• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.21-30
• /
• 2005

교통량 자료는 도로의 계획, 설계 및 운영 등에 폭넓게 활용되는 자료이다. 일반국도를 대상으로 1955년부터 전국 규모의 교통조사가 시행되고 있으며, 도로의 결절점을 기준으로 구간을 설정한 후 상시조사를 실시하고 있다. 그러나 전 구간에서 상시조사를 수행하는 데에는 한계가 있기 때문에 우선순위를 결정하는 것은 중요한 문제이다. 본 연구에서는 우선순위 결정을 위한 방법론으로 AHP(Analytic Hierarchy Process)를 적용한 다기준 의사결정 기법 (MCDM : Multiple Criteria Decision Making)을 적용하였다. 판단 기준변수로는 도로계획 [AADT, VKT, 첨두시간 교통량, 도시부유출입구간] 도로설계 [Volume(pcu), 방향별교통량, 중차량비], 그리고 도로운영 (속도, 밀도, V/C)으로 정의하였다. 평가자료를 정량화 및 규준화하였고, 설문조사를 통해 얻은 쌍대비교 값들을 가지고 고유벡터 방법으로 계층별, 가중치를 구하였다. 교통량 조사구간에 대한 교통조사 우선순위 선정은 규준화 값과 계층별, 가중치를 곱하여 구한 대안 값의 전체 합의 크기에 따라 결정하였다. 이를 통하여 상시 교통량 조사를 위해 다수의 구간으로 분할된 일반국도를 대상으로, 상시 교통량 조사 지점 우선순위를 결정하였다.

• 대한교통학회지
• /
• 제31권5호
• /
• pp.48-59
• /
• 2013

본 연구에서는 도로투자 사업으로 인한 편익 중 일반적으로 계상하고 있는 통행시간 절감 및 차량운행비용 절감 등 직접적인 편익 이외에 추가적으로 이용자입장에서 체감할 수 있는 도로 주행 중 운전쾌적성 편익을 산정하고자 운전쾌적성의 정의를 마련하였고 운전쾌적성 산정방법론을 개발하였다. 도로특성(도시부/지방부) 및 차량 밀도(차간거리)에 따른 이용자의 지불용의액을 CVM 방법 중 가장 최근에 활발히 활용되고 있는 이중양분선택형(double-bounded dichotomous choice)질문법을 활용하여 설문조사한 후 그 결과를 로짓모형에 적용하여 운전쾌적성 가치를 도출하였다. 도시부 및 지역간 도로에서 공히 지불용의액의 크기는 전반적으로 기존 차간거리가 짧을수록 큰 것으로 분석되었고, 도로의 차간거리 변화가 같더라도 사업 전의 차간거리와 사업 후의 차간거리에 따라 지불용의액이 다른 것으로 나타났다. 즉, 도로의 차간거리가 증가하더라도 기존 차간거리가 어느 정도인지에 따라 지불용의액이 다르게 나타나 지불용의액이 기존 차간거리에 영향을 받는 것으로 분석되었다.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.91-98
• /
• 2014

PURPOSES : This study is to develop a automate road mapping system using ARASEO(Automated Road Analysis and Safety Evaluation TOol) for road management. METHODS : The road survey van named ARASEO(Automated Road Analysis and Safety Evaluation TOol) was used to generate highway drawings for Korea National Road number 37 automatically. In order to generate the highway drawings for purpose of road management, it is required to acquired the information for highway alignment, road width and road facilities such as safety barrier and road sign. Therefore the survey van acquired and analyzed the road width, median and guardrail data using rear side laser sensor of ARASEO and recognized the traffic control sign and chevron sign using foreside camera images. Also the highway alignment which is the basic information for highway drawing can be analyzed by acquisition the every 1m positional and attitude data using GPU and IMU sensor and developed algorithm. Finally, in this research the CAD based drawing software was developed to draw highway drawing using the analysis result from ARASEO. RESULTS : This study showed the comparison result of the surveyed road width and drawing data. To make the drawing of the road, we made the Autocad ARX program witch run in CAD menu interface. CONCLUSIONS : Using this program we can create the road center line, every 500m horizontal and vertical ground plan drawing automatically.

• 대한교통학회지
• /
• 제25권2호
• /
• pp.157-165
• /
• 2007

본 연구에서는 GPS(Global Positioning System), INS(Inertial Navigation System), DMI(Distance Measuring Unit) 등 각종 센서를 장착한 차량을 이용하여 차량의 위치정보와 자세정보를 취득하고, 취득된 차량의 주행정보를 이용하여 도로 종단선형을 분석할 수 있는 알고리즘을 개발하였다. 개발된 종단선형 분석 알고리즘은 도로의 종단경사, 종단곡선 시종점 및 도로 종단곡선 길이 등을 분석할 수 있고, 종단경사와 종단곡선을 모형화하였다. 또 개발한 알고리즘의 현장 적용성을 검증하기 위하여, 실제 도로에서 취득한 데이터를 이용하여 종단선형을 분석하였고, 이 결과를 도면과 비교하였다.

• Journal of Construction Engineering and Project Management
• /
• 제8권1호
• /
• pp.1-9
• /
• 2018

US transportation agencies are dealing with shrinking budgets, limited work forces, and deteriorating infrastructure. In order to cope with funding uncertainty, state highway agencies are now looking into their own organizations and identifying programs, practices, and processes that have potential for cost saving. A quality assurance (QA) program is an integral part of highway construction and ensures a project's contracted level of quality. The cost of quality (conforming and nonconforming) can constitute a sizable part of total construction cost. As the quality assurance programs evolved, various practices and processes were developed over time and later adopted by state highway agencies. These practices and processes include different QA standards and specifications, varying testing methods, central testing lab vs. on site testing, performance based vs. prescribed quality assurance practices, implementation of innovative quality assurance practices, etc. Therefore, there is an opportunity to assess different QA strategies and recommend those practices that are effective and cost efficient. A national survey was conducted by the authors, which provided a detailed mapping of various QA practices and processes used as part of QA programs and identified areas where agencies can focus on for cost savings. The survey found that QA sampling and testing plans, optimization of sampling plans, optimization of QA standards and specifications, and implementation of innovative test methods and processes are the main areas the agencies should focus to lean the current QA programs.

• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.41-47
• /
• 2005

교통량, 속도, 차종 등으로 대표되는 교통자료는 도로를 계획하고 설계하는데 있어 매우 중요한 기초자료로 활용된다. 교통자료를 기준으로 해당 도로의 장래 서비스수준을 예측하며, 신설 및 확장될 도로의 기하구조가 결정되기 때문이다. 1985년 이후부터 건설교통부에서는 일반국도에 대해서 수시 교통량 조사와 상시 교통량 조사를 병행하고 있다. 이러한 교통조사는 일반국도와 일반국도 또는 일반국도와 고속국도가 만나는 네트웍 상의 노드를 중심으로 교통조사 구간을 설정하고, 이들 교통조사 구간에 대해서 교통량 조사를 수행하고 있다. 이러한 교통조사구간 설정 방법은 주요 도로가 만나는 결절점 사이의 구간에서는 교통량 변화패턴이 유사하다는 것을 전제로 하고 있다. 최근 우회도로의 신설, 중앙분리대 설치 등의 도로 기하구조 및 교통 시설물의 설치로 인하여 기존 구간의 특성이 변화되었다. 따라서 전국 일반국도를 대상으로 교통조사 구간의 유사성을 평가하여 국도의 동질성 구간에 대한 분석을 수행하였다. 유사성 평가를 위해서는 유전자 알고리즘을 적용한 모형을 구축하고, 모형의 적용을 통해 교통조사 구간을 정의하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.197-203
• /
• 2003

Korea Highway Corporation(KHC) began the ambitious KHC Test Road construction project from 1997. It is 7.7km long two-lane highway next to the mainline of Jungbu Inland Expressway. The KHC Test Road construction was completed at the December 2002. It is composed of twenty-five PCC test pavement sections. Section design parameters are (1) concrete slab thickness, (2) base type, (3) base thickness (12, 15, and 18cm), and (4) pavement type. Twenty-five PCC test pavement sections contain 1241 sensors to evaluate the behavior of pavement system under traffic load and environmental change. The behavior of pavement systems will be identified by the observation of sensor measurement and pavement distress survey from test pavement sections. The Test Road research outcome will validate the Korean Pavement Design Guide which is develop by on-going funded research from the Ministry of Construction and Transportation.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.380-387
• /
• 2009

In the past, many state Departments of Transportation (DOTs) in the U.S. managed their highway assets on a "worst first" basis and planned their highway projects in a tactical rather than strategic fashion. Due to increasingly tight highway budgets and recognition of long term benefits of asset management systems, the Federal Highway Administration (FHWA) has strongly pushed and encouraged state DOTs to implement asset management for managing their highway assets and highway projects. Currently, many DOTs have actively implemented and are in the process of applying this asset management concept for their highway infrastructure. However, different DOTs are developing different asset management systems because of their different organizational structures, data management structures, relationship with the legislature, and investment priorities. This study first identifies asset management indicators which are essential to successfully implementing asset management systems for State highway assets. The research team conducted a survey of asset management experts and reviewed the practices and policies of leading DOTs in asset management. Based on these indicators, this study develops an Asset Management Assessment Model (AM²) for different asset management systems. This model can be used by different DOTs to evaluate their current asset management systems and identify their strong areas and also their weak areas to improve in order to fully benefit from the advanced concept of asset management.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.233-238
• /
• 2004

In this study, speed survey has been conducted on Pusan Freeway to identify actual running speed. therefore, suggest that Highway Design Regulations and Highway Design Standard from Ministry of Construction and Transportation, which requires stopping sight distance for 20% less speed when rainy condition in accordance with Highway Safety Act, is not coincident with driver's characteristics. Consequently, it is prudent to compute stopping sight distance with 85th percentile running speed, considering driver's actual behavior and mountainous terrain.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.155-165
• /
• 2013

PURPOSES : Benefits for improvement of travel time reliability obtained from construction of new highways should be considered as a major factor in the feasibility study for highway constructions. The purpose of this study is to develop a method of estimation for the value of travel time reliability. METHODS : Highway type (urban/rural highway) and traffic flow type(interrupted/uninterrupted) was considered to estimate he value of travel time reliability. And Double-bounded Dichotomous Choice among Contingent Valuation Method(CVM) was applied to survey the willingness-to-pay of drivers when travel time reliability is improved. Finally the value of travel time reliability was estimated using the results of survey and logit model. The value of travel time reliability was estimated considering travel objectives, time constraint travel and non-time constraint travel. RESULTS: The value of travel time reliability of business trip is higher than that of non-business trip. The value of travel time reliability of time constraint travel is higher than that of non-time constraint travel. The value of travel time reliability in urban area is higher than that in rural area. CONCLUSIONS: It was concluded that the proposed method in this study is more realistic and proper to estimate the value of travel time reliability because it reflects the situations of time constraint travel and non-time constraint travel.