom heel, and heel side was curved and straight. Centered bracket structure was often used, and multi bracket structure is not used yet. Inward incline technique was used. 3) Inward opening pair door which had lintel, threshold, doorjamb was usually used, Fixing stone was used for structural safety, and circular handle and lock was used for decoration. Handrail was used on the edge of wooden floor for decorative effect and safety. 4) Square rafter and circular rafter were used in the same period and so did flying rafter. Double eaves and single eave were used in the same period but, single eave was usually used. In this period, square rafter was usually used. This would be studied more by comparing with Japanese wooden architecture. 5) Hipped roof was used and half-hipped roof was not used yet. In front of th hip, there are small sculpture called Jap-Sang(雜像), and windbell was hang on the end of the hip rafter. Concave roof tile, convex roof tile, round eaver tile, decorative tile at end of roof ridge were used. Lotus style was well used on the face of roof tile for decoration. From the results of this study, wooden architecture of Unificated Shilla period was simple compare to Koryo dynasty and Chosun dynasty but, it had some brilliant character. It was hard work that analogized the form of non-existent wood architecture of Ancient Korean period by restricted stone remains. But, in addition to the results of this study and research of old documentations, more study should be go on.

• Wind and Structures
• /
• 제19권1호
• /
• pp.15-33
• /
• 2014

This paper describes partial turbulence simulation and validation of the aerodynamic pressures on building models for an open-jet small-scale 12-Fan Wall of Wind (WOW) facility against their counterparts in a boundary-layer wind tunnel. The wind characteristics pertained to the Atmospheric Boundary Layer (ABL) mean wind speed profile and turbulent fluctuations simulated in the facility. Both in the wind tunnel and the small-scale 12-Fan WOW these wind characteristics were produced by using spires and roughness elements. It is emphasized in the paper that proper spectral density parameterization is required to simulate turbulent fluctuations correctly. Partial turbulence considering only high frequency part of the turbulent fluctuations spectrum was simulated in the small-scale 12-Fan WOW. For the validation of aerodynamic pressures a series of tests were conducted in both wind tunnel and the small-scale 12-fan WOW facilities on low-rise buildings including two gable roof and two hip roof buildings with two different slopes. Testing was performed to investigate the mean and peak pressure coefficients at various locations on the roofs including near the corners, edges, ridge and hip lines. The pressure coefficients comparisons showed that open-jet testing facility flows with partial simulations of ABL spectrum are capable of inducing pressures on low-rise buildings that reasonably agree with their boundary-layer wind tunnel counterparts.

• 한국환경과학회지
• /
• 제20권9호
• /
• pp.1105-1114
• /
• 2011

In this study, thermal environment improvements throughout public design improvement project on the urban street space were compared and evaluated. Thermo-Render 3.0, 3D-CAD based thermal environment simulation program, had been used for thermal environment improvement evaluations. Followings are the results. First, clayey blocks which have low heat transfer rate and cool island effect by trees and roof gardens brought cooling effects for buildings and surface of streets. Seconds, MRT values showed low levels because of low radiant mulching materials. Thirds, roof gardens contributed to reduce heat island effect since HIP levels were affected by decreasing heat storage effect of buildings from roof gardens. As a result, reducing heat storage effect throughout selecting and arranging proper materials which would not increase heat island potentials should be performed to improve heat island effects.