• Journal of the Korean Wood Science and Technology
• /
• v.50 no.5
• /
• pp.365-374
• /
• 2022

Today, commercialized Hinoki cypress cubes are used for fragrance, humidification, and pillows in Korea. In this study, the sound absorption ability of Hinoki cypress (Chamaecyparis obtusa) cubes was examined. The three groups of Hinoki cypress cubes were prepared depending on their dimension (L: 9 × 9 × 9, M: 7 × 7 × 7, S: 4 × 4 × 4 mm). Their sound absorption coefficient was examined after filling 6, 8, 10, and 12 cm height in impedance tubes, respectively. Overall, the sound absorption ability depending on dimension was superior in the M group compared to the L and S groups. Also, as the filling height increased, the sound absorption capacity increased. In sum, noise reduction coefficients (NRC) of all Hinoki cypress cubes were 0.41-0.59. Thus, this research found that Hinoki cypress cubes have a sound-absorbing function.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.5
• /
• pp.536-544
• /
• 2017

The effects of catalysts addition on the pyrolysis reaction of biomass have been studied in a thermogravimetric analyzer (TGA). The sample biomasses were Bamboo, Pine and Hinoki. The catalysts tested were K, Zn, Cu metal compounds. The pyrolysis reactions were tested in the nonisothermal condition from the room temperature to $550^{\circ}C$ at a heating rate $50^{\circ}C/min$ on the flowing of $N_2$ purge gases. Cellulose contents of Bamboo was higher than that of Pine and Hinoki. As the results, the pyrolysis reaction of volatile matter was finished near the temperature $450^{\circ}C$. The initial decomposition temperatures of the volatile matters ($T_i$) were $165^{\circ}C$ for Bamboo, $190^{\circ}C$ for Pine, and $193^{\circ}C$ for Hinoki. $T_i$ decreased with increasing the catalyst amounts in the sample biomasses. The temperature of maximum reaction rate ($T_{max}$) were $338^{\circ}C$ for Bamboo, $378^{\circ}C$ for Pine, and $377^{\circ}C$ for Hinoki. The effects of catalysts addition on the $T_{max}$ were to decreased it. The reducing effects about $T_{max}$ was the most effective for K metal compounds catalyst. The char amounts remained after pyrolysis at $550^{\circ}C$ were 26.2% for Bamboo, 20.7% for Pine, and 20.9% for Hinoki. The char amounts increased with the catalyst amounts.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.1-13
• /
• 2019

In this study, eco-friendly functional leather was developed by recycling wastes such as eel skin, marigold(Tagetas erecta l.), hinoki cypress(Chamaecyparis obtusa). The hot water extracts of marigold and hinoki cypress leaves were freeze-dried at $-80^{\circ}C$ to prepare colorant powder. The dyeing of eel leather with marigold was carried out to investigate the effects of dyeing conditions, mordanting on dye uptake, color, morphological change, and color fastness. Considering shrinkage of eel leather caused by dyeing, the optimum dyeing conditions were $60^{\circ}C$ of dyeing temperature and 60 min of dyeing time at 1:100 of bath ratio, and color of the dyed eel leather was Y to YR Munsell series. In order to prevent the degradation of leather from microbe, we conducted combination dyeing with marigold and hinoki cypress leave colorants. In this case, the combination dyed eel leathers showed excellent antimicrobial activity with above 99% bacterial reduction rate against S. aurieus and K. pneumoniae. It was confirmed that all of the dyed eel leathers were sufficient to meet the Korean Standard for color fastness of leather products. It can be applied practically for the development of eco-friendly functional leather by utilizing some useful active components extracted from plant resources and by recycling food wastes.

• Korean Journal of Veterinary Service
• /
• v.32 no.1
• /
• pp.87-92
• /
• 2009

The avoidance of the allergen of the house dust mite is one of the challenges to reduce and treat the symptoms of allergic diseases. Accordingly, various acaricidal agents are being used to kill the mite, but just killing it leaves the remains of it, which still act as the allergen. Therefore expelling the mite is thought as best policy to avoid the mite allergen. For this, some materials have been applied to repellent agents against the mite. Among them, a material with natural origin, known as the phytoncide, is being used for its repellent activity, as well as for its benefits for health. In this experiment, essential oils extracted from Korean white pine (Pinus koreaiensis S. et Z.) and hinoki cypress (Chamaecyparis obtusa), which are widely used as the source of phytoncide products, are studied for demonstration of the repellent effect against the house dust mites, Dermatophagoides farinae and D. pteronyssinus. Direct contact method was used to evaluate the repellent effect (%). And the results suggest the oils have a significant effect enough to be used as a source of repellent agent. For the repellent effect, the most effective concentration was $0.5{\mu}l/cm^2$ at 45 minutes both in the white pine and the hinoki oil.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.747-757
• /
• 2014

Since the air contamination by air pollutants from indoor construction materials and daily supplies has been increased in recent decades, the public interest of using environmentally friendly products and improving indoor air quality also attracted much attention. As known as effects of phytoncide, it has been used in construction materials and daily supplies with various method. In this study, hinoki cypress (Chamaecyparis obtusa) was used because of its high contents of phytoncide. The leaves of hinoki cypress (C. obtusa), which generated by pruning, were extracted by steam distillation, and then used as humidification water source. Volatile organic compound (VOC) from C. obtusa were characterized by GC-MS (Gas chromatograph-Mass spectrophotometry) in order to evaluate effects and risks of using C. obtusa extracts. Total 86 types and 116 types of VOC were detected from distilled water (DI water) and C. obtusa extracts, respectively. Aromatic compounds (DI water: 13 types, 53%; C. obtusa extracts: 13 types, 38%) and terpenoids (DI water: 16 types, 23%; C. obtusa extracts: 23 types, 33%) were detected more diverse types and higher amount than other compound categories. No additional aromatic compounds were found from C. obtusa extracts, so C. obtusa extracts did not affect on aromatic compounds emission. However, in terpenoids, total amount of emission from C. obtusa extracts increased to 33% from 23% (DI water) and 7 more types of compounds were found from C. obtusa extracts. Especially, from C. obtusa extracts, terpinen-4-ol was emitted 71 times higher than DI water. During the humidification with C. obtusa extracts, emitted terpenoid compounds were well known for higher anti-bacterial, anti-insect, and anti-septic functions, but also these had anti-hypertensive and anti-cancer activities. Therefore, terpenoids from C. obtusa extracts can help to improve public health by using humidifier.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.4
• /
• pp.347-350
• /
• 2011

Biofilms are surface-attached microbial communities with phenotypic and biochemical properties distinct from free-living planktonic cells. Biofilm bacteria show much greater resistance than planktonic counterparts and much higher concentration of biocide is needed to treat biofilms compared to the dosage used for planktonic bacteria. As a result, alternative strategies or more effective agents exhibiting activity against biofilm-producing micro-organisms are of great interest. Therefore, we turned our attention to control of biofilm of S. aureus. The aims of this research are to investigate substances which inhibit the formation of biofilm by S. aureus and to suggest effective materials for controlling skin problems. We coated slide glasses with human placental collagen and the coverslip was incubated with test materials and bacteria. The coverslip was stained with crystal violet and we measured optical density of each sample. The biofilm inhibitory activity was calculated by crystal violet staining degrees. In this study, S. aureus ATCC 6538 was used as test organism. Our results show that both water soluble and insoluble Hinoki cypress polysaccharide strongly inhibited biofilm formation. Whereas, green tea and sunset hibiscus root extract promoted biofilm. Xylitol showed a concentration dependent effect; high concentration (3 % and 5 %) of xylitol reduced biofilm while promoted biofilm formation at a concentration of 1 %. These results support that Hinoki cypress polysaccharide and xylitol have ability to suppress biofilm formation.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.425-441
• /
• 2019

In this study, sound absorption capability and sound transmission loss of several kinds of target densities and thickness for six species of wood bark particle were estimated by the transfer function and transfer matrix methods. Resultantly, the mean sound absorption coefficient of a 100-mm thick Hinoki wood bark particle mat was 0.90 in the frequency range of 100-6400 Hz, whereas the mean sound absorption rate of a 50-mm thick Hinoki wood bark particle mat was 0.84 in the same frequency range. Particularly, at a thickness of 100 mm, it reached almost up to 100% in the frequency range of 1 KHz. The sound transmission losses of 100-mm thick Hinoki wood bark particle mat with a target density of 0.16 at 500 and 1000 Hz were 15.30 and 15.73 dB, respectively. When a 10-mm thick plywood was attached to the back of the wood particle mat, the sound transmission losses was increased by 20-30 dB. Wood bark can be used as an acoustical material owing to its high sound absorption rate and transmission loss.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2005.04a
• /
• pp.155-155
• /
• 2005

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.72-81
• /
• 2011

These days, beds have been developed not as furniture to sleep in but Healthcare Furniture. The function of heating, non-electronic-waves and far-infrared rays have been added. Also, eco-friendly materials such as stone, mud, rubber and wood are combined to them together with the radiation-heating method using heat conduction through electronic coil and hot water circulation. Modern people suffer from stress and fatigue. The hot issue is "health." Focused on the health, the development of design for beds considering the influence electronic waves, anions, deep sleep and the density of toxic materials have on human bodies has become urgent. In this study, the trend, specification and efficiency of the functional health-related electronic coil technology are analyzed. Through the analysis, the environmental standards are set. According to them, technology, eco-friendly materials and additional functions for the development of the design are considered. Also, the government is promoting the IEC international standardization for the Korean traditional floor heating style beds. In preparation for that, we adopted new HPT method technology. It enables non-electronic-waves, low electricity and stable temperature maintenance control for the warm top and the cool bottom. Also, the head boards and the frames of the beds can be separated. Through this separation, the beds can be easily moved or installed. Eco-friendly materials such as Hinoki cypress wood and red clay and the existing tables function are combined to the head boards so they can be used as drawers and display shelves. If they are used as separate items, they can be used as covers. This is how we suggest the design for the heating beds.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.488-502
• /
• 2020

In this study, the moisture absorption and desorption properties presented by the Health-Friendly Housing Construction Standards of South Korea were compared using the wood of three tree species (Douglas-fir, Hinoki, Larch) and two types of wood-based materials(Plywood, WML Board^Ⓡ). The national standards for functional building materials present that the amounts of moisture absorption and desorption should be at least 65g/㎡ on average, respectively according to the test method under KS F 2611:2009. Therefore, in this study, the moisture absorption/desorption properties of materials with no treatment (Control), with punching, and with surface stain finishing and the moisture absorption/desorption property improvement effects of the treatments were compared and analyzed. According to the results of this study, it was evaluated that all five types of wood and wood-based materials tested did not satisfy the amount of moisture absorption/desorption of at least 65g/㎡, which is the performance standard for moisture absorption/desorption functional building materials, indicating that untreated wood and wood-based materials cannot be applied as functional finishing materials according to the Health-Friendly Housing Construction Standards. The surface stain finishing greatly reduced the moisture absorption and desorption rates of the materials, and the amounts of moisture absorbed and desorbed were also shown to decrease by at least two times on average. When the surfaces of the materials were punched with Ø4mm holes at intervals of 20 mm, the moisture absorption/desorption areas increased from 18% to 51%, and this increase was shown to be capable of increasing the amounts of moisture absorbed/desorbed by 29% on average at the minimum, and 81% on average at the maximum. The effects of punching were shown to be identical even in cases where the materials were stain finished. For the application of wood or wood-based materials as eco-friendly, health-friendly, and moisture absorption/desorption functional building materials hereafter, it is judged that new physical and chemical improvement studies should be conducted, and treatment methods should be developed.