• Journal of Korean Society of Transportation
• /
• v.31 no.6
• /
• pp.22-33
• /
• 2013

Currently average daily traffic using Hi-pass has increased over 3 times that of 2008 and more than half of highway traffic now uses High-pass. At this juncture, reassessment on the overall operation of Hi-pass is required to improve the safety aspect of toll booths and the flow of traffic. Although existing Hi-pass operation manual presents the methods of alignment, they do not reflect actual forms of vehicles and do not properly take the safety of toll booth and flow of the traffic into consideration. In order to compensate these problems, this study classifies highway tollbooths into two categories of mainline type and interchange type, and establishes the standard of lane alignment by traffic conflict analysis based on the types divided according to geometric structure or environment around the tollbooths. In addition, traffic flows around the tollbooths were reflected with the stage to arrange Hi-pass lanes according to the volume of traffic on the lanes for Hi-pass.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.175-185
• /
• 2011

Geometric information is a key element for evaluating traffic safety and road maintenance. This study developed an algorithm to identify horizontal alignment using global positioning system(GPS) and inertial navigation system(INS) data. Roll and heading information extracted from GPS/INS were utilized to classify horizontal alignment into tangent, circular curve, and transition curve. The proposed algorithm consists of two components including smoothing for eliminating outlier and a heuristic classification algorithm. A genetic algorithm(GA) was adopted to calibrate parameters associated with the algorithm. Both freeway and rural highway data were used to evaluate the performance of the proposed algorithm. Promising results, which 90.48% and 88.24% of classification accuracy were obtainable for freeway and rural highway respectively, demonstrated the technical feasibility of the algorithm for the implementation.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.71-79
• /
• 2011

Korean national highway has been increased 2 times more for the past ten years because of many highway geometric improvements and new routes since 2000. According to the reasons, maintenance cost has been increased continuously. Deterioration of concrete bridge decks caused by asphalt pavement deformation occupies a high proportion of overall bridge management budget. The number of current highway bridges has reached over 7,800 in 2011, and It is difficult to determine to some future budget. This study predicted the remaining life of concrete bridge decks using the reliability analysis based on Weibull distribution. and The expected future maintenance cost was estimated.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.21-40
• /
• 2003

A traffic accident analysis method was developed and tested based on the highway alignment risk indices using geographic information systems(GIS). Impacts of the highway alignment on traffic accidents have been identified by examining accidents occurred on different alignment conditions and by investigating traffic accident risk indices(TARI). Evaluative criteria are suggested using geometric design elements as an independent variable. Traffic accident rates were forecasted more realistically and objectively by considering the interaction between highway alignment factors and the design consistency. And traffic accident risk indices and risk ratings were suggested based on model estimation results and accident data. Finally, forecasting traffic accident rates, evaluating the level of risk and then visualizing information graphically were combined into one system called risk assessment system by means of GIS. This risk assessment system is expected to play a major role in designing four-lane highways and developing remedies for highway sections susceptible to traffic accidents.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.125-133
• /
• 2008

Achieving consistent geometric design is an important goal in highway design to ensure obtaining safe, economical and smooth traffic operation. Most evaluation of consistency is based on 'speed change' in speed profile. According to literature, the speed depends on geometric elements, speed on tangent section prior to a curve, and background around roads. Especially, the radius is the most main element mentioned in various literature. Therefore, this paper shows two ways of calculating horizontal radius on real road, that is, three-dimensional road. First of all, the radius of horizontal curve is calculated based on physical method. The calculated radius contains not only superelevation but also longitudinal grade while the current minimum radius is calculated by considering superelevation and side friction according to the point-mass equation. Secondly, the problem of composed curves with distorted appearance by overlaying sag or crest vertical alignment has been known. To quantify the extent of distortion effects, the method of calculation of real seen so called 'Perspective Radius' is developed. The paper presents the perspective radius and recommended perspective radius.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.19-28
• /
• 2007

Korea's national highways, which emphasize a high level of mobility, serve primarily intercity travel and are used as a detour for freeways. However. at the present. the highways do not have consistent geometric features or other characteristics: for example. some highways have full access control and others have uncontrolled access. Generally, geometric and traffic conditions affect Pronouncedly travel speeds in the highway sections. This study focused on the effect of signalized intersection relative factors on the speeds: signalized intersection densities, signal phases, and volume levels. The study shows that signalized intersection density was the strongest variable affecting the travel speeds: the speeds held fairly constant over intersection densities below 0.3 intersections/km, decreased sharply through intersection density of 0.7 intersections/km. and appeared constant at the lowest level over intersection densities above 0.7 intersections/km. The results also indicate that the effect of signal and traffic volume levels on the speeds was similar to that of the signalized intersection density.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.156-168
• /
• 2024

Purpose: The trend of highway traffic accidents shows a repeating pattern of increase and decrease, with the fatality rate being highest on highways among all road types. Therefore, there is a need to establish improvement measures that reflect the situation within the country. Method: We conducted accident severity analysis using Random Forest on data from accidents occurring on 10 specific routes with high accident rates among national highways from 2019 to 2021. Factors influencing accident severity were identified. Result: The analysis, conducted using the SHAP package to determine the top 10 variable importance, revealed that among highway traffic accidents, the variables with a significant impact on accident severity are the age of the perpetrator being between 20 and less than 39 years, the time period being daytime (06:00-18:00), occurrence on weekends (Sat-Sun), seasons being summer and winter, violation of traffic regulations (failure to comply with safe driving), road type being a tunnel, geometric structure having a high number of lanes and a high speed limit. We identified a total of 10 independent variables that showed a positive correlation with highway traffic accident severity. Conclusion: As accidents on highways occur due to the complex interaction of various factors, predicting accidents poses significant challenges. However, utilizing the results obtained from this study, there is a need for in-depth analysis of the factors influencing the severity of highway traffic accidents. Efforts should be made to establish efficient and rational response measures based on the findings of this research.

• International Journal of Highway Engineering
• /
• v.7 no.2 s.24
• /
• pp.77-86
• /
• 2005

A spalling model for jointed connote pavements(JCP) was developed using the data of distresses, climates, and materials at the sections of long-term pavement performance(LTPP) investigation. The total of forty-four spatting distress data was collected at twenty-two JCP LTPP sections in 1999 and in 2004. In addition, the data of climates, geometric shapes of the slabs, and material properties was also collected at those times. Factors significantly influencing the spalling distress were found by a sensitivity analysis for the data. Consequently, a spatting model was developed by a multi-regression analysis for the factors. The model showed reasonable trend of the spatting development comparing to other foreign models.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.133-142
• /
• 2014

PURPOSES : The objective was to develop the advanced method which could not explain each observation's specific characteristic in the present negative binomial method that results in under-estimation of the standard error(t-value inflation) and affects the confidence of whole derived results. METHODS : This study dealt with traffic accidents occurring within interchange segment on highway main line with RPNB(Random Parameter Negative Binomial) method that enables to take account of heterogeneity. RESULTS : As a result, AADT and lighting installation type on the road were revealed to have random parameter and in terms of other geometric variables, all were derived as fixed parameter(same effect on every segment). Also, marginal effects were adapted to analyze the relative effects on traffic accidents. CONCLUSIONS : This study proves that RPNB method which considers each observation's specific characteristics is better fitted to the accident data with geometrics. Thus, it is recommended that RPNB model or other methods which could consider the heterogeneity needs to be adapted in accident analysis.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.97-107
• /
• 2008

I study for design criteria and research about Interchange diverging area of express highway and freeway, the most recent, at interchange diversion of express highway and freeway, design criteria and researches are focus on safety guarantee a point of view movement dynamics of vehicle and road geometric as to transition section, deceleration section, curve radius, nose section, outflow angle etc, that is, design criteria and research of Interchange diverging area have not consider a point of view movement dynamics of vehicle and road geometric and driver, so that I will be focus characteristic of runing speed on trasion curve. and I will consider vehicle running speed characteristics and study problem of Interchange diverging area design criteria. For this study, First, analysis meaning about theory of now design criteria, Second, look at vehicle running speed and traffic accident characteristics of Interchange diverging area, Third, propose new deceleration transition curve design method get along vehicle running speed characteristics of Interchange diverging area. new deceleration transition curve design method put out new outcoums, that is, I definite cause to safety new deceleration transition curve design method better than pressently, used design criteria of Interchange diverging area, especially, deceleration transition curve design criteria produced good result in the running speed 50km/h, 40km/h, that is inertia better than inertia of present used design criteria. and deceleration transition curve is extended better than present transition curve criteria, so that new deceleration transition curve design method safety is good better than the past method safety.