• 한국지형공간정보학회:학술대회논문집
• /
• 한국지형공간정보학회 2005년도 한.일 GIS 도로사면 관리세미나
• /
• pp.19-34
• /
• 2005

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 1999년도 제2회 학술발표회
• /
• pp.217-239
• /
• 1999

일반적으로 사면에 대한 조사방법은 지표지질조사를 실시하여 불연속면의 정보를 획득하는 것이 보편화 된 방법이나 제한된 영역의 정보만을 획득하게 되는 문제점을 가지게 된다. 일반적으로 절취사면에서 활동면 또는 활동가능면을 추정하는 방법으로 토모그래피, 전기비저항탐사, 탄성파 탐사와 같은 지구물리탐사 방법을 이용하나 최근에 사용된 카메라 장치를 이용하는 방법은 시추공벽의 화상을 촬영하여 직접 육안으로 확인 할 수 있는 방법으로 다른 방법들에 비해 보다 확실한 방법이라고 생각된다. 그러므로 본 논문은 고속도로 현장에서 붕괴가 발생된 사면의 활동면 위치를 파악하기 위해 총 4 개공의 시추를 실시하였고 BIPS(Borehole Image Processing System) 장비를 도입하여 활동면의 위치를 파악하였다. 그 결과, 철탑구간은 지표에서 20m 하부구간까지 암질이 매우 불량하고 점토층이 충전된 파쇄대층이 존재하고 철탑좌측구간은 이미 인장균열이 발생되었으며 점토층이 충전된 층리면 존재하고 층리면은 사면방향으로 경사져 붕괴가능성이 클 것으로 나타났다. BIPS 결과는 사면안정대책 방안에 수립하는 데 이용하여 억지말뚝으로 사면보강공을 선정하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권1호
• /
• pp.101-110
• /
• 2000

In case heavy rainfall is a key factor of slope failure, the failure zone is usually developed within the depth of 3~5m from the ground surface regardless of the location of the watertable. If rainfall is taken into consideration, it is general that the slope stability analysis is carried out under the assumption that the cut slope is saturated to the slope surface or the watertable elevates to a certain height so that ${\gamma}_{sat}$, the unit weight of saturated soil, is used. However, the analysis method mentioned above can't exactly simulate the variation of pore water pressure in the slope and yields different failure shape. The applicability of slope stability analysis method considering the distribution of pore water pressure within the slope with heavy rainfalls, was checked out after the stability analysis of a lage-scale cut slope in a highway construction site, where surface failure occurred with heavy rainfalls. An appropriate slope stabilization method is proposed on the base of the outcome of the analysis.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.527-534
• /
• 2000

136 cut slopes which extends from Namyangju to Chunchon city along the 46th national highway were investigated to analyze the influence factors affecting slope instability. Geologic and geotechnical conditions were examined and the detailed investigation were carried out for fifty five failed slopes. failure mode (wedge failure, planar failure, circular failure, sheet eroison and rock falls) are examined with respect to slope inclination, rock type, weathering grade and discontinuity patterns. It is suggested that the failure modes and their dimensions have relations to the morphology and geologic conditions of the slopes. Wedge failure has highest is the most frequent failure mode and falls, sheet erosions, planar failures and circular in descending order of failure percentage. Wedge failure is most dominant failure type over all lithology except quartzite formation. In slopes of well foliated and banded gneiss, failure ratio of wedge is up to 50% ca. Failure ratio(number of rock fall/number of total failure) of rock fall increases with increase fo slope inclinations and decrease of weathering grade. Dimension analyses of failed slopes shows wedge and circular failure has higher value of D/L and D/H than planar failure and sheet erosion.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.589-592
• /
• 2008

울산광역시 울주군 상북면에서 경상남도 밀양시 산내면을 잇는 국도 24호선은 왕복 2차선으로 기존 도로의 선형이 매우 불량하고, 위험절토사면이 집중적으로 분포되어 있다. 2002년에는 관련기관과의 연계로 울주-밀양 간 국도 24호선의 도로절토사면에 대한 현황조사가 실시되었으며, 그 중 57개소 현장은 위험절토사면으로 분류하여 추가적인 상세 현장조사가 실시되었으며, 불연속면의 방향에 관한 다양한 정보들이 취득되었다. 2002년에는 관련기관과의 연계로 울주-밀양 간 국도 24호선의 도로절토사면에 대한 현황조사가 실시되었으며, 그 중 57개소 현장은 위험절토사면으로 분류하여 추가적인 상세 현장조사가 실시되었으며, 불연속면의 방향에 관한 다양한 정보들이 되었으며, 이에 대한 길이별, 경사별 분포현황, 불연속면 발달상태 등 여러제반 특성을 살펴 보았다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.129-144
• /
• 2003

Generally, investigation methods of cut slope are conducted only geological surface survey to gain engineering geological data of cut slopes. These methods have many problems such as limitations of investigation for a special area. So geophysical investigations such as geotomography, seismic and electrical resistivity methods have been used to search for failure surface in potential failure slopes or failed slopes. But investigation method using the borehole camera is recently a used method and it is thought that this method is more reliable method than other investigation methods because of being able to see by the eyes. Therefore, this paper was conducted investigations of borings and BIPS(Borehole Image Processing System) to search for potential sliding surfaces and was applied to obtain information of discontinuity on failed and potential failure slope in highway. As the results of BIPS, we could decide potential sliding surface in the slope, conducted to check slope stability and decided slope stability measures.

• 한국환경복원기술학회지
• /
• 제7권2호
• /
• pp.12-20
• /
• 2004

This study was carried out from January 1998 to December 1999 to report the revegetation of cutting-rock slopes and a design standard in the highway cut-slopes. The field data was collected from the 67 sites cutting-rock slopes of highways, local roads, and field test. As the result of analyze, cutting-rock slopes revegetation measures were 16 types. There were Vine planting(3 types), Hydroseeding measures with seed-fertilizer-soil materials(5 types), Vegetaion-base spraying measures(5 types), and Stability measures(3 types). The factors affecting the plant coverage rates of cutting-rock slopes were the slope gradient, the slope width and direction. The plant coverage rate decreases in the condition of steep slope and long slope width and length(height). In addition, the plant coverage rates of the westward and southward were lower than that of the northward and eastward. Most dominant species were Zoysia japonica, Lespedeza cyrtobotrya, Lespedeza cuneata, Rubus crataegifolius, Miscanthus sinensis, Arrundinella hirta, Themeda triandra, and Oenothera odorata. Exotic species were Eragrostis curvula(Weeping lovegrass), Dactylis glomerata Orchardgrass), Lolium perenne(Perennial ryegrass), and Festuca arundinacea(Tall fescue). It is recommended to adjust the proposed factor as environment, topsoil, classification of rock, field condition and characteristic related with revegetation measures on slopes for the presentation of revegetation standard.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.65-81
• /
• 2003

During the last few decades in Korea, the development of hillside or mountain areas has rapidly increased for infrastructure construction such as railroads, highways and housing. Many landslides have occurred during these constructions. Also, the amount and scale of damage caused by landslides have increased every year. In the case of Far East Asia including Korea, the damage of landslides is consequently reported during the wet season. In this paper, the effect of stabilizing piles on slope stability is checked and the behavior of slope soil and piles are observed throughout the year by field measurements in the large-scale cut slopes. In particular a large-scale cut slope situated on the construction site for the express highway in Donghae, Korea. First of all, The behavior of the slope soil was measured by inclinometers during slope modification. Landslides occurred in this area due to the soil cutting for slope modification. The horizontal deformations of slope soil gradually increased and rapidly decreased at depth of sliding surface indicating that the depth of sliding surface below the ground surface can be predicted. On the basis of being able to predict the depth of the sliding surface, stabilizing piles were designed and constructed in this slope. To ensure the stability of the reinforced slope using stabilizing piles, an instrumentation system was installed. The maximum deflection of piles is measured at the pile head and it is noted that the piles deform like deflection on a cantilever beam. The maximum bending stress of piles is measured at the soil layer. The pile above the soil layer is subjected to lateral earth pressure due to driving force of the slope, while pile below soil layer is subjected to subgrade reaction against pile deflection. As a result of research, the effect and applicability of stabilizing piles in large-scale cut slopes could be confirmed sufficiently.

• 한국지형공간정보학회:학술대회논문집
• /
• 한국지형공간정보학회 2004년도 추계학술발표대회 논문집
• /
• pp.11-16
• /
• 2004

• 지질공학
• /
• 제30권4호
• /
• pp.663-671
• /
• 2020

최근 국내에서는 산림지역 뿐만 아니라 대도시지역에서도 자연재해가 많이 발생하고 있으며, 이에 대한 국가적인 요구사항은 증가하고 있다. 특히 국도 비탈면 붕괴에 대하여 체계적으로 관리할 수 있는 사전 재해정보 시스템은 전무한 실정이다. 본 연구에서는 CSMS(Cut Slope Management System)에서 관리하는 강원도와 경상도 지역의 국도 비탈면 붕괴 정밀조사 보고서와 비탈면 기초조사를 토대로 비탈면 붕괴 유발 인자에 대한 빅데이터 분석을 실시하였다. 분석 결과를 바탕으로 붕괴 비탈면 위치와 기상정보를 반영하여 분류 기반 머신러닝 모형인 Adaboost를 통한 비탈면 붕괴 위험도 예측모형을 구축하였다. 또한 시각화 프로그램인 비탈면 붕괴 위험도 시각화 지도를 개발하여 기상여건 변화에 따른 비탈면 위험도 파악을 통한 선제적 재해재난 예방대책에 활용할 수 있음을 보여주고 있다.